MINIPORT_PAUSE callback function (ndis.h)
NDIS calls a miniport driver's MiniportPause function to stop the flow of network data through a specified miniport adapter.
Syntax
MINIPORT_PAUSE MiniportPause;
NDIS_STATUS MiniportPause(
[in] NDIS_HANDLE MiniportAdapterContext,
[in] PNDIS_MINIPORT_PAUSE_PARAMETERS PauseParameters
)
{...}
Parameters
[in] MiniportAdapterContext
A handle to a context area that the miniport driver allocated in its MiniportInitializeEx function. The miniport driver uses this context area to maintain state information for a miniport adapter.
[in] PauseParameters
A pointer to an NDIS_MINIPORT_PAUSE_PARAMETERS structure that defines the pause parameters for the miniport adapter.
Return value
MiniportPause returns one of the following status values:
| Return code | Description |
|---|---|
|
MiniportPause successfully stopped the flow of network data through the miniport adapter. |
|
MiniportPause did not complete the pause operation and the operation will be completed asynchronously. The miniport driver must call the NdisMPauseComplete function when the operation is complete. |
Remarks
A driver specifies the MiniportPause entry point when it calls the NdisMRegisterMiniportDriver function.
NDIS pauses a miniport adapter to stop data flow that could interfere with PnP operations such as adding or removing a filter driver, or binding or unbinding a protocol driver.
NDIS calls a miniport driver's MiniportPause function to initiate a pause request for the miniport adapter specified at MiniportAdapterContext. The miniport adapter remains in the Pausing state until the pause operation is complete.
For a miniport adapter in the Pausing state, the miniport driver:
- Waits for all calls to the NdisMIndicateReceiveNetBufferLists function to return.
- Waits for NDIS to return the ownership of all NET_BUFFER_LIST structures from outstanding receive indications to the miniport driver's MiniportReturnNetBufferLists function.
- Completes all outstanding send requests and calls the NdisMSendNetBufferListsComplete function for all the outstanding send requests.
- Rejects all new send requests made to its MiniportSendNetBufferLists function immediately by calling NdisMSendNetBufferListsComplete. It should set the complete status in each NET_BUFFER_LIST to NDIS_STATUS_PAUSED.
- Can provide status indications with the NdisMIndicateStatusEx function.
- Should handle OID requests in the MiniportOidRequest function.
- Should not stop the miniport adapter completely if stopping the miniport adapter prevents the driver from handling requests or providing status indications.
- Should not free the resources the driver allocated during initialization.
After a miniport driver completes all outstanding send requests and NDIS returns all received network data structures (from outstanding receive indications), the driver must complete the pause operation. If the driver returns NDIS_STATUS_SUCCESS from MiniportPause, the pause operation is complete. If the driver returns NDIS_STATUS_PENDING, the miniport adapter can remain in the Pausing state and the pause operation is complete after the driver calls the NdisMPauseComplete function. After the pause operation is complete, the miniport adapter is in the Paused state.
For a miniport adapter in the Paused state, the miniport driver:
- Must reject all send requests made to MiniportSendNetBufferLists immediately by calling NdisMSendNetBufferListsComplete. It should set the Status member in each NET_BUFFER_LIST to NDIS_STATUS_PAUSED.
- Can handle receive interrupts (see the MiniportInterrupt function) and interrupt DPCs (see the MiniportInterruptDPC function), but should not indicate received network data.
- Can provide status indications with the NdisMIndicateStatusEx function.
- Should handle OID requests in the MiniportOidRequest function.
- Should handle requests to change the device power state in the MiniportDevicePnPEventNotify function.
- Can handle calls to NetTimerCallback functions.
- Can handle requests to reset the hardware in the MiniportResetEx function.
NDIS calls the MiniportRestart function to initiate a restart request for a miniport adapter that is paused.
NDIS calls MiniportPause at IRQL = PASSIVE_LEVEL.
Examples
To define a MiniportPause function, you must first provide a function declaration that identifies the type of function you're defining. Windows provides a set of function types for drivers. Declaring a function using the function types helps Code Analysis for Drivers, Static Driver Verifier (SDV), and other verification tools find errors, and it's a requirement for writing drivers for the Windows operating system.For example, to define a MiniportPause function that is named "MyPause", use the MINIPORT_PAUSE type as shown in this code example:
MINIPORT_PAUSE MyPause;
Then, implement your function as follows:
_Use_decl_annotations_
NDIS_STATUS
MyPause(
NDIS_HANDLE MiniportAdapterContext,
PNDIS_MINIPORT_PAUSE_PARAMETERS MiniportPauseParameters
)
{...}
The MINIPORT_PAUSE function type is defined in the Ndis.h header file. To more accurately identify errors when you run the code analysis tools, be sure to add the Use_decl_annotations annotation to your function definition. The Use_decl_annotations annotation ensures that the annotations that are applied to the MINIPORT_PAUSE function type in the header file are used. For more information about the requirements for function declarations, see Declaring Functions by Using Function Role Types for NDIS Drivers.
For information about Use_decl_annotations, see Annotating Function Behavior.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Supported in NDIS 6.0 and later. |
| Target Platform | Windows |
| Header | ndis.h (include Ndis.h) |
| IRQL | PASSIVE_LEVEL |