Bewerken

Delen via

IDE_ADAPTER_CONTROL callback function (irb.h)

  • Artikel

The AtaAdapterControl miniport driver routine is called to perform Plug and Play (PnP) and Power Management operations on the HBA.

Note

The ATA port driver and ATA miniport driver models may be altered or unavailable in the future. Instead, we recommend using the Storport driver and Storport miniport driver models.

Syntax

IDE_ADAPTER_CONTROL IdeAdapterControl;

BOOLEAN IdeAdapterControl(
  [in]      PVOID ControllerExtension,
  [in]      IDE_CONTROL_ACTION ControlAction,
  [in, out] PVOID Parameters
)
{...}

Parameters

[in] ControllerExtension

A pointer to the controller extension.

[in] ControlAction

One of five actions that the miniport driver must perform as defined in the following table.

ControlAction Parameters Description
IdeStart IDE_CONTROLLER_CONFIGURATION Indicates that the adapter is being started. The miniport driver should update the member in the IDE_CONTROLLER_CONFIGURATION structure. If it is required, the miniport driver could obtain its hardware resources from the IDE_CONTROLLER_CONFIGURATION structure.
IdeStop None The miniport driver should stop using any resources that are allocated for this controller. Be aware that the port driver guarantees that all the channels that are exposed by the adapter are stopped before it stops the adapter.
IdePowerUp None Indicates that the adapter is being turned on. Anything that does not persist across a power cycle must be configured during IdePowerUp.
IdePowerDown None Indicates that the adapter is being turned off.
IdeVendorDefined None Indicates that the miniport driver should perform a vendor-defined control action.

[in, out] Parameters

Parameters associated with the given action.

Return value

The miniport driver must return TRUE to acknowledge the completion of the requested action. A return value of FALSE indicates that the miniport driver was unable to complete the action successfully. A return value of FALSE for certain actions might cause the device installation to fail.

Remarks

The port driver guarantees that there is no outstanding I/O on the adapter before it invokes the AtaAdapterControl routine.

Requirements

Requirement Value
Target Platform Desktop
Header irb.h (include Irb.h)

See also

IDE_CONTROLLER_CONFIGURATION