IOCTL_SET_NUM_DEVICE_INPUT_BUFFERS IOCTL (hidclass.h)
The IOCTL_SET_NUM_DEVICE_INPUT_BUFFERS request sets the number of buffers for the input report queue of a top-level collection.
Each input report queue is implemented as a ring buffer. If a collection transmits data to the HID class driver faster than the driver can read it, some of the data may be lost. To prevent this type of loss, you can use an IOCTL_SET_NUM_DEVICE_INPUT_BUFFERS request to adjust the number of buffers that the input report queue contains. The HID class driver requires a minimum of two input buffers. On Windows 2000, the maximum number of input buffers that the HID class driver supports is 200, and on Windows XP and later, the maximum number of input buffers that the HID class driver supports is 512. The default number of input buffers is 32.
For general information about HIDClass devices, see HID Collections.
Major code
Input buffer
Irp->AssociatedIrp.SystemBuffer points to a ULONG-sized input buffer that receives the new number of buffers for the input report queue.
Parameters.DeviceIoControl.InputBufferLength in the I/O stack location of the IRP contains the size, in bytes, of the input buffer at Irp->AssociatedIrp.SystemBuffer. This size must be sizeof(ULONG).
Input buffer length
The size of a ULONG.
Output buffer
None.
Output buffer length
None.
Status block
If the request succeeds, the HID class driver sets the Status field of Irp->IoStatus to STATUS_SUCCESS; otherwise, it sets the Status field to an appropriate NTSTATUS error code.
Requirements
| Requirement | Value |
|---|---|
| Header | hidclass.h (include Hidclass.h) |