Bewerken

Delen via

IOCTL_HID_GET_INPUT_REPORT IOCTL (hidclass.h)

  • Artikel

The IOCTL_HID_GET_INPUT_REPORT request obtains an input report from a top-level collection.

For general information about HIDClass devices, see HID Collections.

Major code

IRP_MJ_DEVICE_CONTROL

Input buffer

The Parameters.DeviceIoControl.OutputBufferLength member specifies the size of a requester-allocated output buffer in bytes. The HID class driver uses this buffer to return an input report.

If the collection includes report IDs, the requester must set the first byte of the output buffer to a nonzero report ID. Otherwise, the requester must set the first byte of the output buffer to zero.

Minidriver handling

Irp->UserBuffer points to a HID_XFER_PACKET structure that the HID class driver uses to input the following members:

Input buffer length

The size of the buffer in bytes. The buffer must be large enough to hold the input report plus one additional byte that specifies a nonzero report ID. If report ID is not used, the ID value is zero.

Output buffer

The Irp->MdlAddress member points to the requester-allocated output buffer that the HID class driver uses to return the input report. The first byte of the buffer, which the requester uses to input a report ID or zero, is unchanged. The input report is returned at ((PUCHAR)Irp->MdlAddress + 1).

Minidriver handling

((PHID_XFER_PACKET)(Irp->UserBuffer))->reportBuffer points to the requester-allocated output buffer that the HID minidriver uses to return the input report.

Output buffer length

The size of the output report.

Status block

The HID class driver sets the following fields of Irp->IoStatus:

  • Information is set to zero.
  • Status is set to STATUS_SUCCESS if the transfer completed without error. Otherwise, it is set to an appropriate NTSTATUS error code.

Minidriver handling

HID minidrivers that carry out the I/O to the device set the following fields of Irp->IoStatus:

  • Information is set to the number of bytes transferred from the device.
  • Status is set to STATUS_SUCCESS if the transfer completed without error. Otherwise, it is set to an appropriate NTSTATUS error code.

HID minidrivers that call other drivers with this IOCTL to carry out the I/O to their device, should ensure that the Information field of the status block is correct and not change the contents of the Status field.

Requirements

Requirement Value
Header hidclass.h (include Hidclass.h)

See also