GPIO_WRITE_PINS_MASK_PARAMETERS structure (gpioclx.h)
The GPIO_WRITE_PINS_MASK_PARAMETERS structure describes a write operation on a bank of general-purpose I/O (GPIO) pins.
Syntax
typedef struct _GPIO_WRITE_PINS_MASK_PARAMETERS {
BANK_ID BankId;
ULONG64 SetMask;
ULONG64 ClearMask;
GPIO_WRITE_PINS_FLAGS Flags;
PVOID Reserved;
} GPIO_WRITE_PINS_MASK_PARAMETERS, *PGPIO_WRITE_PINS_MASK_PARAMETERS;
Members
BankId
The identifier for this bank of GPIO pins. If N is the number of banks in the GPIO controller, BankId is an integer in the range 0 to N–1. The GPIO framework extension (GpioClx) previously obtained the number of banks in the controller from the CLIENT_QueryControllerBasicInformation event callback function. For more information, see Remarks in CLIENT_CONTROLLER_BASIC_INFORMATION.
SetMask
A mask that specifies the GPIO pins to set in this bank. If a bit in this mask is set to 1, the GPIO controller driver sets the corresponding GPIO pin to the value 1. If N is the number of pins in this bank, the pins are numbered 0 to N–1. If bit 0 (the least significant bit) of the mask is 1, the function sets pin number 0; if bit 1 of the mask is 1, the function sets pin number 1; and so on.
ClearMask
A mask that specifies the GPIO pins to clear in this bank. If a bit in this mask is set to 1, the GPIO controller driver sets the corresponding GPIO pin to the value 0. If bit 0 of the mask is 1, the function clears pin 0; if bit 1 of the mask is 1, the function clears pin 1; and so on.
Flags
A set of flags to control the GPIO pin write operation. No flags are currently defined for this operation.
Reserved
Reserved for system use.
Remarks
The WriteParameters parameter of the CLIENT_WriteGpioPinsUsingMask event callback function is a pointer to a caller-allocated GPIO_WRITE_PINS_MASK_PARAMETERS structure.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Supported starting with Windows 8. |
| Header | gpioclx.h |
See also
CLIENT_CONTROLLER_BASIC_INFORMATION