FltReadFileEx function (fltkernel.h)
FltReadFileEx reads data from an open file, stream, or device. This function extends FltReadFile to allow the optional use of an MDL for read data instead of a mapped buffer address.
Syntax
NTSTATUS FLTAPI FltReadFileEx(
[in] PFLT_INSTANCE InitiatingInstance,
[in] PFILE_OBJECT FileObject,
[in, optional] PLARGE_INTEGER ByteOffset,
[in] ULONG Length,
[out] PVOID Buffer,
[in] FLT_IO_OPERATION_FLAGS Flags,
[out, optional] PULONG BytesRead,
[in, optional] PFLT_COMPLETED_ASYNC_IO_CALLBACK CallbackRoutine,
[in, optional] PVOID CallbackContext,
[in, optional] PULONG Key,
[in, optional] PMDL Mdl
);
Parameters
[in] InitiatingInstance
An opaque instance pointer for the minifilter driver instance that the operation is to be sent to. The instance must be attached to the volume where the file resides. This parameter is required and cannot be NULL.
[in] FileObject
A pointer to a FILE_OBJECT for the file that the data is to be read from. This file object must be currently open. Calling FltReadFileEx when the file object is not yet open or is no longer open (for example, in a pre-create or post-cleanup callback routine) causes the system to ASSERT on a checked build. This parameter is required and cannot be NULL.
[in, optional] ByteOffset
Pointer to a caller-allocated variable that specifies the starting byte offset within the file where the read operation is to begin.
If ByteOffset is specified, the I/O is performed at that offset, regardless of the current value of the file object’s CurrentByteOffset field.
- If the file was opened for synchronous I/O (FO_SYNCHRONOUS_IO is set in the file object’s Flags field), the caller can set ByteOffset->LowPart to FILE_USE_FILE_POINTER_POSITION and ByteOffset->HighPart to -1 to have the I/O performed at the file object’s CurrentByteOffset field.
- If the file wasn't opened for synchronous I/O, using FILE_USE_FILE_POINTER_POSITION is an error.
If ByteOffset isn't specified:
- If the file wasn't opened for synchronous I/O, that is an error.
- Otherwise, the I/O is performed at the file object’s CurrentByteOffset.
If the file object was opened for synchronous I/O, the CurrentByteOffset field gets updated unless the caller passes the FLTFL_IO_OPERATION_DO_NOT_UPDATE_BYTE_OFFSET flag.
- Note: the file system still updates CurrentByteOffset in this case. Filter Manager saves the CurrentByteOffset value before sending the I/O down the stack and restores it when the I/O returns. From the perspective of the caller of FltReadFileEx (and filters at higher altitudes) the CurrrentByteOffset is not updated. But filters below the caller see the updated CurrentByteOffset value in their post-read/write callbacks.
If the file object wasn't opened for synchronous I/O, the CurrentByteOffset field isn't updated regardless of the state of the ByteOffset parameter.
[in] Length
The size, in bytes, of the buffer that the Buffer parameter points to.
[out] Buffer
A pointer to a caller-allocated buffer that receives the data that is read from the file. If an MDL is provided in Mdl, Buffer must be NULL.
[in] Flags
A bitmask of flags that specify the type of read operation to be performed.
| Flag | Meaning |
|---|---|
| FLTFL_IO_OPERATION_DO_NOT_UPDATE_BYTE_OFFSET | Minifilter drivers can set this flag to specify that FltReadFile should not update the file object's CurrentByteOffset field. |
| FLTFL_IO_OPERATION_NON_CACHED | Minifilter drivers can set this flag to specify a noncached read, even if the file object was not opened with FILE_NO_INTERMEDIATE_BUFFERING. |
| FLTFL_IO_OPERATION_PAGING | Minifilter drivers can set this flag to specify a paging read. |
| FLTFL_IO_OPERATION_SYNCHRONOUS_PAGING | Minifilter drivers can set this flag to specify a synchronous paging I/O read. Minifilter drivers that set this flag must also set the FLTFL_IO_OPERATION_PAGING flag. Available starting in Windows Vista. |
[out, optional] BytesRead
A pointer to a caller-allocated variable that receives the number of bytes read from the file. If CallbackRoutine is not NULL, this parameter is ignored. Otherwise, this parameter is optional and can be NULL.
[in, optional] CallbackRoutine
Pointer to a PFLT_COMPLETED_ASYNC_IO_CALLBACK-typed callback routine to call when the read operation is complete. This parameter is optional and can be NULL.
[in, optional] CallbackContext
A context pointer to be passed to the CallbackRoutine if one is present. This parameter is optional and can be NULL. If CallbackRoutine is NULL, this parameter is ignored.
[in, optional] Key
An optional key associated with a byte range lock.
[in, optional] Mdl
An optional MDL that describes the memory where the data is read. If a buffer is provided in Buffer , then Mdl must be NULL.
Return value
FltReadFileEx returns the NTSTATUS value that was returned by the file system.
Remarks
A minifilter driver calls FltReadFileEx to read data from an open file.
FltReadFileEx creates a read request and sends it to the minifilter driver instances attached below the initiating instance, and to the file system. The specified instance and the instances attached above it do not receive the read request.
FltReadFileEx performs noncached I/O if either of the following is true:
The caller set the FLTFL_IO_OPERATION_NON_CACHED flag in the Flags parameter.
The file object was opened for noncached I/O. Usually, this is done by specifying the FILE_NO_INTERMEDIATE_BUFFERING CreateOptions flag in the preceding call to FltCreateFile, FltCreateFileEx, or ZwCreateFile.
Noncached I/O imposes the following restrictions on the parameter values passed to FltReadFileEx:
The buffer that the Buffer parameter points to must be aligned in accordance with the alignment requirement of the underlying storage device. To allocate such an aligned buffer, call FltAllocatePoolAlignedWithTag.
The byte offset that the ByteOffset parameter points to must be a nonnegative multiple of the volume's sector size.
The length specified in the Length parameter must be a nonnegative multiple of the volume's sector size.
If an attempt is made to read beyond the end of the file, FltReadFileEx returns an error.
If the value of the CallbackRoutine parameter is not NULL, the read operation is performed asynchronously.
If the value of the CallbackRoutine parameter is NULL, the read operation is performed synchronously. That is, FltReadFileEx waits until the read operation is complete before returning. This is true even if the file object that FileObject points to was opened for asynchronous I/O.
If multiple threads call FltReadFileEx for the same file object, and the file object was opened for synchronous I/O, the filter manager does not attempt to serialize I/O on the file. In this respect, FltReadFileEx differs from ZwReadFile.
The Mdl parameter is provided as a convenience when a minifilter already has an MDL available. The MDL is used directly and the additional step of mapping an address for Buffer can be avoided.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 8 |
| Target Platform | Universal |
| Header | fltkernel.h (include Fltkernel.h) |
| Library | FltMgr.lib |
| DLL | Fltmgr.sys |
| IRQL | PASSIVE_LEVEL |