Bewerken

Delen via

DXVA_Status_AV1 structure (dxva.h)

  • Artikel

The DXVA_Status_AV1 structure is sent by the accelerator to the host software decoder to convey decoding status information.

Syntax

typedef struct _DXVA_Status_AV1 {
  UINT              StatusReportFeedbackNumber;
  DXVA_PicEntry_AV1 CurrPic;
  UCHAR             BufType;
  UCHAR             Status;
  UCHAR             Reserved8Bits;
  USHORT            NumMbsAffected;
} DXVA_Status_AV1, *LPDXVA_Status_AV1;

Members

StatusReportFeedbackNumber

Contains the value of StatusReportFeedbackNumber set by the host software decoder in the DXVA_PicParams_AV1 structure for the associated operation.

CurrPic

The uncompressed destination surface that was affected by the operation.

BufType

The type of compressed buffer associated with this status report. If Status is 0, bBufType may be 0xFF, which indicates that the status report applies to all of the compressed buffers conveyed in the associated Execute call. Otherwise, if bBufType is not 0xFF, it must contain one of the following values, defined in dxva.h:

Value Description
DXVA_PICTURE_DECODE_BUFFER (1) Picture decoding parameter buffer.
DXVA_SLICE_CONTROL_BUFFER (6) Slice control buffer.
DXVA_BITSTREAM_DATA_BUFFER (7) Bitstream data buffer.

Status

The status of the operation. Status can be one of the following values:

Value Description
0 The operation succeeded.
1 Minor problem in the data format. The host decoder should continue processing.
2 Significant problem in the data format. The host decoder may continue executing or skip the display of the output picture.
3 Severe problem in the data format. The host decoder should restart the entire decoding process, starting at a sequence or random-access entry point.
4 Other severe problem. The host decoder should restart the entire decoding process, starting at a sequence or random-access entry point.

If the value is 3 or 4, the host software decoder should halt the decoding process unless it can take corrective action.

Reserved8Bits

Reserved; set to 0. The accelerator ignores this field.

NumMbsAffected

If Status is not 0, this member contains the accelerator's estimate of the number of super-blocks in the decoded frame that were adversely affected by the reported problem. If the accelerator does not provide an estimate, the value is 0xFFFF.

If Status is 0, the accelerator may set NumMbsAffected to the number of super-blocks that were successfully decoded by the operation. If the accelerator does not provide an estimate, it shall set the value either to 0 or to 0xFFFF.

Remarks

See the Direct X Video Acceleration Specification for AV1 Video Coding for detailed information, including how to use this structure.

Requirements

Requirement Value
Minimum supported server Windows Server 2022
Header dxva.h