DXVA_BlendCombination structure (dxva.h)
The DXVA_BlendCombination structure is sent by the host decoder to the accelerator to specify how a blended picture is created from a source picture and a graphic image with accompanying alpha-blending information.
Syntax
typedef struct _DXVA_BlendCombination {
WORD wPictureSourceIndex;
WORD wBlendedDestinationIndex;
RECT PictureSourceRect16thPel;
RECT PictureDestinationRect;
RECT GraphicSourceRect;
RECT GraphicDestinationRect;
WORD wBlendDelay;
BYTE bBlendOn;
BYTE bWholePlaneAlpha;
DXVA_AYUVsample2 OutsideYUVcolor;
} DXVA_BlendCombination, *LPDXVA_BlendCombination;
Members
wPictureSourceIndex
Specifies the uncompressed surface index, as defined by the contents of the DWORD pointed to by the lpInputData member of DD_BEGINMOCOMPFRAMEDATA in a prior call to DdMoCompBeginFrame, of the picture to be combined with the graphic. This value is 0xFFFF if back-end hardware alpha blending is in use (when the bConfigBlendType member of DXVA_ConfigAlphaCombine is 1).
wBlendedDestinationIndex
Specifies the uncompressed surface index, as defined by the contents of the DWORD pointed to by the lpInputData member of DD_BEGINMOCOMPFRAMEDATA in a prior call to DdMoCompBeginFrame, of the combined picture to be created. This value is 0xFFFF if back-end hardware alpha blending is in use (when the bConfigBlendType member of DXVA_ConfigAlphaCombine is 1).
This value cannot be equal to wPictureSourceIndex unless back-end hardware alpha blending is in use.
PictureSourceRect16thPel
Specifies the area of the source picture to be combined with the graphic image as a RECT structure. Dimensions are specified in units of one-sixteenth of the distance between sample values of the luminance component. (In other words, the members in the RECT structure are fixed-point representations that have 28 bits before the binary point and 4 bits after the binary point.) This one-sixteenth sample accuracy allows PictureSourceRect16thPel to contain the same accuracy as the frame_centre_horizontal_offset and frame_centre_vertical_offset pan-scan variables in MPEG-2 video.
If the bConfigPictureResizing member of DXVA_ConfigAlphaCombine is zero, all dimensions in PictureSourceRect16thPel must be integer multiples of 16.
PictureDestinationRect
Specifies the area of the destination picture as a RECT structure. This will contain the area defined for the source picture by PictureSourceRect16thPel.
If the bConfigPictureResizing member of DXVA_ConfigAlphaCombine is zero, the area specified by PictureDestinationRect must have the same width and height as the area specified by PictureSourceRect16thPel. If PictureDestinationRect differs in size from PictureSourceRect16thPel, the resampling method to be applied is not specified, but must have a quality that is at least equivalent to that of bilinear resampling.
GraphicSourceRect
Specifies the area of the source graphic image as a RECT structure. This area is combined with the part of the source picture specified by PictureSourceRect16thPel to create the alpha-blended picture.
GraphicDestinationRect
Specifies the area of the destination graphic image as a RECT structure.
If the bConfigGraphicResizing member of DXVA_ConfigAlphaCombine is zero, the destination picture must have the same width and height as the area specified by GraphicSourceRect. If GraphicDestinationRect differs in size from GraphicSourceRect, the resampling method to be applied to the graphic image is not specified. However, the resampling method used should have a quality that is at least equivalent to a bilinear resampling of an AYUV surface that represents the blending information.
wBlendDelay
Specifies the number of milliseconds of delay prior to the blending combination going into effect. If back-end hardware blending is in use (for example, if the bConfigBlendType member of DXVA_ConfigAlphaCombine is 1), wBlendDelay contains the number of milliseconds of delay prior to the blending combination going into effect. If front-end blending is in use, this member has no meaning and must be zero.
bBlendOn
Specifies when a blending combination operation starts and stops. If back-end hardware blending is in use, blending is applied from the time specified in a blending combination operation (with bBlendOn equal to 1) until the execution time of a new blending combination (with bBlendOn equal to 1), or until the blending is disabled by a blending combination operation (with bBlendOn equal to zero). If back-end hardware blending is in use and bBlendOn is zero, the only other value in the alpha-blend combination buffer that has meaning is wBlendDelay. If front-end blending is in use, this member has no meaning and must be zero .
bWholePlaneAlpha
Contains an opacity multiplier for the alpha channel of the graphic image. The value zero indicates that the graphic image is transparent (so that the graphic content has no effect on the resulting blended picture). The value 255 indicates that the graphic image uses its full sample opacity. If bWholePlaneAlpha is not equal to zero, the blend specified is to multiply the opacity of each location in the graphic content by (bWholePlaneAlpha+1)/256. For a zero value of bWholePlaneAlpha, the blend to use is the opacity specified in the graphic image without alteration. This must be equal to 255 if the bConfigWholePlaneAlpha member of DXVA_ConfigAlphaCombine is zero.
OutsideYUVcolor
Indicates whether areas outside of the PictureDestinationRect use a constant color for blending. If so, this member specifies that color constant. The OutsideYUVcolor member is defined as a DXVA_AYUVsample2 structure. See the Remarks section for more information.
Remarks
In the event that the source and destination pictures are not in 4:4:4 format, every second sample of the graphic blending information (for example, the first, third, or fifth) is applied to the subsampled source chrominance information in the vertical or horizontal direction as needed to produce the blended result.
The following sections show the restrictions placed on the left, right, top, and bottom members of the RECT structure.
RECT Structure Restrictions for PictureSourceRect16thPel
The following restrictions apply to the RECT dimensions of PictureSourceRect16thPel:- left and top must be greater than or equal to zero.
- right and bottom must be greater than or equal to left and top, respectively.
- If right is equal to left or top is equal to bottom, all the RECT members must have the value zero indicating that the source picture is not used. This case is allowed only if the bConfigOnlyUsePicDestRectArea member of DXVA_ConfigAlphaCombine is zero.
- right and bottom must not exceed 16 times the allocated width and height, respectively, of the uncompressed source picture surface.
- left = 0
- top = 0
- right = 16 X horizontal_size
- bottom = 16 X vertical_size
RECT Structure Restrictions for PictureDestinationRect
The following restrictions apply to the RECT dimensions for PictureDestinationRect:- left and top must be greater than or equal to zero.
- right and bottom must be greater than or equal to left and top, respectively.
- If right is equal to left or top is equal to bottom (only allowed if the bConfigOnlyUsePicDestRectArea member of DXVA_ConfigAlphaCombine is zero), all of the RECT members must have the value zero and PictureSourceRect16thPel must also specify all values having the value zero.
- If the bConfigBlendType member of DXVA_ConfigAlphaCombine is zero, right and bottom must not exceed the allocated width and height, respectively, of the uncompressed destination picture surface.
- If the bConfigBlendType member of DXVA_ConfigAlphaCombine is 1, right and bottom must not exceed the allocated width and height, respectively, of the source graphic surface.
RECT Structure Restrictions for GraphicSourceRect
If alpha-blend data loading uses the bConfigDataType member of DXVA_ConfigAlphaLoad with a value of 2, the following restrictions apply to the RECT dimensions of GraphicSourceRect:- top and left must be zero.
- right must be equal to the End X-coordinate minus the Start X-coordinate of the last preceding DVD SET_DAREA DCCMD, plus 1, to adjust for the differing rectangle interpretations as described in the following note in the RECT Structure Restrictions for GraphicDestinationRect section.
- bottom must be equal to the End Y-coordinate minus the Start Y-coordinate of the last preceding DVD SET_DAREA DCCMD, plus 1, to adjust for the differing rectangle interpretations.
- left and top must be greater than or equal to zero.
- right and bottom must be greater than or equal to left and top, respectively.
- If right is equal to left or top is equal to bottom, all the RECT members must have the value zero, indicating no use of the graphic picture.
- right and bottom must not exceed the allocated width and height, respectively, of the graphic source image. The allocated width and height are defined as 720 and 576 samples, respectively, when the bConfigDataType member of DXVA_ConfigAlphaLoad equals 2.
RECT Structure Restrictions for GraphicDestinationRect
The following restrictions apply to the RECT dimensions of GraphicDestinationRect:- left and top must be greater than or equal to zero, unless this requirement conflicts with the need to offset the graphic by eight samples. This is the case in the following scenarios:
- Alpha-blend data loading uses the bConfigDataType member of DXVA_ConfigAlphaCombine with a value of 2 and the bConfigGraphicResizing member of DXVA_ConfigAlphaCombine with a value of zero.
- Operation is set for DVD 704-Wide Non-Pan-Scan (see DVD 704-Wide Non-Pan-Scan Example).
- Operation is set for DVD 352-wide (see DVD 352-Wide Example).
- right and bottom must be greater than or equal to left and top, respectively. If right is equal to left or top is equal to bottom, then all these members of the RECT structure must have the value zero and GraphicSourceRect must also specify that all its members have the value zero.
- If the bConfigBlendType member of DXVA_ConfigAlphaCombine equals zero, right and bottom must not exceed the allocated width and height, respectively, of the uncompressed destination picture surface.
- If the bConfigBlendType member of DXVA_ConfigAlphaCombine equals 1, right and bottom must not exceed the allocated width and height, respectively, of the source graphic image.
- top must be equal to the Start Y-coordinate of the last preceding DVD SET_DAREA DCCMD.
- left must be equal to either the Start X-coordinate of the last preceding DVD SET_DAREA DCCMD or to that value minus 8. For more information, see DVD 704-Wide Non-Pan-Scan Example and DVD 352-Wide Example.
- right must be equal to the value of left, plus the End X-coordinate minus the Start X-coordinate of the last preceding DVD SET_DAREA DCCMD, plus 1, to adjust for the differing rectangle interpretations described in the following note.
- bottom must be equal to the value of top plus the End Y-coordinate minus the Start Y-coordinate of the last preceding DVD SET_DAREA DCCMD, plus 1, to adjust for the differing rectangle interpretations described in the following note.
Setting OutsideYUVcolor Values
The values for the OutsideYUVcolor structure are as follows:- The value of OutsideYUVcolor.bSampleAlpha8 must be 255 if the areas outside of the PictureDestinationRect are generated as a constant color to use for blending.
- The value of OutsideYUVcolor.bSampleAlpha8 must be zero if either of the following two cases applies:
- The areas outside of the PictureDestinationRect are unaffected by the blend.
- The areas outside of the PictureDestinationRect cannot be used (as indicated by the bConfigStayInPicDestRectArea member of DXVA_ConfigAlphaCombine having a value of 1).
The value of OutsideYUVcolor.bSampleAlpha8 must be zero if the bConfigStayInPicDestRectArea member of the DXVA_ConfigAlphaCombine structure equals 1.
If OutsideYUVcolor.bSampleAlpha8 is zero, the only area of the destination surface that is affected by the blend is the part within the PictureDestinationRect.
If OutsideYUVcolor.bSampleAlpha8 is 255, any area of the destination surface that is outside of PictureDestinationRect but within GraphicDestinationRect, is generated by blending the graphic with the color specified in the nonalpha members of OutsideYUVcolor. In this case, the entire allocated area of the destination surface that falls outside of both PictureDestinationRect and GraphicDestinationRect is set to the color specified in the nonalpha members of OutsideYUVcolor. If the bConfigBlendType member of the DXVA_ConfigAlphaCombine structure is 1, the OutsideYUVcolor members are set to indicate blending with black by specifying bSampleAlpha8 = 255, bY_Value = 16, and bCbValue = bCrValue = 128.
When the bConfigBlendType member of the DXVA_ConfigAlphaCombine structure is 1 (back-end hardware blend), blending operations may differ somewhat from those described in this reference. Some resizing parameters used to map a video picture from a source picture to a destination picture size may be applied in a modified manner to map the graphic image to its proper location relative to the source picture. However, the blended result will be equivalent to the blended result obtained by the alpha-blend combination commands in this reference.
Requirements
| Requirement | Value |
|---|---|
| Header | dxva.h (include Dxva.h) |