D3DKMDT_DISPLAYMODE_FLAGS structure (d3dkmthk.h)
The D3DKMDT_DISPLAYMODE_FLAGS structure identifies attributes of a display mode.
Syntax
typedef struct _D3DKMDT_DISPLAYMODE_FLAGS {
#if ...
BOOLEAN ValidatedAgainstMonitorCaps : 1;
#if ...
BOOLEAN RoundedFakeMode : 1;
#if ...
[in] D3DKMDT_MODE_PRUNING_REASON ModePruningReason : 4;
#if ...
UINT Reserved : 28;
#else
UINT ValidatedAgainstMonitorCaps : 1;
#endif
#else
UINT RoundedFakeMode : 1;
#endif
#else
[in] D3DKMDT_MODE_PRUNING_REASON ModePruningReason : 4;
#endif
[in] UINT Stereo : 1;
[in] UINT AdvancedScanCapable : 1;
#elif
UINT Reserved : 26;
UINT PreferredTiming : 1;
UINT PhysicalModeSupported : 1;
#elif
UINT Reserved : 24;
UINT VirtualRefreshRate : 1;
#else
UINT Reserved : 23;
#endif
} D3DKMDT_DISPLAYMODE_FLAGS;
Members
ValidatedAgainstMonitorCaps
A Boolean value that specifies whether the display mode is supported by the monitor that the display mode will be displayed on.
Setting this member is equivalent to setting the first bit of a 32-bit value (0x00000001).
A UINT value that specifies whether the display mode is supported by the monitor that the display mode will be displayed on.
Setting this member is equivalent to setting the first bit of a 32-bit value (0x00000001).
Supported starting with Windows 8.
RoundedFakeMode
A Boolean value that specifies whether the display mode is rounded.
Setting this member is equivalent to setting the second bit of a 32-bit value (0x00000002).
A UINT value that specifies whether the display mode is rounded.
Setting this member is equivalent to setting the second bit of a 32-bit value (0x00000002).
Supported starting with Windows 8.
[in] ModePruningReason
A value of type D3DKMDT_MODE_PRUNING_REASON that identifies the reason why the monitor either supports the display mode or does not support the display mode. The four bits are defined by one of the values in the D3DKMDT_MODE_PRUNING_REASON enumeration type and depend on the setting of the ValidatedAgainstMonitorCaps member. For more information about how the ModePruningReason value is set, see D3DKMDT_MODE_PRUNING_REASON.
Setting this member is equivalent to setting bits 4 through 7 of a 32-bit value (0x0000003C).
[in] A value of type D3DKMDT_MODE_PRUNING_REASON that identifies the reason why the monitor either supports the display mode or does not support the display mode. The four bits are defined by one of the values in the D3DKMDT_MODE_PRUNING_REASON enumeration type and depend on the setting of the ValidatedAgainstMonitorCaps member. For more information about how the ModePruningReason value is set, see D3DKMDT_MODE_PRUNING_REASON. This member is equivalent to bits 4 through 7 of a 32-bit value (0x0000003C).
Supported starting with Windows 8.
Reserved
This member is reserved and should be set to zero. Setting this member is equivalent to setting the remaining 28 bits (0xFFFFFFF0) of a 32-bit value to zeros.
This member is reserved and should be set to zero.
Setting this member is equivalent to setting the remaining 26 bits (0xFFFFFFC0) of a 32-bit value to zeros.
Supported starting with Windows 8.
[in] Stereo
A UINT value that specifies whether stereo is supported by the monitor that the display mode will be displayed on.
Setting this member is equivalent to setting the eighth bit of a 32-bit value (0x00000080).
Supported starting with Windows 8.
[in] AdvancedScanCapable
A UINT value that specifies whether the driver supports the advanced scan capability.
The driver reports support for this option in the current display mode by setting the Type member of the D3DKMDT_VIDPN_SOURCE_MODE structure to D3DKMDT_RMT_GRAPHICS_STEREO_ADVANCED_SCAN. Setting this member is equivalent to setting the ninth bit of a 32-bit value (0x00000100).
Supported starting with Windows 8.
PreferredTiming
A UINT value that specifies whether the driver supports preferred timing.
PhysicalModeSupported
A UINT value that specifies whether the driver supports physical mode.
VirtualRefreshRate
A UINT value that specifies whether the driver supports virtual refresh rate.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows Vista |
| Header | d3dkmthk.h (include D3dkmthk.h) |