Bewerken

Delen via

Replication, change tracking, & change data capture - Always On availability groups

  • Artikel

Applies to: SQL Server

SQL Server Replication, change data capture (CDC), and change tracking (CT) are supported on Always On availability groups. Always On availability groups helps provide high availability and other database recovery capabilities.

Overview of replication with availability groups

Publisher Redirection

When a published database is aware of Always On availability groups, the distributor that provides agent access to the publishing database is configured with redirected_publishers entries. These entries redirect the originally configured publisher/database pair, making use of an availability group listener name to connect to the publisher and publishing database. Established connections through the availability group listener name will fail on failover. When the replication agent restarts after failover, the connection will automatically be redirected to the new primary.

In an availability group, a secondary database cannot be a publisher. Republishing is only supported when transactional replication is combined with Always On availability groups.

If a published database is a member of an availability group and the publisher is redirected, it must be redirected to an availability group listener name associated with the availability group. It may not be redirected to an explicit node.

Note

After failover to a secondary replica, Replication Monitor is unable to adjust the name of the publishing instance of SQL Server and will continue to display replication information under the name of the original primary instance of SQL Server. After failover, a tracer token cannot be entered by using the Replication Monitor, however a tracer token entered on the new publisher by using Transact-SQL, is visible in Replication Monitor.

General changes to replication agents to support availability groups

Three replication agents were modified to support Always On availability groups. The Log Reader, Snapshot, and Merge agents were modified to query the distribution database for the redirected publisher and to use the returned availability group listener name, if a redirected publisher was declared, to connect to the database publisher.

By default, when the agents query the distributor to determine whether the original publisher has been redirected, the suitability of the current target or redirection will be verified prior to returning the redirected host to the agent. This behavior is recommended. However, if agent startup occurs frequently the overhead associated with the validation stored procedure may be deemed too costly. A new command-line switch, BypassPublisherValidation, has been added to the Log reader, Snapshot, and Merge agents. When the switch is used, the redirected publisher is returned immediately to the agent and execution of the validation stored procedure is bypassed.

Failures returned from the validation stored procedure are logged in the agent history logs. Those errors with severity greater than or equal to 16 will cause the agents to terminate. Some retry capabilities have been built in to the agents to handle the expected disconnect from a published database when it fails over to a new primary.

Log Reader Agent Modifications

The Log reader Agent has the following changes.

  • Replicated Database Consistency

    When a published database is a member of an availability group, by default the log reader will not process log records that have not already been hardened at all availability group secondary replicas. This ensures that on failover, all rows replicated to a subscriber also are present at the new primary.

    When the publisher has only two availability replicas (one primary and one secondary) and a failover happens, the original primary replica remains down because the log reader does not move forward until all secondary databases are brought back online or until the failing secondary replicas are removed from the availability group. The log reader, now running against the secondary database, will not proceed forward since Always On cannot harden any changes to any secondary database. To allow the log reader to proceed further and still have disaster recovery capacity, remove the original primary replica from the availability group using ALTER AVAILABITY GROUP <group_name> REMOVE REPLICA. Then add a new secondary replica to the availability group.

  • Trace flag 1448

    Trace flag 1448 enables the replication log reader to move forward even if the asynchronous secondary replicas have not acknowledged the reception of a change. Even with this trace flag enabled, the log reader always waits for the synchronous secondary replicas(They could become asynchronous commit mode as documented here, so log reader can move forward.). The log reader will not go beyond the min ack of the synchronous secondary replicas. This trace flag applies to the instance of SQL Server, not just to an availability group, an availability database, or a log reader instance. This trace flag takes effect immediately without a restart. It can be activated ahead of time or when an asynchronous secondary replica fails.

Stored procedures supporting availability groups

  • sp_redirect_publisher

    The stored procedure sp_redirect_publisher is used to specify a redirected publisher for an existing publisher/database pair. If the publisher database belongs to an availability group, the redirected publisher is the availability group listener name.

  • sp_get_redirected_publisher

    The stored procedure sp_get_redirected_publisher is used by replication agents to query a distributor to determine whether a publisher/database pair has a defined redirected publisher. This stored procedure serves two purposes. First, it allows the agent to determine whether the original publisher has been redirected. Second, it may also initiate a validation stored procedure run at the distributor (sp_validate_redirected_publisher) that verifies the suitability of the target node of the redirection to serve as a publisher for the named database.

    To execute this stored procedure the caller must either be a member of the sysadmin server role, the db_owner database role for the distribution database, or a member of a Publication Access List for a defined publication associated with the publisher database.

  • sp_validate_redirected_publisher

    This stored procedure attempts to validate that the current publisher is capable of hosting the published database. It can be called at any time to verify that the current host for the published database is capable of supporting replication.

  • sp_validate_replicate_hosts_as_publishers

    While it is useful for the agents to ensure that the current primary can function as the replication publisher for a publisher database, a more general validation capability is needed to establish the validity of an entire replication topology on an Always On availability database. The stored procedure sp_validate_replica_hosts_as_publishers is designed to fill this need.

    This stored procedure is always run manually. The caller must either be sysadmin at the distributor, dbowner of the distribution database, or a member of the Publication Access List of a publication of the publisher database. In addition, the login of the caller must be a valid login for all of the availability replica hosts, and have select privileges on the availability database associated with the publisher database.

Change Data Capture

Databases enabled for change data capture (CDC) are able to use Always On availability groups in order to ensure not only that the database remains available in the event of failure, but that changes to the database tables continue to be monitored and deposited in the CDC change tables. The order in which CDC and Always On availability groups are configured is not important. CDC enabled databases can be added to Always On availability groups, and databases that are members of an Always On availability group can be enabled for CDC. In both cases, however, CDC configuration is always performed on the current or intended primary replica. CDC uses the log reader agent and has the same limitations as described in the Log Reader Agent Modifications section earlier in this topic.

  • Harvesting Changes for Change Data Capture Without Replication

    If CDC is enabled for a database, but replication is not, the capture process used to harvest changes from the log and deposit them in CDC change tables runs at the CDC host as its own SQL Agent job.

    In order to resume the harvesting of changes after failover, the stored procedure sp_cdc_add_job must be run at the new primary to create the local capture job.

    The following example creates the capture job.

    EXEC sys.sp_cdc_add_job @job_type = 'capture';

  • Harvesting Changes for Change Data Capture With Replication

    If both CDC and replication are enabled for a database, the log reader handles the population of the CDC change tables. In this case, the techniques used by replication to use Always On availability groups will ensure that changes continue to be harvested from the log and deposited in CDC change tables after failover. Nothing more needs to be done for CDC in this configuration to ensure that the change tables are populated.

  • Change Data Capture Cleanup

    To ensure that appropriate cleanup occurs at the new primary database, a local cleanup job should always be created. The following example creates the cleanup job.

    EXEC sys.sp_cdc_add_job @job_type = 'cleanup';

    Note

    You should create the jobs at the new primary replica after failover. The CDC jobs running at the old primary database should be disabled when the local database becomes a secondary database. Post this if the replica becomes primary again, you need to reenable the CDC jobs on the replica. To disable and enable jobs, use the @enabled option of sp_update_job (Transact-SQL). For more information about creating CDC jobs, see sys.sp_cdc_add_job (Transact-SQL).

  • Adding CDC Roles to an Always On Primary Database Replica

    When a table is enabled for CDC, it is possible to associate a database role with the capture instance. If a role is specified, the user wishing to use the CDC table-valued functions to access changes for the table must not only have select access to the tracked table columns, but must also be a member of the named role. If the specified role does not already exist, the role will be created. When database roles are automatically added to an Always On primary database, the roles are also propagated to the secondary databases of the availability group.

  • Client Applications Accessing CDC Change Data and Always On

    Client applications that use the table-valued functions (TVFs) or linked servers to access change table data also need the ability to locate an appropriate CDC host after failover. The availability group listener name is the mechanism provided by Always On availability groups to transparently allow a connection to be retargeted to a different host. Once an availability group listener name is associated with an availability group, it is available to be used in TCP connection strings. Two different connection scenarios are supported through the availability group listener name.

    • One ensures that connection requests are always directed to the current primary replica.

    • One ensures that connection requests are directed to a read-only secondary replica.

    If used to locate a read-only secondary replica, a read-only routing list must also be defined for the availability group. For more information about routing access to readable secondaries, see To Configure Availability Replicas for Read-Only Routing.

    Note

    There is some propagation delay associated with the creation of an availability group listener name and its use by client applications to access an availability group database replica.

    Use the following query to determine whether an availability group listener name has been defined for the availability group hosting a CDC database. The query will return the availability group listener name if one has been created.

    SELECT dns_name   
FROM sys.availability_group_listeners AS l  
INNER JOIN sys.availability_databases_cluster AS d  
    ON l.group_id = d.group_id  
WHERE d.database_name = N'MyCDCDB';

  • Redirecting the Query Load to a Readable Secondary Replica

    While in many cases a client application will always want to connect to the current primary replica, that is not the only way to use Always On availability groups. If an availability group is configured to support readable secondary replicas, change data can also be gathered from secondary nodes.

    When an availability group is configured, the ALLOW_CONNECTIONS attribute associated with the SECONDARY_ROLE is used to specify the type of secondary access supported. If configured as ALL, all connections to the secondary will be allowed, but only those requiring read-only access will succeed. If configured as READ_ONLY, it is necessary to specify read only intent when making the connection to the secondary database in order for the connection to succeed. For more information, see Configure Read-Only Access on an Availability Replica (SQL Server).

    The following query can be used to determine whether read-only intent is needed to connect to a readable secondary replica.

    SELECT g.name AS AG, replica_server_name, secondary_role_allow_connections_desc  
FROM sys.availability_replicas AS r  
JOIN sys.availability_groups AS g  
    ON r.group_id = g.group_id  
WHERE g.name = N'MY_AG_NAME';

    Either the availability group listener name or the explicit node name can be used to locate the secondary replica. If the availability group listener name is used, access will be directed to any suitable secondary replica.

    When sp_addlinkedserver is used to create a linked server to access the secondary, the @datasrc parameter is used for the availability group listener name or the explicit server name, and the @provstr parameter is used to specify read-only intent.

    EXEC sp_addlinkedserver   
@server = N'linked_svr',   
@srvproduct=N'SqlServer',  
@provider=N'MSOLEDBSQL',   
@datasrc=N'AG_Listener_Name',   
@provstr=N'ApplicationIntent=ReadOnly',   
@catalog=N'MY_DB_NAME';

  • Client Access to CDC Change Data and Domain Logins

    In general, you should use domain logins for client access to change data residing in databases that are members of Always On availability groups. To ensure continued access to change data after failover, the domain user will need access privileges on all of the hosts supporting availability group replicas. If a database user is added to a database in a primary replica, and the user is associated with a domain login, the database user is propagated to secondary databases and continues to be associated with the specified domain login. If the new database user is associated with a SQL Server authentication login, the user at the secondary databases will be propagated without a login. While the associated SQL Server authentication login could be used to access change data at the primary where the database user was originally defined, that node is the only one where access would be possible. The SQL Server authentication login would not be able to access data from any secondary database, nor from any new primary databases other than the original database where the database user was defined.

  • Disabling Change Data Capture
    If you need to disable Change Data Capture (CDC) on a database that is part of an Always On availability group and you're on SQL Server 2016 SP2 or later, you don't need to perform any additional steps for automatic log truncation. If you're on an earlier version than SQL Server 2016 SP2 and you disable CDC on a database that is part of an availability group, then you will need to implement one of the following steps to prevent blocking log truncation after CDC is disabled:

    • Restart the SQL Server service on every secondary replica instance.
    • Remove the database from all the secondary replica instances of the availability group and then add it back to each availability group replica instance using automatic or manual seeding.

Change Tracking

A database enabled for change tracking (CT) can be part of an Always On availability group. No more configuration is needed. Change tracking client applications that use the CDC table-valued functions (TVFs) to access change data will need the ability to locate the primary replica after failover. If the client application connects through the availability group listener name, connection requests will always be appropriately directed to the current primary replica.

Note

Change tracking data must always be obtained from the primary replica. An attempt to access change data from a secondary replica will result in the following error:

Msg 22117, Level 16, State 1, Line1

For databases that are members of a secondary replica (that is, for secondary databases), change tracking is not supported. As an alternative to running change tracking queries on the primary replica, you can create a database snapshot of an AG database from the secondary replica and then use that to query change data. A database snapshot is a read-only, static view of a SQL Server database (the source database), so change tracking data in the database snapshot will be of the time when the snapshot was taken on the AG database from the secondary replica.

Note

When a failover occurs on a database with Change Tracking enabled, recovery time on the new primary replica may take longer than usual as Change Tracking requires a full database restart.

Prerequisites, Restrictions, and Considerations for Using Replication

This section describes considerations for deploying replication with Always On availability groups, including prerequisites, restrictions, and recommendations.

Prerequisites

  • When using transactional replication and the publishing database is in an availability group, both the publisher and the distributor must run at least SQL Server 2012 (11.x). The subscriber can be using a lower level of SQL Server.

  • When using merge replication and the publishing database is in an availability group:

    • Push subscription: Both the publisher and the distributor must run at least SQL Server 2012 (11.x).

    • Pull subscription: The publisher, distributor, and subscriber databases must be on at least SQL Server 2012 (11.x). This is because the merge agent on the subscriber must understand how an availability group can fail over to its secondary.

  • The Publisher instances satisfy all the prerequisites required to participate in an Always On availability group. For more information, see Prerequisites, Restrictions, and Recommendations for Always On Availability Groups (SQL Server).

Restrictions

Supported combinations of replication on Always On availability groups:

Replication Publisher Distributor1 Subscriber
Transactional Yes

Note: Does not include support for bi-directional and reciprocal transactional replication.		 Yes Yes
Peer-to-peer2 Yes Yes3 Yes
Merge Yes No No
Snapshot Yes No Yes
Updatable Subscriptions - For Transactional Replication No No No

1 The Distributor database is not supported for use with database mirroring.

2 Requires SQL Server 2019 CU 13 or later.

3 Requires SQL Server 2019 CU 17 or later.

Considerations

  • The distribution database is not supported for use with database mirroring but is supported with Always On availability groups subject to certain limitations, see Configure Distribution Availability Group. Replication configuration is coupled to the SQL Server instance where the Distributor is configured; therefore the distribution database cannot be mirrored or replicated. It is also possible to provide high availability for the Distributor using a SQL Server failover cluster. For more information, see Always On Failover Cluster Instances (SQL Server).

  • Subscriber failover to a secondary database, while supported, is a manual procedure for merge replication subscribers. The procedure is essentially identical to the method used to fail over a mirrored subscriber database. Transactional replication subscribers do not need special handling while participating in Always On availability groups. Subscribers must be running SQL Server 2012 (11.x) or later to participate in an availability group. For more information, see Replication Subscribers and Always On Availability Groups (SQL Server)

  • Metadata and objects that exist outside the database are not propagated to the secondary replicas, including logins, jobs, linked servers. If you require the metadata and objects at the new primary database after failover, you must copy them manually. For more information, see Management of Logins and Jobs for the Databases of an Availability Group (SQL Server).

Distributed Availability Groups

The publisher, or distribution database in an Availability Group cannot be configured as part of a Distributed Availability Group. The publisher database in an Availability Group and the distribution database in an Availability Group both require a listener endpoint for proper configuration and usage. However, it is not possible to configure a listener endpoint for a Distributed Availability group.

Related Tasks

Replication

Change data capture

Change tracking

See Also

Replication Subscribers and Always On Availability Groups (SQL Server)
Prerequisites, Restrictions, and Recommendations for Always On Availability Groups (SQL Server)
Overview of Always On Availability Groups (SQL Server)
Always On Availability Groups: Interoperability (SQL Server)
Always On Failover Cluster Instances (SQL Server)
About Change Data Capture (SQL Server)
About Change Tracking (SQL Server)
SQL Server Replication
Track Data Changes (SQL Server)
sys.sp_cdc_add_job (Transact-SQL)