D3D Cross Proc Sharing
This automated test verifies support for the cross-process resource sharing in Microsoft® Direct3D® version 9.
This topic applies to the following test jobs:
D3D Cross Proc Sharing
D3D Cross Proc Sharing (WoW64)
Test details
Associated requirements |
Device.Graphics.AdapterRender.MinimumDirectXLevel |
Platforms |
Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2 |
Expected run time |
~8 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Graphic Adapter or Chipset Testing Prerequisites.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Graphics Testing.
More information
This test includes the following test cases:
CONF:Create. Create a shared resource.
CONF:Open. Create and open a shared resource in the same process.
CONF:ClientOpen. Create a shared resource in Process 1, and open that resource in Process 2.
CONF:Verify. Process 2 verifies that the content of the opened resource is correct.
CONF:Fill. Process 2 fills the open resource, and Process 1 verifies the content.
CONF:Lock. This test case initiates the following actions:
Process 1 locks the resource,
Process 2 attempts to lock the resource (this attempt should fail)
Process 2 attempts to unlock the resource (this attempt should fail)
Process 1 unlocks the resource
Process 2 attempts to lock the resource (this attempt should fail)
Process 2 attempts to unlock the resource (this attempt should fail)
Process 1 attempts to unlock the resource again (this attempt should fail)
CONF:ReleaseSourceUseOpen. This test case completes the following actions:
Process 1 creates a resource
Process 2 opens the resource and verifies the content of the resource
Process 1 releases the resource
Process 2 uses the resource
Process 1 opens the resource and then updates the resource content.
You can test multiple resource types, or just one by using the command line. To run with only one resource type, use -ResourceType:<ResourceType>.
You can use the following resource types:
OFFSCREENPLAIN
DEPTHSTENCIL
RENDERTARGET
TEXTURE
VOLUMETEXTURE
VOLUMETEXTURE
INDEXBUFFER
Command syntax
| Command option | Description |
|---|---|
D3DCrossProcShare -CrossProcShare_Conf -M:1 -whql -logclean |
This command runs the D3D Cross Proc Sharing test job. |
D3DCrossProcShare -CrossProcShare_Conf -M:1 -whql -logclean |
This command runs the D3D Cross Proc Sharing (WoW64) test job. |
Note
For command line help for this test binary, type /?.
File list
| File | Location |
|---|---|
Configdisplay.exe |
<[testbinroot]>\nttest\windowstest\tools |
D3d10ref.dll |
<[testbinroot]>\nttest\graphics\d3d\support\ |
D3d11ref.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
D3dcompiler_test.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
D3DCrossProcShare.exe |
<[testbinroot]>\nttest\windowstest\graphics\d3d\conf\ |
D3dref.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support |
D3dref8.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
D3dref9.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
D3dx10_test.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
D3dx11_TEST.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
D3dx8d.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
D3dx9_TEST.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
Fpstate.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\utility\ |
Modechange.exe |
<[testbinroot]>\nttest\windowstest\graphics\d3d\utility\ |
TDRWatch.exe |
<[testbinroot]>\nttest\windowstest\graphics\ |
Vbswap.x |
<[testbinroot]>\nttest\windowstest\graphics\d3d\conf\ |