iSCSI HBA Oneway CHAP Test (LOGO)
This test verifies that the iSCSI initiator can use the Challenge Handshake Authentication Protocol (CHAP) authentication mechanism. The test verifies a one-way CHAP.
Test details
Associated requirements |
Device.Storage.Controller.Iscsi.Interface |
Platforms |
Windows 7 (x64) Windows 7 (x86) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows Server 2008 x64 Windows Server 2008 x86Windows 8.1 x64Windows 8.1 x86Windows Server 2012 R2 |
Expected run time |
~5 minutes |
Categories |
Certification Functional |
Type |
Manual |
Running the test
Before you run the test, complete the test setup as described in the test requirements: iSCSI HBA Testing Prerequisites.
In addition, this test requires the following software and hardware:
- 1 GB network adapter
If this is the first time you are running an iSCSI HBA test, iSCSI Target test, or MPIO test over iSCSI bus type on the HCK client, or if there is no iscsihctconfig.ini under [HCK Path]\JobsWorkingDir\ on the HCK client, you will receive a pop-up dialog box to input iSCSI configuration information and/or HBA information. For more information about this dialog box, see “Running the test” in iSCSI HBA Boot Test (LOGO).
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Storage Testing.
In addition:
Look at the job results log file for test failures
Enter the required data in the configuration dialog box that appears when this job is scheduled. For more information, go to iSCSI HBA Boot Test (LOGO).
More information
This test implements a simple test target and does not require a separate iSCSI target device. The test initiates a login to the test target specifying a one-way CHAP. The target verifies that the initiator follows the CHAP specifics that are detailed in the iSCSI specification. Different test variations will use different encodings (Base16 or Base64) for CHAP challenges. In addition, the test verifies that the HBA handles an authentication error correctly and returns the appropriate status to the user.
To run this test:
Run the test as a DTM job.
Fill the required data in the configuration UI that pops up when this job is scheduled.
Parameters
| Parameter | Description |
|---|---|
LogVerbosity |
The verbosity of logging. There are three levels of output: 0, 1, and 2. 2 is the most verbose. Default value: 1 |
Command syntax
| Command | Description |
|---|---|
iscsi_initchap.exe -oneway -hct -v [LogVerbosity] |
Runs the test. The –v option controls the verbosity of the logging. There are three levels of output: 0, 1, and 2. 2 is the most verbose. |
Note
For command-line help for this test binary, type /h
File list
| File | Location |
|---|---|
iscsi_initchap.exe |
<[testbinroot]>\nttest\driverstest\storage\wdk\iscsi\ |