DPC ISR Tests
This automated test validates the wireless LAN adapter’s DPC ISR's through a series of connects, disconnects, and sleep or resumes. If the total number of interruptions exceeds the maximum allowed, the test will fail. The total number of interruptions is calculated by multiplying the trace length (in seconds) by 3 and then adding the number of packets received. The test will also fail if 0 interrupts are received.
Test details
Associated requirements |
Device.Network.WLAN.Base.MinimizeCPUUtilization Device.Network.WLAN.CSBBase.MinimizeCPUUtilization |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~15 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.
More information
Command syntax
| Parameter | Description |
|---|---|
AP1Password |
The root password for the first physical access point. |
AP1IPAddress |
The IP address of the WAN port of the first physical access point. |
AP2Password |
The root password for the second physical access point. |
AP2IPAddress |
The root password for the second physical access point. |
SDIO_Physical_Address |
The SDIO physical address of the adapter. This value is obtained from the device manufacturer. This value should be blank on PCIE. |