WGF11 Render Targets
This automated test verifies D3D graphics driver/hardware conformance for render target features and RenderTargetViews. It also verifies driver support for render target clearing and swap chains.
This topic applies to the following test jobs:
WGF11 Render Targets
WGF11 Render Targets (WoW64)
Test details
Associated requirements |
Device.Graphics.AdapterRender.D3D101Core.D3D101CorePrimary Device.Graphics.AdapterRender.D3D10Core.D3D10CorePrimary Device.Graphics.AdapterRender.D3D111Core.D3D111CorePrimary Device.Graphics.AdapterRender.D3D11Core.D3D11CorePrimary |
Platforms |
Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2 |
Expected run time |
~2 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Graphic Adapter or Chipset Testing Prerequisites.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Graphics Testing.
All test cases return PASS or FAIL. To review test details, review the test log from the DTM Studio for specific details about failures. The test might return SKIP if a format is not supported by the device, or if the device does not support backbuffer casting for a particular format (in the SwapChain test group). The test might return BLOCKED if there is an uncaught exception (framework catches it at the end and logs it).
More information
RenderTargets (tests mainly RenderTargetViews)
Rather than rendering to the backbuffer that is presented on the screen, you can draw to a render target resource. This is typically used in environment mapping techniques or in techniques where multiple passes are involved where the render target texture is used as input in another pass.
Tests cycles through all formats capable of being used as a render target. No conversion takes place, but results must be within 1-ULP (Unit Least Precision) of expected result (per component).
Three types of source data are used: tiles, gradients, and stripes. Each data type is parameterized, such as gradient colors, tile and stripe size, and so on.
Depending on the resource type (all five types are tested), the test cycles through different values for height, width, and depth. This includes non-square and non-pow-2 values.
MRT (Multiple Render Targets) are tested, and multiple mip-levels and array slices are targeted.
Hits all render target slots throughout the test run.
Renders to VB, IB, and shader resource (verify in subsequent Draw() call).
Renders to texture cube (and sub mips) by creating a Texture2DArray render target view.
Clear
Tests clearing of the bound render target view through the ClearRenderTargetView D3D API. This includes testing of the various resource types (1D, 2D, and so on), and using special floating point values as the clear value (INF, NaN, and so on).
SwapChain
Tests rendering to the backbuffer and presenting using various swap chain creation parameters, including format. Also tests back buffer casting, which is new to D3D11. This allows creating a render target view of a format that is not in the same typeless family as the resource's format.
Command syntax
| Command option | Description |
|---|---|
Wgf11rendertargets |
Rusn the terst jobs. Without any options, the test enumerates devices. |
-FeatureLevel:XX.X |
Sets the feature level, where XX.X is the Feature Level the test will run at: 10.0, 10.1, or 11.0. |
Note
For command line help for this test binary, type /?.
File list
| File | Location |
|---|---|
Configdisplay.exe |
<[testbinroot]>\nttest\windowstest\tools\ |
D3d11_1sdklayers.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
D3d11ref.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
D3d11sdklayers.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
D3dcompiler_test.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support |
D3dx10_test.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
d3dx11_test.dll |
<[testbinroot]>\nttest\windowstest\graphics\d3d\support\ |
TDRWatch.exe |
<[testbinroot]>\nttest\windowstest\graphics\ |
wgf11rendertargets.exe |
<[testbinroot]>\nttest\windowstest\graphics\d3d\conf |