DMR content playback without user input (INPUT-01 INPUT-05)
This test verifies that a DMR advertises its presence on the network (INPUT-01) and is capable of accepting actions without user input (INPUT-05).
INPUT-01 (Applies to A/V DMR and Audio DMR)
A Digital Media Renderer must advertise its presence on the network by using ssdp:alive messages after the device has been turned on and once the user has completed any required network configuration options.
INPUT-05 (Applies to A/V DMR and Audio DMR)
If a Digital Media Renderer advertises its presence on the network by using ssdp:alive messages, it must be capable of accepting actions, including SetAVTransportURI() and Play() from a Digital Media Controller without requesting any additional user input. The only exception for this requirement is if the user is performing interactive operations with the device, such as configuring the device or playing games. Only in these cases, the device may respond with error codes that indicate that the device is busy.
Test details
Associated requirements |
Device.Media.DMR.Base.ContentPlaybackWithoutUserInput |
Platforms |
Windows 7 (x64) Windows 7 (x86) Windows 8 (x64) Windows 8 (x86) Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~10 minutes |
Categories |
Experiences |
Type |
Manual |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Digital Media Renderer Testing Prerequisites.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Media Testing.
More information
Parameters
| Parameter | Description |
|---|---|
WDKData_DeviceUUID |
The Device ID |
Command syntax
| Command | Description |
|---|---|
NetMediaLogoTests.exe NETMEDIA_0042 /dmrID=[Query WDKData_DeviceUUID] |
Runs the test. |
File list
| File | Location |
|---|---|
NetMediaLogoTests.exe |
<testbinroot>\nttest\multimediatest\sharing\netmedialogotests |