Device Bezel Integration
Test name
Test.DeviceBezel.json
Core requirements tested
Device.Digitizer.PrecisionTouchPad.Hardware.Bezel
Test purpose
Verifies that the device is integrated correctly.
Tools required
PTLogo.exe
Depth gauge or micrometer (or pre-fabricated 1.5mm thick material)
Validation steps
Start Test.DeviceBezel.json.
If the digitizer surface is above or more than 1.5mm below the edge of the bezel area surrounding it, manually fail the iteration; otherwise, manually pass the iteration.
To test height, place the corner of a 1.5mm thick sheet on top of the touchpad. If the touchpad and the sheet are still lower than the bezel, the separation is too great and this test should be marked as a failure.
Common errors
None
Passing
1/1 (100%) iterations must pass in order to complete with passing status.
Related topics