Wlan L1 Test 09 - Attempt a connection to a non-existent network

This automated test creates a wireless profile for a network that does not exist and tries to connect to the non-existent network.

Test details

Associated requirements	Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq See the device hardware requirements.
Platforms	Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86
Expected run time	~2 minutes
Categories	Basic Certification
Type	Automated

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test will do the following:

Create a wireless profile for a network that does not exist.
Instruct the wireless service to connect to the created profile The device/driver is expected to quickly fail since the network is not visible.
If the connection start event is not seen within ten seconds, the test will fail.
If the associating message is not seen within eight seconds of connection start, the test will fail.
If the connection failure message is not seen within eight seconds of associating, the test will fail.