WLAN Wake - NLO Discovery - Functional
This automated validates the wake by NLO discovery functionality. The device should enter the D2 state after pressing the power button for two minutes. The device should wake by NLO discovery during the D2 state.
Test details
Associated requirements |
Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBNLO.SupportNetworkListOffload Device.Network.WLAN.NLO.SupportNetworkListOffload |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~12 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.
More information
Command syntax
| Parameter | Description |
|---|---|
TestDeviceSupports5ghz |
Determines whether or not the device supports 5 GHz. Default value: True |
AP1Password |
The root password for the first physical access point. Default value: password |
AP1IPAddress |
The IP address of the WAN port of the first physical access point. Default value: 192.168.2.2 |
AP2Password |
The root password for the second physical access point. Default value: password |
AP2IPAddress |
The root password for the second physical access point. Default value: 192.168.2.3 |