Delen via

NDISTest 6.5 - WLanAuthentication

  • Artikel

This automated test completes an 802.11 conformance test for testing authentication with either emulated or extensible wireless drivers and verifies the connection and data transmission with different authentication and cipher combinations supported on the network adapter with SoftAP.

Test details

Associated requirements

Device.Network.WLAN.Base.ConformToNDIS Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.Base.OnlyWDFOrNDIS630Calls Device.Network.WLAN.Base.SupportVirtualWiFi Device.Network.WLAN.CSBBase.ConformToNDIS Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBBase.OnlyWDFOrNDIS630Calls Device.Network.WLAN.CSBBase.SupportFiltering32MulticastAddresses Device.Network.WLAN.CSBBase.SupportVirtualWiFi Device.Network.WLAN.CSBSoftAP.SupportSoftAP Device.Network.WLAN.SoftAP.SupportSoftAP

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~11 minutes

Categories

Certification Functional

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

The following suites are available in this test:

  • Authentication_cmn

  • Association_ext

The Authentication_cmn suite consists of the following:

Name Description

Pre-configuration

  • Start testsoft access point

  • Query supported authentication and cipher types

  • Ignore open none

  • Start access point comm helper

  • Start DUT comm helper

VerifyRoamFailIfAuthMismatch

Verify the DUT does not roam to a new access point with a different authentication algorithm. You must have two access points with the same SSID but configured with different authentication type. Connect to the first access point and then turn off the access point.

VerifyMismatchPresharedKey

Verify the DUT does not successfully connect to an access point with mismatched shared keys.

VerifyMismatchAuthMode

Verify a DUT does not successfully connect to an access point with mismatched authentication or cipher.

VerifyAuthenticationForAdhoc

Verify the DUT successfully connects to an IBSS using {0} authentication and {1} cipher. This is done for all authentication/ciphers supported in IBSS mode. It does not apply to devices that support InstantGo.

 

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

 

 

Send comments about this topic to Microsoft