Wlan L1 Test 04 - Check for mandatory Connected Standby Oids
This automated test queries the driver on a machine that supports InstantGo for implemented OIDs.
Test details
Associated requirements |
Device.Network.WLAN.Base.ConformToNDIS Device.Network.WLAN.CSBBase.ConformToNDIS |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~1 minutes |
Categories |
Basic Certification |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
This test does the following:
Check for the following OIDs. These OIDs are documented on MSDN under Auto PSM and NLO (https://msdn.microsoft.com/library/windows/hardware/ff560689(v=vs.85).aspx).
OID_DOT11_POWER_MGMT_MODE_AUTO_ENABLED
OID_DOT11_POWER_MGMT_MODE_STATUS
OID_DOT11_OFFLOAD_NETWORK_LIST
The test will fail if any of the mandatory OIDs are not returned to NDIS as a part of miniport initialization.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.