WLAN Data Path Tests - Functional
This automated performs stress tests on WLAN scan, connect and disconnect, radio off and on, roaming, and sleep.
Test details
Associated requirements |
Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBNLO.SupportNetworkListOffload Device.Network.WLAN.NLO.SupportNetworkListOffload |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~10 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
The access point is configured with a random SSID using WPA2PSK/AES.
The following test cases are available in this test:
| Name | Description |
|---|---|
UDP |
The SUT listens for UDP traffic while the DUT sends UDP traffic. The test passes if UDP traffic is received by the SUT. |
TCP |
The SUT waits for a TCP connection. The DUT connects to the TCP session and sends data. The test passes if the data was received. |
Multicast |
The SUT sends multicast data while the DUT receives it. The test passes if multicast data was properly received. |
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.
More information
Command syntax
| Parameter | Description |
|---|---|
TestDeviceSupports5ghz |
Determines whether or not the device supports 5 GHz. Default value: True |
AP1Password |
The root password for the first physical access point. Default value: password |
AP1IPAddress |
The IP address of the WAN port of the first physical access point. Default value: 192.168.2.2 |
AP2Password |
The root password for the second physical access point. Default value: password |
AP2IPAddress |
The root password for the second physical access point. Default value: 192.168.2.3 |