Strong Name Tool (Sn.exe)
The Strong Name tool (Sn.exe) helps sign assemblies with strong names. Sn.exe provides options for key management, signature generation, and signature verification.
sn [-quiet][option [parameter(s)]]
Parameters
Option |
Description |
|---|---|
-c [csp] |
Sets the default cryptographic service provider (CSP) to use for strong name signing. This setting applies to the entire computer. If you do not specify a CSP name, Sn.exe clears the current setting. |
-d container |
Deletes the specified key container from the strong name CSP. |
-D assembly1 assembly2 |
Verifies that two assemblies differ only by signature. This is often used as a check after an assembly has been re-signed with a different key pair. |
-e assembly outfile |
Extracts the public key from assembly and stores it in outfile. |
-h |
Displays command syntax and options for the tool. |
-i infile container |
Installs the key pair from infile in the specified key container. The key container resides in the strong name CSP. |
-k [keysize] outfile |
Generates a new RSACryptoServiceProvider key of the specified size and writes it to the specified file. Both a public and private key are written to the file. If you do not specify a key size, a 1,024-bit key is generated by default if you have the Microsoft enhanced cryptographic provider installed; otherwise, a 512-bit key is generated. The keysize parameter supports key lengths from 384 bits to 16,384 bits in increments of 8 bits if you have the Microsoft enhanced cryptographic provider installed. It supports key lengths from 384 bits to 512 bits in increments of 8 bits if you have the Microsoft base cryptographic provider installed. |
-m [y|n] |
Specifies whether key containers are computer-specific, or user-specific. If you specify y, key containers are computer-specific. If you specify n, key containers are user-specific. If neither y nor n is specified, this option displays the current setting. |
-o infile [outfile] |
Extracts the public key from the infile and stores it in a .csv file. A comma separates each byte of the public key. This format is useful for hard-coding references to keys as initialized arrays in source code. If you do not specify an outfile, this option places the output on the Clipboard. Note This option does not verify that the input is only a public key. If the infile contains a key pair with a private key, the private key is also extracted. |
-p infile outfile |
Extracts the public key from the key pair in infile and stores it in outfile. This public key can be used to delay-sign an assembly using the /delaysign+ and /keyfile options of the Assembly Linker (Al.exe). When an assembly is delay-signed, only the public key is set at compile time and space is reserved in the file for the signature to be added later, when the private key is known. |
-pc container outfile |
Extracts the public key from the key pair in container and stores it in outfile. |
-Pb [y|n] |
Specifies whether the strong-name bypass policy is enforced. If you specify y, strong names for full-trust assemblies are not validated when loaded into a full-trust AppDomain. If you specify n, strong names are validated for correctness, but not for a specific strong name. The StrongNameIdentityPermission has no effect on full-trust assemblies. You must perform your own check for a strong name match. If neither y nor n is specified, this option displays the current setting. The default is y. Note On 64-bit computers, you must set this parameter in both the 32-bit and the 64-bit instances of Sn.exe. |
-q[uiet] |
Specifies quiet mode; suppresses the display of success messages. |
-R[a] assembly infile |
Re-signs a previously signed or delay-signed assembly with the key pair in infile. If -Ra is used, hashes are recomputed for all files in the assembly. |
-Rc[a] assembly container |
Re-signs a previously signed or delay-signed assembly with the key pair in container. If -Rca is used, hashes are recomputed for all files in the assembly. |
-Rh assembly |
Recomputes hashes for all files in the assembly. |
-t[p] infile |
Displays the token for the public key stored in infile. The contents of infile must be a public key previously generated from a key pair file using -p. Do not use the -t[p] option to extract the token directly from a key pair file. Sn.exe computes the token by using a hash function from the public key. To save space, the common language runtime stores public key tokens in the manifest as part of a reference to another assembly when it records a dependency to an assembly that has a strong name. The -tp option displays the public key in addition to the token. Note that this option does not verify the assembly signature and should not be used to make trust decisions. This option only displays the raw public key token data. |
-T[p] assembly |
Displays the public key token for assembly. The assembly must be the name of a file that contains an assembly manifest. Sn.exe computes the token by using a hash function from the public key. To save space, the runtime stores public key tokens in the manifest as part of a reference to another assembly when it records a dependency to an assembly that has a strong name. The -Tp option displays the public key in addition to the token. Note that this option does not verify the assembly signature and should not be used to make trust decisions. This option only displays the raw public key token data. |
-TSassembly infile |
Test-signs the signed or partially signed assembly with the key pair in infile. |
-TSc assembly container |
Test-signs the signed or partially signed assembly with the key pair in the key container container. |
-v assembly |
Verifies the strong name in assembly, where assembly is the name of a file that contains an assembly manifest. |
-vf assembly |
Verifies the strong name in assembly. Unlike the -v option, -vf forces verification even if it is disabled using the -Vr option. |
-Vl |
Lists current settings for strong-name verification on this computer. |
-Vr assembly [userlist] [infile] |
Registers assembly for verification skipping. Optionally, you can specify a comma-separated list of user names. If you specify infile, verification remains enabled, but the public key in infile is used in verification operations. Assembly can be specified in the form *, strongname to register all assemblies with the specified strong name. Strongname should be specified as the string of hexadecimal digits representing the tokenized form of the public key. See the -t and -T options to display the public key token. Warning Use this option only during development. Adding an assembly to the skip verification list creates a security vulnerability. A malicious assembly could use the fully specified assembly name (assembly name, version, culture, and public key token) of the assembly added to the skip verification list to fake its identity. This would allow the malicious assembly to also skip verification. |
-Vu assembly |
Unregisters assembly for verification skipping. The same rules for assembly naming that apply to -Vr apply to -Vu. |
-Vx |
Removes all verification-skipping entries. |
-? |
Displays command syntax and options for the tool. |
Note
All Sn.exe options are case-sensitive and must be typed exactly as shown to be recognized by the tool.
Remarks
The -R and –Rc options are useful with assemblies that have been delay-signed. In this scenario, only the public key has been set at compile time and signing is performed later, when the private key is known.
Note
For parameters (for example –Vr) that write to protected resources such as the registry, run Sn.exe as an administrator.
Examples
The following command creates a new, random key pair and stores it in keyPair.snk.
sn -k keyPair.snk
The following command stores the key in keyPair.snk in the container MyContainer in the strong name CSP.
sn -i keyPair.snk MyContainer
The following command extracts the public key from keyPair.snk and stores it in publicKey.snk.
sn -p keyPair.snk publicKey.snk
The following command displays the public key and the token for the public key contained in publicKey.snk.
sn -tp publicKey.snk
The following command verifies the assembly MyAsm.dll.
sn -v MyAsm.dll
The following command deletes MyContainer from the default CSP.
sn -d MyContainer