Zorg ervoor dat de geselecteerde rij in een onderliggende tabel op de juiste plaats blijft staan.

Artikel
12/18/2024

Vaak genoeg wanneer u met gegevensbinding werkt in Windows Forms, geeft u gegevens weer in een ouder/kind- of hoofd/detailweergave. Dit verwijst naar een scenario voor gegevensbinding waarbij gegevens uit dezelfde bron in twee besturingselementen worden weergegeven. Als u de selectie in één besturingselement wijzigt, worden de gegevens die in het tweede besturingselement worden weergegeven, gewijzigd. Het eerste besturingselement kan bijvoorbeeld een lijst met klanten bevatten en de tweede een lijst met orders die betrekking hebben op de geselecteerde klant in het eerste besturingselement.

Vanaf .NET Framework versie 2.0 moet u, wanneer u gegevens weergeeft in een ouder/kind weergave, mogelijk extra stappen ondernemen om ervoor te zorgen dat de geselecteerde rij in de onderliggende tabel niet wordt teruggezet naar de eerste rij van de tabel. Hiervoor moet u de positie van de onderliggende tabel in de cache opslaan en opnieuw instellen nadat de bovenliggende tabel is gewijzigd. Normaal gesproken vindt het opnieuw instellen van het kindelement plaats wanneer een veld in een rij van de bovenliggende tabel wordt gewijzigd.

De huidige kinderpositie in de cache opslaan

Declareer een integer-variabele om de positie van de kindlijst op te slaan en een Booleaanse variabele om op te slaan of de positie van het kind moet worden gecachet.
```
private int cachedPosition = -1;
private bool cacheChildPosition = true;
```
```
Private cachedPosition As Integer = - 1
Private cacheChildPosition As Boolean = True
```
De ListChanged gebeurtenis voor de CurrencyManager van de binding afhandelen en controleren op een ListChangedType van Reset.

Controleer de huidige positie van de CurrencyManager. Als deze groter is dan het eerste item in de lijst (meestal 0), slaat u deze op in een variabele.

void relatedCM_ListChanged(object sender, ListChangedEventArgs e)
{
    // Check to see if this is a caching situation.
    if (cacheChildPosition && cachePositionCheckBox.Checked)
    {
        // If so, check to see if it is a reset situation, and the current
        // position is greater than zero.
        CurrencyManager relatedCM = sender as CurrencyManager;
        if (e.ListChangedType == ListChangedType.Reset && relatedCM.Position > 0)

            // If so, cache the position of the child table.
            cachedPosition = relatedCM.Position;
    }
}

Private Sub relatedCM_ListChanged(ByVal sender As Object, _
    ByVal e As ListChangedEventArgs)
    ' Check to see if this is a caching situation.
    If cacheChildPosition AndAlso cachePositionCheckBox.Checked Then
        ' If so, check to see if it is a reset situation, and the current
        ' position is greater than zero.
        Dim relatedCM As CurrencyManager = sender
        If e.ListChangedType = ListChangedType.Reset _
            AndAlso relatedCM.Position > 0 Then

            ' If so, cache the position of the child table.
            cachedPosition = relatedCM.Position
        End If
    End If

End Sub

De CurrentChanged gebeurtenis van de bovenliggende lijst voor de bovenliggende valutabeheerder verwerken. Stel in de handler de Booleaanse waarde in om aan te geven dat het geen cachescenario is. Als de CurrentChanged optreedt, is de wijziging in het bovenliggende item een wijziging in de lijstpositie en niet een wijziging van de itemwaarde.

void bindingSource1_CurrentChanged(object sender, EventArgs e)
{
    // If the CurrentChanged event occurs, this is not a caching
    // situation.
    cacheChildPosition = false;
}

' Handle the current changed event. This event occurs when
' the current item is changed, but not when a field of the current
' item is changed.
Private Sub bindingSource1_CurrentChanged(ByVal sender As Object, _
    ByVal e As EventArgs) Handles bindingSource1.CurrentChanged
    ' If the CurrentChanged event occurs, this is not a caching 
    ' situation.
    cacheChildPosition = False

End Sub

De kindpositie opnieuw instellen

Behandel de PositionChanged gebeurtenis voor de binding van het kind CurrencyManager.

Stel de positie van de subtabel opnieuw in naar de positie die in de cache is opgeslagen in de vorige procedure.

void relatedCM_PositionChanged(object sender, EventArgs e)
{
    // Check to see if this is a caching situation.
    if (cacheChildPosition && cachePositionCheckBox.Checked)
    {
        CurrencyManager relatedCM = sender as CurrencyManager;

        // If so, check to see if the current position is
        // not equal to the cached position and the cached
        // position is not out of bounds.
        if (relatedCM.Position != cachedPosition && cachedPosition
            > 0 && cachedPosition < relatedCM.Count)
        {
            relatedCM.Position = cachedPosition;
            cachedPosition = -1;
        }
    }
}

Private Sub relatedCM_PositionChanged(ByVal sender As Object, ByVal e As EventArgs) 
    ' Check to see if this is a caching situation.
    If cacheChildPosition AndAlso cachePositionCheckBox.Checked Then
        Dim relatedCM As CurrencyManager = sender
        
        ' If so, check to see if the current position is 
        ' not equal to the cached position and the cached 
        ' position is not out of bounds.
        If relatedCM.Position <> cachedPosition AndAlso _
            cachedPosition > 0 AndAlso cachedPosition < _
            relatedCM.Count Then
            relatedCM.Position = cachedPosition
            cachedPosition = -1
        End If
    End If
End Sub

Voorbeeld

In het volgende voorbeeld ziet u hoe u de huidige positie opslaat op CurrencyManagervoor een kindtabel en de positie opnieuw instelt nadat een bewerking is voltooid in de bovenliggende tabel. Dit voorbeeld bevat twee DataGridView besturingselementen die zijn gebonden aan twee tabellen in een DataSet met behulp van een BindingSource-onderdeel. Er wordt een relatie tot stand gebracht tussen de twee tabellen en de relatie wordt toegevoegd aan de DataSet. De positie in de onderliggende tabel is aanvankelijk ingesteld op de derde rij voor demonstratiedoeleinden.

using System;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;

namespace BT2
{
    public class Form1 : Form
    {
        public Form1()
        {
            InitializeControlsAndDataSource();
        }

        // Declare the controls to be used.
        private BindingSource bindingSource1;
        private DataGridView dataGridView1;
        private Button button1;
        private DataGridView dataGridView2;
        private CheckBox cachePositionCheckBox;
        public DataSet set1;

        private void InitializeControlsAndDataSource()
        {
            // Initialize the controls and set location, size and
            // other basic properties.
            this.dataGridView1 = new DataGridView();
            this.bindingSource1 = new BindingSource();
            this.button1 = new Button();
            this.dataGridView2 = new DataGridView();
            this.cachePositionCheckBox = new System.Windows.Forms.CheckBox();
            this.dataGridView1.ColumnHeadersHeightSizeMode =
                DataGridViewColumnHeadersHeightSizeMode.AutoSize;
            this.dataGridView1.Dock = DockStyle.Top;
            this.dataGridView1.Location = new Point(0, 20);
            this.dataGridView1.Size = new Size(292, 170);
            this.button1.Location = new System.Drawing.Point(18, 175);
            this.button1.Size = new System.Drawing.Size(125, 23);

            button1.Text = "Clear Parent Field";
            this.button1.Click += new System.EventHandler(this.button1_Click);
            this.dataGridView2.ColumnHeadersHeightSizeMode =
                System.Windows.Forms.DataGridViewColumnHeadersHeightSizeMode.AutoSize;
            this.dataGridView2.Location = new System.Drawing.Point(0, 225);
            this.dataGridView2.Size = new System.Drawing.Size(309, 130);
            this.cachePositionCheckBox.AutoSize = true;
            this.cachePositionCheckBox.Checked = true;
            this.cachePositionCheckBox.Location = new System.Drawing.Point(150, 175);
            this.cachePositionCheckBox.Name = "radioButton1";
            this.cachePositionCheckBox.Size = new System.Drawing.Size(151, 17);
            this.cachePositionCheckBox.Text = "Cache and restore position";
            this.ClientSize = new System.Drawing.Size(325, 420);
            this.Controls.Add(this.dataGridView1);
            this.Controls.Add(this.cachePositionCheckBox);
            this.Controls.Add(this.dataGridView2);
            this.Controls.Add(this.button1);

            // Initialize the data.
            set1 = InitializeDataSet();

            // Set the data source to the DataSet.
            bindingSource1.DataSource = set1;

            //Set the DataMember to the Menu table.
            bindingSource1.DataMember = "Customers";

            // Add the control data bindings.
            dataGridView1.DataSource = bindingSource1;

            // Set the data source and member for the second DataGridView.
            dataGridView2.DataSource = bindingSource1;
            dataGridView2.DataMember = "custOrders";

            // Get the currency manager for the customer orders binding.
            CurrencyManager relatedCM =
                bindingSource1.GetRelatedCurrencyManager("custOrders");

            // Set the position in the child table for demonstration purposes.
            relatedCM.Position = 3;

            // Handle the current changed event. This event occurs when
            // the current item is changed, but not when a field of the current
            // item is changed.
            bindingSource1.CurrentChanged +=
                new EventHandler(bindingSource1_CurrentChanged);

            // Handle the two events for caching and resetting the position.
            relatedCM.ListChanged += new ListChangedEventHandler(relatedCM_ListChanged);
            relatedCM.PositionChanged
                += new EventHandler(relatedCM_PositionChanged);

            // Set cacheing to true in case current changed event
            // occurred on set up.
            cacheChildPosition = true;
        }

        // Establish the data set with two tables and a relationship
        // between them.
        private DataSet InitializeDataSet()
        {
            set1 = new DataSet();
            // Declare the DataSet and add a table and column.
            set1.Tables.Add("Customers");
            set1.Tables[0].Columns.Add("CustomerID");
            set1.Tables[0].Columns.Add("Customer Name");
            set1.Tables[0].Columns.Add("Contact Name");

            // Add some rows to the table.
            set1.Tables["Customers"].Rows.Add("c1", "Fabrikam, Inc.", "Ellen Adams");
            set1.Tables[0].Rows.Add("c2", "Lucerne Publishing", "Don Hall");
            set1.Tables[0].Rows.Add("c3", "Northwind Traders", "Lori Penor");
            set1.Tables[0].Rows.Add("c4", "Tailspin Toys", "Michael Patten");
            set1.Tables[0].Rows.Add("c5", "Woodgrove Bank", "Jyothi Pai");

            // Declare the DataSet and add a table and column.
            set1.Tables.Add("Orders");
            set1.Tables[1].Columns.Add("CustomerID");
            set1.Tables[1].Columns.Add("OrderNo");
            set1.Tables[1].Columns.Add("OrderDate");

            // Add some rows to the table.
            set1.Tables[1].Rows.Add("c1", "119", "10/04/2006");
            set1.Tables[1].Rows.Add("c1", "149", "10/10/2006");
            set1.Tables[1].Rows.Add("c1", "159", "10/12/2006");
            set1.Tables[1].Rows.Add("c2", "169", "10/10/2006");
            set1.Tables[1].Rows.Add("c2", "179", "10/10/2006");
            set1.Tables[1].Rows.Add("c2", "189", "10/12/2006");
            set1.Tables[1].Rows.Add("c3", "122", "10/04/2006");
            set1.Tables[1].Rows.Add("c4", "130", "10/10/2006");
            set1.Tables[1].Rows.Add("c5", "1.29", "10/14/2006");

            DataRelation dr = new DataRelation("custOrders",
                set1.Tables["Customers"].Columns["CustomerID"],
                set1.Tables["Orders"].Columns["CustomerID"]);
            set1.Relations.Add(dr);
            return set1;
        }
        private int cachedPosition = -1;
        private bool cacheChildPosition = true;

        void relatedCM_ListChanged(object sender, ListChangedEventArgs e)
        {
            // Check to see if this is a caching situation.
            if (cacheChildPosition && cachePositionCheckBox.Checked)
            {
                // If so, check to see if it is a reset situation, and the current
                // position is greater than zero.
                CurrencyManager relatedCM = sender as CurrencyManager;
                if (e.ListChangedType == ListChangedType.Reset && relatedCM.Position > 0)

                    // If so, cache the position of the child table.
                    cachedPosition = relatedCM.Position;
            }
        }
        void bindingSource1_CurrentChanged(object sender, EventArgs e)
        {
            // If the CurrentChanged event occurs, this is not a caching
            // situation.
            cacheChildPosition = false;
        }
        void relatedCM_PositionChanged(object sender, EventArgs e)
        {
            // Check to see if this is a caching situation.
            if (cacheChildPosition && cachePositionCheckBox.Checked)
            {
                CurrencyManager relatedCM = sender as CurrencyManager;

                // If so, check to see if the current position is
                // not equal to the cached position and the cached
                // position is not out of bounds.
                if (relatedCM.Position != cachedPosition && cachedPosition
                    > 0 && cachedPosition < relatedCM.Count)
                {
                    relatedCM.Position = cachedPosition;
                    cachedPosition = -1;
                }
            }
        }
        int count = 0;
        private void button1_Click(object sender, EventArgs e)
        {
            // For demo purposes--modifies a value in the first row of the
            // parent table.
            DataRow row1 = set1.Tables[0].Rows[0];
            row1[1] = DBNull.Value;
        }

        [STAThread]
        static void Main()
        {
            Application.EnableVisualStyles();
            Application.SetCompatibleTextRenderingDefault(false);
            Application.Run(new Form1());
        }
    }
}

Imports System.ComponentModel
Imports System.Data
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms



Public Class Form1
    Inherits Form
    
    Public Sub New() 
        InitializeControlsAndDataSource()
    
    End Sub
    
    ' Declare the controls to be used.
    Private WithEvents bindingSource1 As BindingSource
    Private dataGridView1 As DataGridView
    Private WithEvents button1 As Button
    Private dataGridView2 As DataGridView
    Private cachePositionCheckBox As CheckBox
    Public set1 As DataSet
    
    
    Private Sub InitializeControlsAndDataSource() 
        ' Initialize the controls and set location, size and 
        ' other basic properties.
        Me.dataGridView1 = New DataGridView()
        Me.bindingSource1 = New BindingSource()
        Me.button1 = New Button()
        Me.dataGridView2 = New DataGridView()
        Me.cachePositionCheckBox = New System.Windows.Forms.CheckBox()
        Me.dataGridView1.ColumnHeadersHeightSizeMode = _
            DataGridViewColumnHeadersHeightSizeMode.AutoSize
        Me.dataGridView1.Dock = DockStyle.Top
        Me.dataGridView1.Location = New Point(0, 20)
        Me.dataGridView1.Size = New Size(292, 170)
        Me.button1.Location = New System.Drawing.Point(18, 175)
        Me.button1.Size = New System.Drawing.Size(125, 23)
        
        button1.Text = "Clear Parent Field"

        Me.dataGridView2.ColumnHeadersHeightSizeMode = _
            System.Windows.Forms.DataGridViewColumnHeadersHeightSizeMode.AutoSize
        Me.dataGridView2.Location = New System.Drawing.Point(0, 225)
        Me.dataGridView2.Size = New System.Drawing.Size(309, 130)
        Me.cachePositionCheckBox.AutoSize = True
        Me.cachePositionCheckBox.Checked = True
        Me.cachePositionCheckBox.Location = New System.Drawing.Point(150, 175)
        Me.cachePositionCheckBox.Name = "radioButton1"
        Me.cachePositionCheckBox.Size = New System.Drawing.Size(151, 17)
        Me.cachePositionCheckBox.Text = "Cache and restore position"
        Me.ClientSize = New System.Drawing.Size(325, 420)
        Me.Controls.Add(Me.dataGridView1)
        Me.Controls.Add(Me.cachePositionCheckBox)
        Me.Controls.Add(Me.dataGridView2)
        Me.Controls.Add(Me.button1)
        
        ' Initialize the data.
        set1 = InitializeDataSet()
        
        ' Set the data source to the DataSet.
        bindingSource1.DataSource = set1
        
        'Set the DataMember to the Menu table.
        bindingSource1.DataMember = "Customers"
        
        ' Add the control data bindings.
        dataGridView1.DataSource = bindingSource1
        
        ' Set the data source and member for the second DataGridView.
        dataGridView2.DataSource = bindingSource1
        dataGridView2.DataMember = "custOrders"
        
        ' Get the currency manager for the customer orders binding.
        Dim relatedCM As CurrencyManager = _
            bindingSource1.GetRelatedCurrencyManager("custOrders")

        ' Handle the two events for caching and resetting the position.
        AddHandler relatedCM.ListChanged, AddressOf relatedCM_ListChanged
        AddHandler relatedCM.PositionChanged, AddressOf relatedCM_PositionChanged
        
        ' Set the position in the child table for demonstration purposes.
        relatedCM.Position = 3

        ' Set cacheing to true in case current changed event
        ' occurred on set up.
        cacheChildPosition = True
      
    
    End Sub
    
    
    
    ' Establish the data set with two tables and a relationship
    ' between them.
    Private Function InitializeDataSet() As DataSet 
        set1 = New DataSet()
        ' Declare the DataSet and add a table and column.
        set1.Tables.Add("Customers")
        set1.Tables(0).Columns.Add("CustomerID")
        set1.Tables(0).Columns.Add("Customer Name")
        set1.Tables(0).Columns.Add("Contact Name")
        
        ' Add some rows to the table.
        set1.Tables("Customers").Rows.Add("c1", "Fabrikam, Inc.", _
            "Ellen Adams")
        set1.Tables(0).Rows.Add("c2", "Lucerne Publishing", "Don Hall")
        set1.Tables(0).Rows.Add("c3", "Northwind Traders", "Lori Penor")
        set1.Tables(0).Rows.Add("c4", "Tailspin Toys", "Michael Patten")
        set1.Tables(0).Rows.Add("c5", "Woodgrove Bank", "Jyothi Pai")
        
        ' Declare the DataSet and add a table and column.
        set1.Tables.Add("Orders")
        set1.Tables(1).Columns.Add("CustomerID")
        set1.Tables(1).Columns.Add("OrderNo")
        set1.Tables(1).Columns.Add("OrderDate")
        
        ' Add some rows to the table.
        set1.Tables(1).Rows.Add("c1", "119", "10/04/2006")
        set1.Tables(1).Rows.Add("c1", "149", "10/10/2006")
        set1.Tables(1).Rows.Add("c1", "159", "10/12/2006")
        set1.Tables(1).Rows.Add("c2", "169", "10/10/2006")
        set1.Tables(1).Rows.Add("c2", "179", "10/10/2006")
        set1.Tables(1).Rows.Add("c2", "189", "10/12/2006")
        set1.Tables(1).Rows.Add("c3", "122", "10/04/2006")
        set1.Tables(1).Rows.Add("c4", "130", "10/10/2006")
        set1.Tables(1).Rows.Add("c5", "1.29", "10/14/2006")
        
        Dim dr As New DataRelation("custOrders", _
            set1.Tables("Customers").Columns("CustomerID"), _
            set1.Tables("Orders").Columns("CustomerID"))
        set1.Relations.Add(dr)
        Return set1
    
    End Function '
    Private cachedPosition As Integer = - 1
    Private cacheChildPosition As Boolean = True
    
    Private Sub relatedCM_ListChanged(ByVal sender As Object, _
        ByVal e As ListChangedEventArgs)
        ' Check to see if this is a caching situation.
        If cacheChildPosition AndAlso cachePositionCheckBox.Checked Then
            ' If so, check to see if it is a reset situation, and the current
            ' position is greater than zero.
            Dim relatedCM As CurrencyManager = sender
            If e.ListChangedType = ListChangedType.Reset _
                AndAlso relatedCM.Position > 0 Then

                ' If so, cache the position of the child table.
                cachedPosition = relatedCM.Position
            End If
        End If

    End Sub

    ' Handle the current changed event. This event occurs when
    ' the current item is changed, but not when a field of the current
    ' item is changed.
    Private Sub bindingSource1_CurrentChanged(ByVal sender As Object, _
        ByVal e As EventArgs) Handles bindingSource1.CurrentChanged
        ' If the CurrentChanged event occurs, this is not a caching 
        ' situation.
        cacheChildPosition = False

    End Sub

    Private Sub relatedCM_PositionChanged(ByVal sender As Object, ByVal e As EventArgs) 
        ' Check to see if this is a caching situation.
        If cacheChildPosition AndAlso cachePositionCheckBox.Checked Then
            Dim relatedCM As CurrencyManager = sender
            
            ' If so, check to see if the current position is 
            ' not equal to the cached position and the cached 
            ' position is not out of bounds.
            If relatedCM.Position <> cachedPosition AndAlso _
                cachedPosition > 0 AndAlso cachedPosition < _
                relatedCM.Count Then
                relatedCM.Position = cachedPosition
                cachedPosition = -1
            End If
        End If
    End Sub

    Private count As Integer = 0
    
    Private Sub button1_Click(ByVal sender As Object, _
        ByVal e As EventArgs) Handles button1.Click
        ' For demo purposes--modifies a value in the first row of the
        ' parent table.
        Dim row1 As DataRow = set1.Tables(0).Rows(0)
        row1(1) = DBNull.Value
    End Sub
     
    <STAThread()>  _
    Shared Sub Main() 
        Application.EnableVisualStyles()
        Application.SetCompatibleTextRenderingDefault(False)
        Application.Run(New Form1())
    
    End Sub
End Class

Voer de volgende stappen uit om het codevoorbeeld te testen:

Voer het voorbeeld uit.
Zorg ervoor dat het selectievakje "Cache en de positie opnieuw instellen" is ingeschakeld.
Klik op de knop Ouder veld wissen om een wijziging in een veld van de bovenliggende tabel aan te brengen. U ziet dat de geselecteerde rij in de onderliggende tabel niet wordt gewijzigd.
Sluit het voorbeeld en voer het opnieuw uit. U moet dit doen omdat het resetgedrag alleen optreedt bij de eerste wijziging in de ouderrij.
Schakel het selectievakje Cache en resetpositie uit.
Klik op de knop Bovenliggend veld verwijderen. U ziet dat de geselecteerde rij in de onderliggende tabel verandert in de eerste rij.

De code compileren

Voor dit voorbeeld is het volgende vereist:

Verwijzingen naar de assemblages System, System.Data, System.Drawing, System.Windows.Forms en System.XML.

Delen via

Zorg ervoor dat de geselecteerde rij in een onderliggende tabel op de juiste plaats blijft staan.

De huidige kinderpositie in de cache opslaan

De kindpositie opnieuw instellen

Voorbeeld

De code compileren

Zie ook

Aanvullende resources