UNIX/Lux 모니터링에서 승격을 위한 Sudoers 템플릿
UNIX 또는 Linux 운영 체제를 효과적으로 모니터링하려면 모니터링 및 유지 관리 작업 모두에 대해 클라이언트 시스템에 대한 일부 상승된 권한이 필요합니다. 기준 조작성을 위해 이 문서에 제공된 sudoers 구성 템플릿이 있습니다.
소개
Operations Manager를 사용하여 모니터링하기 위해 sudo 사용 계정을 사용하려면 sudo를 사용하여 RunAs 계정에 대한 권한 상승 권한을 부여하기 위한 구성을 마련해야 합니다. Sudo 권한 상승과 함께 Operations Manager에서 사용하는 계정에 대한 일반적인 요구 사항은 다음과 같습니다.
- 계정에 기본 매개 변수로 RequireTTY를 사용하지 않도록 설정해야 합니다.
- NOPASSWD를 사용하여 상승하도록 계정을 구성해야 합니다.
- 계정에는 일반적으로 로그인할 때와 sudo를 사용하여 승격할 때 표시되는 "강의"가 있어야 합니다.
제공된 템플릿은 구성된 RunAs 계정이 다음과 같은 상승된 권한이 필요한 작업을 실행할 수 있도록 하는 명령을 지정합니다.
- 에이전트 설치
- 에이전트 업그레이드
- 에이전트 제거
- 시스템 로그 모니터링
- 에이전트 서비스 다시 시작
- 인증 인증서 생성 촉진
참고 항목
명령 및 요구 사항은 모든 UNIX/Linux 배포판 또는 버전에서 동일하지 않으므로 운영 체제에 맞는 템플릿이 있는지 확인합니다.
OS가 표시되지 않나요? 지원되는 배포판은 지원되는 UNIX 및 Linux 운영 체제 버전 페이지를 참조하세요.
템플릿 사용
운영 체제에 적합한 템플릿을 선택하고 예제 계정을 RunAs 계정 사용자 이름으로 바꿉니다. 필요한 경우 다른 조직 사용자 지정이 포함됩니다.
각 템플릿에는 두 개의 계정이 정의되어 있으며 다음과 같이 표준 RunAs 계정에 매핑됩니다.
| 실행 계정 | 사용자 이름 |
|---|---|
| UNIX/Linux 작업 계정 | scomuser |
| UNIX/Linux 유지 관리 계정 | scomadm |
올바른 사용자 이름 및 추가 수정 사항으로 업데이트되면 템플릿을 클라이언트 시스템의 sudoers 구성에 추가해야 합니다. 일반적으로 OS에 따라 직접 또는 파일을 수정 /etc/sudoers 하거나 /etc/sudo.conf (예: ) 아래에 /etc/sudoers.d "드롭 인" 파일을 추가하여 sudo 구성을 추가하는 두 가지 방법이 있습니다 /etc/sudoers.d/scom. 이 문서에서는 sudo 자체를 완전히 구성하는 방법에 대해 자세히 설명하지 않습니다. 자세한 내용은 공급업체에서 특정 운영 체제에 대해 제공한 설명서를 참조하세요.
AIX
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[[\:digit\:]].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /usr/bin/ksh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager
#-----------------------------------------------------------------------------------
AIX 7.2
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[0-9].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[0-9].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[0-9].ppc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[0-9].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[0-9].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[0-9].ppc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[[\:digit\:]].ppc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].aix.[[\:digit\:]].ppc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].aix.[[\:digit\:]].ppc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
## End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
HP-UX
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].hpux.11iv3.ia64.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].hpux.11iv3.ia64.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].hpux.11iv3.ia64.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].hpux.11iv3.ia64.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].hpux.11iv3.ia64.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].hpux.11iv3.ia64.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
Red Hat Enterprise Linux(RHEL)
Important
버전 8부터 Red Hat Enterprise Linux는 유니버설 Linux에 속합니다.
RHEL 6
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
RHEL 7
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2022
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
POWER 8의 RHEL 7.1
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
POWER 8의 RHEL 7.1
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].ppc.sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].rhel.[[\:digit\:]].ppc.sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
Solaris
#-----------------------------------------------------------------------------------
#Example user configuration for Operations Manager 2019
#Example assumes users named: scomadm & scomuser
#Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
#General requirements
Defaults:scomadm !requiretty
#Agent maintenance
##Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
##Install or upgrade
#SOLARIS 10
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
#SOLARIS 11
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].sparc.sh --install --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --enable-opsmgr ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
##Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
##Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
###Examples
#Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
#Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
#End user configuration for Operations Manager agent
#-------------------------------------------------------------------------------------
Solaris 10
#-----------------------------------------------------------------------------------
#Example user configuration for Operations Manager 2016
#Example assumes users named: scomadm & scomuser
#Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
#General requirements
Defaults:scomadm !requiretty
#Agent maintenance
##Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
##Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.sparc.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.sparc.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.sparc.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.sparc.sh --upgrade --force
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.sparc.sh --upgrade --force
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.sparc.sh --upgrade --force
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.x86.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.x86.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.x86.sh --install
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.10.x86.sh --upgrade --force
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.10.x86.sh --upgrade --force
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.10.x86.sh --upgrade --force
##Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
##Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
###Examples
#Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
#Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
#End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
Solaris 11
#-----------------------------------------------------------------------------------
#Example user configuration for Operations Manager 2016
#Example assumes users named: scomadm & scomuser
#Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
#General requirements
Defaults:scomadm !requiretty
#Agent maintenance
##Certificate signing
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
##Install or upgrade
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].x86.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].x86.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].x86.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].x86.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].x86.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].x86.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].sparc.sh --install ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].solaris.1[[\:digit\:]].sparc.sh --upgrade --force ; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
##Uninstall
scomadm ALL=(root) NOPASSWD: /usr/bin/sh -c /opt/microsoft/scx/bin/uninstall
##Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
###Examples
#Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
#Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /usr/bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
#End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
SLES(SUSE Linux Enterprise Server)
Important
버전 15부터 SUSE는 유니버설 Linux에 속합니다.
SLES 12
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2022
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
PowerPC(SLES on PowerPC)
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].ppc.sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].ppc.sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9][0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].sles.1[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
Universal Linux
유니버설 Linux는 Debian 및 Red Hat 기반 운영 체제를 모두 포함하며 지원되는 최신 Linux 운영 체제 및 배포를 찾을 수 있는 곳입니다. 이 클래스 형식에 속하는 배포판 목록은 지원되는 UNIX 및 Linux 운영 체제 버전을 참조하세요.
#----------------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2022
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## For ubuntu18
#scomuser ALL=(root) NOPASSWD: /bin/bash -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager
#-----------------------------------------------------------------------------------
#----------------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2019
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/service_control; then cp /tmp/scx-scomadm/omsadmin.conf /etc/opt/microsoft/omsagent/scom/conf/omsadmin.conf; /opt/microsoft/omsagent/bin/service_control restart scom; fi
## Install or upgrade
# Compiler mitigated agent version changes
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].s.x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].s.x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --enable-opsmgr; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
#scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c if test -f /opt/microsoft/omsagent/bin/omsadmin.sh; then if test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | grep scom | wc -l)" \= "1" && test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l | wc -l)" \= "1" || test "$(/opt/microsoft/omsagent/bin/omsadmin.sh -l)" \= "No Workspace"; then /opt/microsoft/omsagent/bin/uninstall; else /opt/microsoft/omsagent/bin/omsadmin.sh -x scom; fi; else /opt/microsoft/scx/bin/uninstall; fi
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
#scomuser ALL=(root) NOPASSWD: /bin/sh -c echo error
## For ubuntu18
#scomuser ALL=(root) NOPASSWD: /bin/bash -c echo error
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
## End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
# Example user configuration for Operations Manager 2016
# Example assumes users named: scomadm & scomuser
# Replace usernames & corresponding /tmp/scx-\<username\> specification for your environment
# General requirements
Defaults:scomadm !requiretty
# Agent maintenance
## Certificate signing
scomadm ALL=(root) NOPASSWD: /bin/sh -c cp /tmp/scx-scomadm/scx.pem /etc/opt/microsoft/scx/ssl/scx.pem; rm -rf /tmp/scx-scomadm; /opt/microsoft/scx/bin/tools/scxadmin -restart
scomadm ALL=(root) NOPASSWD: /bin/sh -c cat /etc/opt/microsoft/scx/ssl/scx.pem
## Install or upgrade
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --install; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
scomadm ALL=(root) NOPASSWD: /bin/sh -c sh /tmp/scx-scomadm/scx-1.[5-9].[0-9]-[0-9][0-9][0-9].universal[[\:alpha\:]].[[\:digit\:]].x[6-8][4-6].sh --upgrade --force; EC=$?; cd /tmp; rm -rf /tmp/scx-scomadm; exit $EC
## Uninstall
scomadm ALL=(root) NOPASSWD: /bin/sh -c /opt/microsoft/scx/bin/uninstall
## Log file monitoring
scomuser ALL=(root) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
### Examples ###
## Custom shell command monitoring example – replace \<shell command\> with the correct command string
# scomuser ALL=(root) NOPASSWD: /bin/bash -c \<shell command\>
## Daemon diagnostic and restart recovery tasks example (using cron)
#scomuser ALL=(root) NOPASSWD: /bin/sh -c ps -ef | grep cron | grep -v grep
#scomuser ALL=(root) NOPASSWD: /usr/sbin/cron &
# End user configuration for Operations Manager agent
#-----------------------------------------------------------------------------------
기타 명령
ExecuteShellScript 메서드를 사용하여 관리자 권한 스크립트를 실행하는 경우 사용자에 대한 sudoers 파일에 다음 줄을 추가합니다.
scomuser ALL=(root) NOPASSWD: /etc/opt/microsoft/scx/conf/tmpdir/scx*
ExecuteShellScript 메서드가 임의로 생성된 파일 이름을 tmpdir 가진 임시 파일에 관리자 권한 스크립트의 내용을 복사하고 여기에서 실행하기 때문에 이 줄이 필요합니다.
ExecuteShellCommand 메서드를 사용하여 관리자 권한 명령을 실행하는 경우 sudoers 파일에 다음과 같이 추가합니다.
/bin/sh는 명령을 실행하는 사용자의 기본 셸이며(이 예제에서는)/usr/bin/vmstat -c는 실행하려는 명령입니다.
scomuser ALL=(root) NOPASSWD: /bin/sh -c /usr/bin/vmstat -c
명령 주위에는 셸만 인식하므로 따옴표가 없어야 합니다. sudo는 인식하지 않습니다.
문제 해결
Sudo 오류 로그
sudoers 구성과 관련된 인증 오류를 해결하는 가장 좋은 방법 중 하나는 에이전트 호스트에서 sudo 로그를 검사하는 것입니다.
- RedHat 기반 운영 체제의 경우 기본 로그 위치는
/var/log/secure. - Debian 기반 운영 체제의 경우 기본 로그 위치는
/var/log/auth.log.
/etc/sudoers 다른 운영 체제 또는 사용자 지정된 로그 위치를 사용하는 경우 로그가 현재 기록되는 위치를 확인하려면 매개 변수에 대한 logfile 파일을 확인합니다.
암호 프롬프트 및 시간 제한
기본적으로 sudo는 사용자에 대해 명령이 NOPASSWD 구성되지 않은 경우 암호를 묻는 메시지를 표시하고, 다음과 같은 메시지가 표시되면 암호를 자동으로 입력하는 기능이 없으며 모니터링을 중단합니다. 명령에 대해 구성되지 않은 경우 NOPASSWD 확장된 문제를 방지하려면 사용자 계정에 대한 sudoers에서 다음 옵션을 구성하는 것이 좋습니다.
Defaults:scomuser passwd_tries = 1, passwd_timeout = 1
다음은 사용자 scomuser에 대한 1분 암호 프롬프트 시간 제한을 설정하는 예제입니다. 그러면 sudo 구성 문제가 있는 경우 명령이 빠르게 실패할 수 있습니다.
암호 오류 또는 기타 인증 실패
암호 및 인증 구성에 대한 지침은 UNIX 및 Linux 컴퓨터에 액세스하기 위한 보안 자격 증명 계획을 참조 하세요.