Connect to the Internet by using a T1 line

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

To connect to the Internet by using a T1 line

Install the T1 adapter in your computer.
On your desktop, right-click My Computer, click Properties, and on the Hardware tab, click Add Hardware Wizard.
Configure the T1 adapter with the IP address allocated by your ISP.
After the T1 adapter is added and the server is restarted, verify that the T1 adapter appears as a network adapter under Network Interfaces in Routing and Remote Access.
Add a default network route that uses the T1 interface.

Note

A default network route has a Destination of 0.0.0.0, a Network mask of 0.0.0.0, and a Metric of 1. Because the T1 connection to the ISP is a point-to-point link, the Gateway IP address is not configurable.

Your server might function differently based on the version and edition of the operating system that is installed, your account permissions, and your menu settings. For more information, see Viewing Help on the Web.