ISP access methods

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

ISP access methods

You can create a connection to an Internet service provider (ISP) through a modem and telephone line, a Point-to-Point Protocol over Ethernet (PPPoE) broadband connection, an ISDN adapter and ISDN line, or an X.25 network.

If you are using a modem, you will want the fastest possible speed to reduce downloading time while on the Internet. A modem of 28.8 Kbps or above is recommended. For more information about modems, see Installing and configuring Modems.

Your Internet connection dials the ISP and logs you on. The logon sequence varies based on the requirements of the ISP that you are calling. Point-to-Point Protocol (PPP) connections are often entirely automatic. Serial Line Internet Protocol (SLIP) connections may require that you log on using the terminal window, which may or may not permit you to automate the logon process with Switch.inf file scripts. You can set the terminal window to appear during the logon process by selecting Show terminal window on the Security tab of the Dial-up Connection Properties dialog box.

For more information, see:

• TCP/IP

• Internet service providers

• Make an Internet connection

Note

• Before you create an Internet connection, check with your ISP to verify the required connection settings. A connection to your ISP may require one or more of the following settings:

  • A specific IP address.

  • IP header compression (for PPP).

  • DNS addresses and domain names.

  • Optional settings, such as Internet Protocol security (IPSec).

For information about creating an Internet connection, see Make an Internet connection