RAM, ROM, and Mass Storage Comparison (Windows CE 5.0)

아티클
09/19/2012

The following table shows the common use of various types of memory on a target device.

Memory type	Description	Use
RAM	RAM accommodates an object store and program memory. The object store resembles a permanent RAM disk. Data is retained when the OS suspends. A target device typically has a backup power supply for memory, which preserves data if power from the primary power supply is interrupted. For more information about the object store, see Object Store. Program memory is similar to RAM in a desktop computer. Program memory stores heaps and stacks for the applications that are running.	An application is paged to RAM and then executed.
ROM	Stores the OS and applications that are included with the OS.	If the data is not compressed, an application executes in place (XIP). If the data is compressed, an application is decompressed, paged to RAM, and then executed.
Flash	Typically used for data storage and can be used for program storage.	An application is paged to RAM and then executed. An application stored in flash memory is handled in the same manner as an application stored in ROM.

RAM

RAM accommodates an object store and program memory.

The object store resembles a permanent RAM disk. Data is retained when the OS suspends. A target device typically has a backup power supply for memory, which preserves data if power from the primary power supply is interrupted. For more information about the object store, see Object Store.

Program memory is similar to RAM in a desktop computer. Program memory stores heaps and stacks for the applications that are running.

An application is paged to RAM and then executed.

ROM

Stores the OS and applications that are included with the OS.

If the data is not compressed, an application executes in place (XIP).

If the data is compressed, an application is decompressed, paged to RAM, and then executed.

Flash

Typically used for data storage and can be used for program storage.

An application is paged to RAM and then executed.

An application stored in flash memory is handled in the same manner as an application stored in ROM.

If an application runs directly from ROM, RAM is conserved. The application also runs sooner because the data does not need to be copied to RAM.

Consider the speed of the flash memory and RAM in a target device when optimizing the target device. The following table shows ways to execute an application that is stored in flash memory.

Method of execution	Description of process
Application is copied to RAM and then executed	Compress the dynamic-link library (DLL) or executable file or move the file to the MODULES section. For more information, see MODULES Section. This approach introduces overhead while the module loads, but with the faster speed of RAM, the application executes more quickly after it loads.
Application is XIP	XIP reduces the amount of RAM used, but the application runs more slowly than it would from RAM.

When using flash memory, you should add a separate boot ROM to a release device. For more information, see Boot Loaders.

For a mass storage device, you should allocate an appropriate amount of RAM to the cache for the storage device. The larger the mass storage device, the larger the cache should be. The settings that determine the cache size are stored in the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\FATFS registry key.

The following table shows an appropriate amount of RAM to allocate to the cache for a storage device, and the corresponding registry entry that specifies the cache size.

Registry entry	Number of sectors	Cache size in kilobytes (KB)
2	2	1
4	4	2
8	8	4
10	16	8
20	16	32
40	64	32
80	128	64
100	256	128
200	512	256
400	1024	512
800	2048	1024
1000	4096	2048

다음을 통해 공유

RAM, ROM, and Mass Storage Comparison (Windows CE 5.0)

See Also

추가 리소스