How to Use the BSP for the SMDK2410 Samsung MCU Development Kit (Windows CE 5.0)
You can use the sample board support package (BSP) provided by Microsoft® Windows® CE for the SMDK2410 Samsung MCU Development Kit to quickly evaluate Windows CE operating system (OS) features.
For more information about the sample BSPs included in Microsoft Platform Builder for ARM microprocessors, see ARM BSPs.
Hardware and Software Assumptions
You included support for ARMV4I microprocessors when you installed Platform Builder.
If you did not, reinstall Platform Builder and include ARMV4I microprocessor support.
Note The ARMV4I is an ARMV4 build that supports interworking, which enables the ARMV4I to handle 32-bit code to and from 16-bit code jumps.
The ARMV4 kernel image is the same as the ARMV4I kernel image, except it does not support interworking.
After you select your choice of microprocessor support, all necessary tools and code binaries needed to support the processor architecture are installed.
You are downloading a Windows CE run-time image to an SMDK2410 Samsung MCU Development Kit.
To track your progress in the following table, select the check box next to each step.
| Step | Topic | |
|---|---|---|
| 1. From the New Platform Wizard, select support for ARMV4I microprocessors. | Creating an OS Design | |
| 2. Review the supported hardware and software features for the standard development board (SDB), and familiarize yourself with limitations that can affect your run-time image on the SDB.
An SDB is a hardware development system with which you can develop and test your OS design using a wide range of processors and peripherals. For more information, see Standard Development Board Design. |
SMDK2410 Samsung MCU Development Kit Supported Features | |
| 3. Set up the SDB. | Setting up the SMDK2410 Samsung MCU Development Kit Hardware | |
| 4. Modify the switch and jumper settings on the SDB. | Modifying the SMDK2410 Samsung MCU Development Kit Switches and Jumpers | |
| 5. Configure your terminal emulation application, for example, Microsoft HyperTerminal, to receive debug messages. | Configuring HyperTerminal for BSPs | |
| 6. Build the run-time image. | Building a Run-Time Image | |
| 7. Download the Ethernet boot loader to the SDB. | Downloading the Boot Loader to the SMDK2410 Samsung MCU Development Kit | |
| 8. Download the run-time image to the SDB. | Downloading the Run-Time Image to the SMDK2410 Samsung MCU Development Kit |
See Also
Supported Board Support Packages
Send Feedback on this topic to the authors