Configuring CLIENT1 (Windows CE 5.0)
In the IPv6 test lab, configure CLIENT1 as a client computer.
To configure CLIENT1
Configure the TCP/IP protocol using the following addresses:
- IP address: 10.0.1.3
- Subnet mask: 255.255.255.0
- Default gateway: 10.0.1.1
For more information, see Configuring a Device with a Static Address for the IPv6 Test Lab.
Verify the IP address by using IPConfig.
See Also
Creating the Run-Time Images for the IPv6 Test Lab | How to Set Up and Use an IPv6 Test Lab | IPConfig
Send Feedback on this topic to the authors