다음을 통해 공유


RASCNTL_SERVERSTATUS (Windows CE 5.0)

Send Feedback

This structure contains information about the status of a RAS server.

typedef struct tagRasCntlServerStatus {BOOLbEnable;DWORDbmFlags;BOOLbUseDhcpAddresses;DWORDdwStaticIpAddrStart;DWORDdwStaticIpAddrCount;DWORD bmAuthenticationMethods;DWORDdwNumLines;} RASCNTL_SERVERSTATUS, *PRASCNTL_SERVERSTATUS;

Members

  • bEnable
    Setting this member to TRUE enables RAS server configuration.

  • bmFlags
    Flags that specify restrictions for connections to the server. The flags can be set globally in the server's bmFlags setting, or per line in each line's bmFlags setting. The flags in effect for each line are the results of the OR of the global and per line settings. The following table shows the possible values for bmFlags.

    Flag Description
    PPPSRV_FLAG_REQUIRE_DATA_ENCRYPTION Require encryption on this connection.
    PPPSRV_FLAG_ALLOW_UNAUTHENTICATED_ACCESS Do not require authentication on the connection.
    PPPSRV_FLAG_NO_VJ_HEADER_COMPRESSION Prevent VJ TCP/IP header compression.
    PPPSRV_FLAG_NO_DATA_COMPRESSION Prevent MS data compression.
  • bUseDhcpAddresses
    Value that specifies whether the server should obtain addresses from a Dynamic Host Configuration Protocol (DHCP) server rather than from a static pool.

  • dwStaticIpAddrStart
    First address if a static IP address pool is being used.

  • dwStaticIpAddrCount
    Number of static IP addresses that follow IpAddrStart in an IP address pool.

  • bmAuthenticationMethods
    Set of bitmask flags that specify which authentication methods are allowed.

    The following table shows the bitmask flags that can be set for this member.

    Bitmask flag Description
    RASEO_ProhibitPAP Disallows PAP authentication.
    RASEO_ProhibitCHAP Disallows CHAP-MD5 authentication.
    RASEO_ProhibitMsCHAP Disallows MS-CHAP authentication.
    RASEO_ProhibitMsCHAP2 Disallows MS-CHAPv2 authentication.
  • dwNumLines
    Number of dial-up lines.

Remarks

This structure is returned by the RASCNTL_SERVER_GET_STATUS and RASCNTL_SERVER_GET_PARAMETERS IOCTLs and passed to the RASCNTL_SERVER_SET_PARAMETERS IOCTL.

Requirements

OS Versions: Windows CE .NET 4.0 and later.
Header: Ras.h.

See Also

RAS Server/PPTP Server (Incoming)

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.