Storage Device Block Driver Read/Write Test (Windows CE 5.0)
The Storage Device Block Driver Read/Write Test evaluates the ability of a device driver to read from and write to a storage device. The test assesses the ability of the device driver to handle multiple threads, multiple scatter/gather buffers, boundary limits, and bad parameters.
The following table shows the hardware requirements for the Storage Device Block Driver Read/Write Test.
| Requirements | Description |
|---|---|
| A storage device | A storage device that uses a PCMCIA slot and a PC Card device driver, for example, a PCMCIA ATA disk or PC Card. |
The following table shows the software requirements for the Storage Device Block Driver Read/Write Test.
| Requirements | Description |
|---|---|
| Rwtest.dll | Test .dll file. |
| Tux.exe | Tux Test Harness, which is required for executing the test. |
| Kato.dll | Kato Logging Engine, which is required for logging test data. |
| Tooltalk.dll | Application required by Tux.exe and Kato.dll. Handles the transport between the target device and the development workstation. |
Note When you run the Storage Device Block Driver Read/Write Test, the CETK temporarily copies files to the root directory of the target device. Before running the test, verify that there is at least 0.4 megabytes (MB) of free space in the root directory of the target device. If there is not sufficient space in the root directory of the target device, the test cannot run.
See Also
Storage Device Block Driver Read/Write Test Cases
Send Feedback on this topic to the authors