Smart Card Resource Manager Test (Windows CE 5.0)
The Smart Card Resource Manager Test includes multi-smart card queries, tracking tests, access tests, and direct access tests.
The following table shows the hardware requirements for the Smart Card Resource Manager Test.
| Requirements | Description |
|---|---|
| Smart card reader | A device that reads smart cards. The type of device driver required for a smart card reader is dependent upon the hardware chosen. |
| PC/SC compliance test card | A smart card that tests the functionality of the reader. |
The following table shows the software requirements for the Smart Card Resource Manager Test.
| Requirements | Description |
|---|---|
| Scardbvt.dll | Test .dll file. |
| Tux.exe | Tux Test Harness, which is required for executing the test. |
| Kato.dll | Kato Logging Engine, which is required for logging test data. |
| Tooltalk.dll | Application required by Tux.exe and Kato.dll. Handles the transport between the target device and the development workstation. |
Note When you run the Smart Card Resource Manager Test, the CETK temporarily copies files to the root directory of the target device. Before running the test, verify that there is at least 0.4 megabytes (MB) of free space in the root directory of the target device. If there is not sufficient space in the root directory of the target device, the test cannot run.
See Also
Running the Smart Card Resource Manager Test
Send Feedback on this topic to the authors