NETWORK (Windows CE 5.0)
This module performs general networking functionalities, such as host name resolution, adapter binding, IP address renewal and release, and network bridging for the Remote Configuration Framework.
The following table shows the configurable settings for NETWORK.
| Value : Type | Access | Index | Description |
|---|---|---|---|
| IPAddress : STRING | Read-write | AdapterName | Specifies the IP address of the device on the network. |
| Subnet : STRING | Read-write | AdapterName | Specifies the subnet. |
| DNS1 : STRING | Read-write | AdapterName | Specifies the primary DNS Name Server. |
| DNS2 : STRING | Read-write | AdapterName | Specifies the secondary DNS Name Server. |
| WINS1 : STRING | Read-write | AdapterName | Specifies the primary NetBIOS Name Server (WINS1). |
| WINS2 : STRING | Read-write | AdapterName | Specifies the secondary NETBIOS Name Server (WINS2). |
| GATEWAY : STRING | Read-write | AdapterName | Specifies the default gateway value. |
| DHCP : STRING | Read-write | AdapterName | If this value is set to "ENABLED," the DHCP allocator is enabled; if this value is set to "DISABLED," the DHCP allocator is disabled. |
| MBridgeBinding : STRING | Read-write | AdapterName | Specifies a list of bindings for the MAC bridge. |
| MACAddress : STRING | Read-write | AdapterName | Specifies the Media Access Control (MAC) address of the network adapter. |
| AutoDNS : DWORD | Read-write | AdapterName | If this value is set to 1, AutoDNS is enabled; if this value is set to 0, AutoDNS is disabled and Domain Name Server (DNS) is configured manually. |
| ProtocolsToBindTo : STRING | Read-write | AdapterName | Specifies the protocols a specific network adapter is bound to. |
| Release : DWORD | Write-only | AdapterName | Releases the IP address for a specific network adapter. |
| Renew : DWORD | Write-only | AdapterName | Renews the IP address for a specific network adapter. |
See Also
Remote Configuration Framework Modules
Send Feedback on this topic to the authors