다음을 통해 공유

Test Cases for the Radiometrics Test (Windows Embedded CE 6.0)

  • 아티클

1/6/2010

The test cases include TAPI test cases, data transfer test cases, RIL test cases, SIM manager test cases, an SMS test case, and a power consumption test case.

TAPI Test Cases

The TAPI test cases utilize the TAPI API set and provide pass or fail results that are closely aligned with user scenarios. The RIL API set is not used for voice call tests because each TAPI function implements a variety of RIL APIs. The following table describes the TAPI test cases.

Test Case Description

TSP_DialHangup

Initiates a voice call to a dialup server, waits for a connection, and then hangs up. Microsoft recommends that you use a local dialup server to eliminate potential failures due to long distance telephone calls.

TSP_DialBusy

Initiates a voice call to a busy phone number and then hangs up.

TSP_DialIncoming

This test performs the following steps:

  1. Places an initial call to a dialup server.
  2. Sends a DTMF sequence requesting a return call to the device. The MSIDN number within the SIM is used to determine the device telephone number.
  3. Disconnects the active call.
  4. Receives an incoming voice call.
  5. Disconnects the voice call.

TSP_Conference

Verifies voice call conferencing. This test performs the following steps:

  1. Places a voice call to a dialup server.
  2. Sends a DTMF sequence to instruct the server to keep the call active.
  3. Places the call on hold.
  4. Changes the call to active.
  5. Places the call on hold again.
  6. Places a second voice call to the dialup server.
  7. Sends a DTMF sequence to instruct the server to keep the second call active.
  8. Swaps active calls with calls that are on hold.
  9. Connects all calls as a conference call.
  10. All calls are disconnected.

Data Transfer Test Cases

The data transfer test cases exercise the wireless data functions and implement Windows Internet API (WinInet) to verify consistency with applications that use wireless data connectivity. The following table describes the data transfer test cases.

Test Case Description

Data_GPRS

Transfers data using the HTTP protocol. This test performs the following steps:

  1. Connects to the Internet using the packet data GUID located in Datatrans.xml.
  2. Opens an HTTP connection to the DOWNLOAD_URL stored in Datatrans.xml.
  3. Downloads a specific number of blocks, according to the BLOCK_SIZE and BLOCKS_PER_SESSION values test configuration file.
  4. Disconnects the connection.

Data_GPRSSuspendResume

Identical to the Data_GPRS test, but initiates a voice call between each block of data transfer.

Data_GPRSStability

Verifies the stability of a data transfer session. This test performs the following steps:

  1. Connects to the Internet using the packet data GUID located in Datatrans.xml.
  2. Opens an HTTP connection to the DOWNLOAD_URL location stored in the test configuration file.
  3. Waits for 2 minutes.
  4. Downloads 100k of data.
  5. Repeats steps 3 and 4 25 times. Voice calls are initiated during every other download attempt.

Data_CSD

Identical to the Data_GPRS test, but uses a circuit-switched GUID value.

RIL Test Cases

The RIL test cases exercise the various RIL APIs and provide feedback on performance for a broad range of functionality. The following table describes the RIL test cases.

Test Case Description

RIL_CallForward

Performs a variety of call forwarding operations, including:

  • Retrieving unconditional voice status.
  • Retrieving voice busy status.
  • Retrieving no reply voice status.
  • Retrieving not reachable voice status.
  • Setting and clearing unconditional voice status.
  • Setting and clearing voice busy status.
  • Setting and clearing not reachable voice status.
  • Setting and clearing no reply voice status with a 15 second delay.

RIL_GetSetEquipmentState

Verifies that the radio can be switched off and then on again.

RIL_GetLineStatus

Detects current line conditions. For example, this test detects when an incoming call is still ringing.

RIL_RegisterUnregister

De-registers the radio from the current network and then registers the radio with an available network.

RIL_GetCurrentOperator

Requests the identity of the current network, in numeric format.

RIL_GetOperatorList

Requests a list of all available networks but does not attempt to register with any of the networks.

RIL_PreferredOperator

Performs a series of operations on the list of preferred networks. This test performs the following steps:

  1. Sends a request for a list of preferred networks.
  2. Adds and then deletes a network from the mid-point of the list.
  3. Adds and then deletes the first network on the list.
  4. Adds and then deletes the last network on the list.

RIL_GetSignalQuality

Places a call to measure the RSSI value reported by the radio.

RIL_SendDTMF

Sends a single DTMF tone during a voice call. This test performs the following steps:

  1. Initiates a voice call to the dialup server.
  2. Waits for the server to answer.
  3. Sends DTMF tone 9.
  4. Hangs up.

RIL_CallerId

Verifies that the caller ID functionality is working properly. This test performs the following steps:

  1. Reads current status.
  2. Disables caller ID.
  3. Enables caller ID.

RIL_HideId

Tests the caller ID presentation. This test performs the following steps:

  1. Reads current status.
  2. Hides caller ID.
  3. Presents caller ID.

RIL_DialedId

Tests the presentation of called ID.

RIL_CallWaiting

Tests the call waiting supplementary service. This test performs the following steps:

  1. Reads current status.
  2. Enables call waiting for voice.
  3. Disables call waiting for voice.

RIL_AudioGain

Sets and transmits a fixed audio gain value.

RIL_GetUserIdentity

Tests the current subscriber serial number.

RIL_LockingStatus

Verifies the behavior of the SIM pin lock. the RILT_SIM_PWD value must be set to the current SIM pin within the Stinger.ini file prior to running this test. This test performs the following steps:

  1. Enables the SIM pin.
  2. Changes the SIM pin.
  3. Restores the SIM pin to the original value.
  4. Disables the SIM pin.

RIL_CallBarring

Tests the call barring functionality for a SIM.

RIL_GetEquipmentInfo

Reads serial numbers and other hardware-specific information such as, manufacturer ID, model ID, revision ID and serial number.

RIL_PhonebookOptions

Verifies that the phonebook location can be specified.

RIL_PhonebookEntry

Verifies read and write functionality for the phone book. This test performs the following steps:

  1. Establishes the size of the phone book file.
  2. Reads all phone book entries.
  3. Reads, writes, and then deletes the middle entry.
  4. Reads, writes, and then deletes the maximum entry.
  5. Reads, writes, and then deletes the minimum entry.

RIL_SetAudioDevices

Selects the handset as the audio input and output device.

RIL_GetSetBearer

Specifies the circuit-switched data bearer.

RIL_GetSetAudioMuting

Tests the mute functionality of the radio.

RIL_GetSubscriberNumbers

Reads the list of telephone numbers associated with a particular device.

RIL_GetRegistrationStatus

Queries the current voice registration status.

RIL_GetCallList

Reads a list of active calls in both idle mode and during a call.

RIL_USSD

Sends the *#10# unstructured supplementary service data (USSD) command to the network.

RIL_SendRestrictedSimCmd

Reads temporary location information from the SIM for a GSM device.

RIL_GetSimRecordStatus

Reads information on the EF-LOCI elementary SIM file.

RIL_GetSetMsgServiceOptions

Reads and writes Short Message Service (SMS) message storage configuration information to the SIM.

RIL_ReadWriteDeleteMsg

Tests the SMS store within the radio module. This test performs the following steps:

  1. Writes message to the SMS store.
  2. Reads the message and verifies the content.
  3. Deletes the message.

RIL_GetSetMsgConfig

Tests the SMSC SMS service center address. This test performs the following steps:

  1. Reads the SMSC value.
  2. Stores a test SMSC value.
  3. Reads and verifies the SMSC value.
  4. Restores the original SMSC value.

RIL_SendMsg

Tests the ability SMS message send and receive functionality.

RIL_GetSetGPRSContext

Stores and verifies the GPRS access point name.

RIL_QualityofService

Verifies the deleting of a quality of service profile.

RIL_GetGPRSRegStatus

Tests the GPRS registration status query functionality.

RIL_SetGPRSContextActivated

Activates GPRS context 1.

SIM Manager Test Cases

The SIM manager test cases use test the ability of the SIM manager to access functionality from the SIM card. The following table describes the SIM manager test cases.

Test Case Description

SIM_GetDevCaps

Tests the SIM-related capabilities of the radio.

SIM_InitializeDeinitialize

Initializes and de-initializes the SIM manager.

SIM_GetPhonebookStatus

Queries the maximum number of SIM phone book locations as well as the maximum SIM phone book size.

SIM_ReadWriteDeletePbook

Creates a test phone book entry and reads it from the phone book storage.

SIM_GetSmsStorageStatus

Reads the maximum SIM Short Message Service (SMS) storage size along with the total number of SMS messages currently in use.

SIM_ReadWriteDeleteMessage

Writes a test SMS message to the SMS storage within the SIM.

SIM_ReadWriteRecord

Carries out the following SIM operations on the EF-LOCI SIM file:

  • Reads status
  • Saves current information
  • Waits for a refresh notification
  • Saves test data
  • Reads test data
  • Restores original data

SIM_GetRecordInfo

Requests EF-LOCI SIM file information from the radio.

SIM_GetSetLockingStatus

Tests the SIM pin lock functionality.

SIM_ChangeLockingPassword

Changes the SIM PIN1 value.

SMS Test Cases

The Short Message Service (SMS) test case verifies that the radio module is able to send and receive a large number of SMS messages in a short period of time. The following table describes the SMS test cases.

Test Case Description

SMS_Multipart

Verifies that the radio module can send and receive a large number of SMS messages.

See Also

Concepts

Radiometrics Test