Command Line Parameters for the Two-Card Network Card Miniport Driver Test (Windows Embedded CE 6.0)
1/6/2010
The Two-Card Network Card Miniport Driver Test executes the tux –o –d ndt_2c command line on default execution. You can modify the test by editing the command line. For information about how to edit the command line for a test, see Editing the Command-Line for a Test. The following table shows the command line parameters for the Two-Card Network Card Miniport Driver Test.
| Command line parameter | Description |
|---|---|
-packets |
Log information when a test confirms that a packet has been sent or received. |
-nounbind |
Disable unbinding of other protocol drivers from the test adapter before the test is run. |
-beat delay |
Print debug output at intervals specified by the value of delay. The debug output contains information about the state of packet buffers for the test. The value of delay is given in milliseconds. |
-nostress |
Skip test cases 5 and 6. |
-delay interval |
Set the interval, in milliseconds (ms), between packets sent during test cases 5 and 6. The default interval is 10 ms. |