PASSWORD (Windows Embedded CE 6.0)
1/6/2010
The PASSWORD module configures and implements client password settings for the Remote Configuration Framework.
The following table shows the configurable settings for PASSWORD.
| Value : Type | Access | Index | Description |
|---|---|---|---|
PasswordEmpty : DWORD |
Read-only |
Not applicable |
If no Admin password has been set, this value will be set to 1. If an Admin password has been set, this value will not be present. |
PasswordSet : DWORD |
Read-only |
Not applicable |
If an Admin password has been set, this value will be set to 1. If an Admin password has not been set, this value will not be present. |
PWD : STRING |
Write-only |
Not applicable |
Specifies the value of the new password. |
PWDVERIFY : STRING |
Write-only |
Not applicable |
Specifies the verification value of the new password. |
PWDOLD : STRING |
Write-only |
Not applicable |
Specifies the value of the old password. |
SECURITYLEVEL : STRING |
Write-only |
Not applicable |
If this value is set to ENABLED, then the Web server will require authentication. Security Note This value should always be set when the password is set. |