NETLOG Module (Windows Embedded CE 6.0)
1/6/2010
This module manages and implements the Netlog tool for the Remote Configuration Framework. For more information, see Netlog.
The following table shows the configurable settings for NETLOG.
| Value : Type | Access | Index | Description |
|---|---|---|---|
USB : DWORD |
Read-write |
Not applicable |
If this value is set to 1, capturing over USB is enabled. |
Stopped : DWORD |
Read-only |
Not applicable |
If this value is set to 1, Netlog is stopped. |
LogName : STRING |
Read-only |
Not applicable |
Specifies the name of the log. |
PacketSize : DWORD |
Read-write |
Not applicable |
Specifies the maximum packet size captured, in bytes. |
HalfCaptureSize : DWORD |
Read-write |
Not applicable |
Specifies the maximum size of each of the two log files (netlog0.cap and netlog1.cap), in which Netlog stores logging data. |
Load : DWORD |
Write-only |
Not applicable |
If this value is set to 1, Netlog is loaded. If this value is set to 0, Netlog is unloaded. |
Start : DWORD |
Write-only |
Not applicable |
If this value is set to 1, Netlog is started. If this value is set to 0, Netlog is stopped. |
ClearLog : DWORD |
Write-only |
Not applicable |
If this value is set to 1, Netlog is stopped, and the log is cleared. |