T1_DATA (Windows Embedded CE 6.0)
1/6/2010
The T1_DATA structure is used by the Smart Card Driver Library for processing T1 I/O. It should not be directly modified by a driver.
Syntax
typedef struct _T1_DATA {
UCHAR InfSize;
ULONG BytesReceived;
ULONG BytesSent;
ULONG BytesToSend;
UCHAR LastError;
UCHAR NAD;
ULONG PrevState;
UCHAR Resend;
UCHAR Resynch;
UCHAR SSN;
ULONG State;
UCHAR Wtx;
} T1_DATA, *PT1_DATA;
Members
- InfSize
Current information field size that can be transmitted.
- BytesReceived
Number of bytes already received from the smart card.
- BytesSent
Number of bytes already sent to the smart card.
- BytesToSend
Number of bytes remaining to send.
- LastError
The T1 error code of the last block received.
- NAD
The Node Address byte to be sent to the card.
- PrevState
The state before an error occurred.
- Resend
A resend counter.
- Resynch
A resync counter.
- SSN
The Send Sequence Number; either or 1 as defined in ISO 7816-3.
- State
The current state of the protocol.
- Wtx
Contains the waiting time extension for a T=1 transmission. If nonzero, this is a multiplier for the block waiting time. Usually, the driver should time out if the block waiting time expires. Several smart card operations need longer time, so the smart card answers with a waiting time extension, and therefore the block waiting time must be multiplied with the Wtx value. Note that this value only applies as a waiting extension if the value is nonzero.
Requirements
| Header | smclib.h |
| Windows Embedded CE | Windows CE 3.0 and later |