Device Manager (Windows CE 5.0)
The Device Manager is loaded by the kernel, it runs continuously, and it manages loaded device drivers and their interfaces. When the Device Manager loads, it also loads the I/O Resource Manager to read a list of available resources from the registry.
The Device Manager tracks interfaces advertised by drivers and supports searches for drivers based on a globally unique identifier (GUID). The IClass interface can associate an interface GUID with the driver's legacy name, its $device name, or its $bus name. For example, COM1:, $device\com1, or $bus\pci_0_3_0.
In This Section
- Device Manager Architecture
Provides information about how the Device Manager manages devices. - Device Manager Registry Keys
Describes the registry keys used by the Device Manager. - Device Manager Security
Describes how the Device Manager validates input/output (I/O) buffers and how it enforces trusted-caller-only access to certain devices. - Device File Names
Describes the file names used by devices and how to access devices with the CreateFile function. - I/O Resource Manager
Describes how the I/O Resource Manager manages interrupt requests (IRQs) and I/O address spaces and describes how to configure IRQs and I/O address space resources yourself.
Related Sections
- Interrupts
Explains interrupts and how to set up interrupt service routines (ISRs). - Power Management
Describes the power management capabilities provided by the Windows CE operating system.
Send Feedback on this topic to the authors