편집

다음을 통해 공유

Set-VpnConnectionIPsecConfiguration

  • Reference
Module:
VpnClient

Sets the IPsec parameters of a VPN connection.

Syntax

Set-VpnConnectionIPsecConfiguration
   [-ConnectionName] <String>
   [-Force]
   [-AllUserConnection]
   [-RevertToDefault]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-VpnConnectionIPsecConfiguration
   [-ConnectionName] <String>
   [-AuthenticationTransformConstants] <AuthenticationTransformConstants>
   [-CipherTransformConstants] <CipherTransformConstants>
   [-EncryptionMethod] <EncryptionMethod>
   [-IntegrityCheckMethod] <IntegrityCheckMethod>
   [-PfsGroup] <PfsGroup>
   [-DHGroup] <DHGroup>
   [-PassThru]
   [-Force]
   [-AllUserConnection]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-VpnConnectionIpsecConfiguration cmdlet sets the IPsec parameters of a VPN connection. The settings apply only to IKEv2 and L2TP VPN connections.

Examples

Example 1: Set the IPsec configuration for an IKEv2 tunnel

PS C:\> Add-VpnConnection -Name "Contoso" -ServerAddress 176.16.1.2 -TunnelType "Ikev2"
PS C:\> Set-VpnConnectionIPsecConfiguration -ConnectionName "Contoso" -AuthenticationTransformConstants None -CipherTransformConstants AES256 -EncryptionMethod AES256 -IntegrityCheckMethod SHA384 -PfsGroup None -DHGroup ECP384 -PassThru -Force
AuthenticationTransformConstants : None

CipherTransformConstants         : AES256

DHGroup                          : ECP384

IntegrityCheckMethod             : SHA384

PfsGroup                         : None

EncryptionMethod                 : AES256

This example sets the IPsec configuration for a VPN connection using IKEv2.

The first command uses the Add-VpnConnection cmdlet to add a VPN connection on the server with the address 176.16.1.2. The cmdlet specifies an IKEv2 tunnel.

The second command uses the Set-VpnConnectionIPsecConfiguration cmdlet to set the configuration by using the ConnectionName parameter. The command also specifies values for the CipherTransformConstants, EncryptionMethod, IntegrityCheckMethod, and DHGroup parameters.

Example 2: Set the IPsec configuration for an L2TP tunnel

PS C:\> Add-VpnConnection -Name "Contoso" -ServerAddress 176.16.1.2 -TunnelType "L2tp"
PS C:\> Set-VpnConnectionIPsecConfiguration -ConnectionName "Contoso" -AuthenticationTransformConstants None -CipherTransformConstants AES128 -EncryptionMethod AES128 -IntegrityCheckMethod SHA256 -PfsGroup None -DHGroup ECP256 -PassThru -Force
AuthenticationTransformConstants : None

CipherTransformConstants         : AES128

DHGroup                          : ECP256

IntegrityCheckMethod             : SHA256

PfsGroup                         : None

EncryptionMethod                 : AES128

This example sets the IPsec configuration for an L2TP tunnel.

The first command uses Add-VpnConnection to add a VPN connection on the server with the address 176.16.1.2. The command also specifies an L2TP tunnel.

The second command uses Set-VpnConnectionIPsecConfiguration to set the configuration. The command also specifies values for the CipherTransformConstants, EncryptionMethod, IntegrityCheckMethod, and DHGroup parameters.

Example 3: Set the IPsec configuration for an IKEv2 tunnel with 128-bit data blocks

PS C:\>Add-VpnConnection -Name "Contoso" -ServerAddress 176.16.1.2 -TunnelType "Ikev2"
PS C:\> Set-VpnConnectionIPsecConfiguration -ConnectionName "Contoso" -AuthenticationTransformConstants GCMAES128 -CipherTransformConstants None -EncryptionMethod AES128 -IntegrityCheckMethod SHA256 -PfsGroup None -DHGroup ECP256 -PassThru -Force
AuthenticationTransformConstants : GCMAES128

CipherTransformConstants         : None

DHGroup                          : ECP256

IntegrityCheckMethod             : SHA256

PfsGroup                         : None

EncryptionMethod                 : AES128

This example sets the IPsec configuration for an IKEv2 tunnel with authentication transform constants.

The first command uses Add-VpnConnection to add a VPN connection on the server with the address 176.16.1.2. The cmdlet specifies an IKEv2 tunnel.

The second command uses Set-VpnConnectionIPsecConfiguration to set the configuration. The command also specifies values for the CipherTransformConstants, EncryptionMethod, IntegrityCheckMethod, and DHGroup parameters, as well as specifying a value for the AuthenticationTransformConstants parameter.

Example 4: Set the IPsec configuration for an IKEv2 tunnel with 256-bit data blocks

PS C:\>Add-VpnConnection -Name "Contoso" -ServerAddress 176.16.1.2 -TunnelType "Ikev2"
PS C:\> Set-VpnConnectionIPsecConfiguration -ConnectionName "Contoso" -AuthenticationTransformConstants GCMAES256 -CipherTransformConstants None -EncryptionMethod AES256 -IntegrityCheckMethod SHA384 -PfsGroup None -DHGroup ECP384 -PassThru -Force
AuthenticationTransformConstants : GCMAES256

CipherTransformConstants         : None

DHGroup                          : ECP384

IntegrityCheckMethod             : SHA384

PfsGroup                         : None

EncryptionMethod                 : AES256

This example sets the IPsec configuration for an IKEv2 tunnel, and specifies authentication transform constants.

The first command uses Add-VpnConnection to add a VPN connection on the server with the address 176.16.1.2. The cmdlet specifies an IKEv2 tunnel.

The second command uses Set-VpnConnectionIPsecConfiguration to set the configuration. The command also specifies values for the CipherTransformConstants, EncryptionMethod, IntegrityCheckMethod, and DHGroup parameters, as well as specifying a value for the AuthenticationTransformConstants parameter.

Parameters

-AllUserConnection

Indicates that the VPN connection being modified is in the global phone book.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AuthenticationTransformConstants

Specifies authentication header (AH) transform in the IPsec policy. For more information, see the Set-VpnServerIPsecConfiguration cmdlet. The acceptable values for this parameter are:

  • MD596
  • SHA196
  • SHA256128
  • GCMAES128
  • GCMAES192
  • GCMAES256
  • None
Type:AuthenticationTransformConstants
Accepted values:MD596, SHA196, SHA256128, GCMAES128, GCMAES192, GCMAES256, None
Position:2
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CipherTransformConstants

Specifies Encapsulating Security Payload (ESP) cipher transform in the IPsec policy. Acceptable values for this parameter are:

  • DES
  • DES3
  • AES128
  • AES192
  • AES256
  • GCMAES128
  • GCMAES192
  • GCMAES256
  • None
Type:CipherTransformConstants
Accepted values:DES, DES3, AES128, AES192, AES256, GCMAES128, GCMAES192, GCMAES256, None
Position:3
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ConnectionName

Specifies the name of a VPN connection profile to modify. To view existing VPN connection profiles, use the Get-VpnConnection cmdlet.

Type:String
Aliases:Name
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-DHGroup

Specifies the Diffie-Hellman (DH) Group to use during IKE key exchanges. The acceptable values for this parameter are:

  • None
  • Group1
  • Group2
  • Group14
  • ECP256
  • ECP384
  • Group24
Type:DHGroup
Accepted values:None, Group1, Group2, Group14, ECP256, ECP384, Group24
Position:4
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-EncryptionMethod

Specifies the encryption method. The acceptable values for this parameter are:

  • DES
  • DES3
  • AES128
  • AES192
  • AES256
  • GCMAES128
  • GCMAES256
Type:EncryptionMethod
Accepted values:DES, DES3, AES128, AES192, AES256, GCMAES128, GCMAES256
Position:5
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Force

Forces the command to run without asking for user confirmation.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IntegrityCheckMethod

Specifies the integrity check method used to protect data from tampering. The acceptable values for this parameter are:

  • MD5
  • SHA1
  • SHA256
  • SHA384
Type:IntegrityCheckMethod
Accepted values:MD5, SHA1, SHA256, SHA384
Position:6
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output. If you specify this parameter, the cmdlet returns the VpnConnection object that contains the VpnConnection configuration settings.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PfsGroup

Specifies the Perfect Forwarding Secrecy (PFS) Group in the IPsec policy. The acceptable values for this parameter are:

  • None
  • PFS1
  • PFS2
  • PFS2048
  • ECP256
  • ECP384
  • PFSMM
  • PFS24
Type:PfsGroup
Accepted values:None, PFS1, PFS2, PFS2048, ECP256, ECP384, PFSMM, PFS24
Position:7
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-RevertToDefault

Indicates that the cmdlet sets the IPsec parameters to the default values.

Type:SwitchParameter
Position:2
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Outputs

CimInstance