Set-CsTenantNetworkSubnet
As an admin, you can use the Teams PowerShell command, Set-CsTenantNetworkSubnet to define network subnets and assign them to network sites. Each internal subnet may only be associated with one site. The organization's network subnet is used for Location-Based Routing.
Syntax
Set-CsTenantNetworkSubnet
[[-Identity] <string>]
[-Description <string>]
[-MaskBits <int>]
[-NetworkSiteID <string>]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
IP subnets at the location where Teams endpoints can connect to the network must be defined and associated to a defined network in order to enforce toll bypass. Multiple subnets may be associated with the same network site, but multiple sites may not be associated with a same subnet. This association of subnets enables Location-Based Routing to locate the endpoints geographically to determine if a given PSTN call should be allowed. Both IPv4 and IPv6 subnets are supported. When determining if a Teams endpoint is located at a site an IPv6 address will be checked for a match first.
Examples
Example 1
PS C:\> Set-CsTenantNetworkSubnet -Identity "192.168.0.1" -MaskBits "24" -NetworkSiteID "site1"The command shown in Example 1 set the network subnet '192.168.0.1'. The subnet is in IPv4 format, and the subnet is assigned to network site 'site1'. The maskbits is set to 24.
IPv4 format subnet accepts maskbits from 0 to 32 inclusive.
Example 2
PS C:\> Set-CsTenantNetworkSubnet -Identity "2001:4898:e8:25:844e:926f:85ad:dd8e" -MaskBits "120" -NetworkSiteID "site1" -Description "Subnet 2001:4898:e8:25:844e:926f:85ad:dd8e"The command shown in Example 2 set the network subnet '2001:4898:e8:25:844e:926f:85ad:dd8e' with description 'Subnet 2001:4898:e8:25:844e:926f:85ad:dd8e'. The subnet is in IPv6 format, and the subnet is assigned to network site 'site1'. The maskbits is set to 120.
IPv6 format subnet accepts maskbits from 0 to 128 inclusive.
Parameters
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
Provide a description of the network subnet to identify purpose of setting it.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Identity
Unique identifier for the network subnet to be set.
| Type: | String |
| Position: | 1 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaskBits
This parameter determines the length of bits to mask to the subnet.
IPv4 format subnet accepts maskbits from 0 to 32 inclusive. IPv6 format subnet accepts maskbits from 0 to 128 inclusive.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NetworkSiteID
NetworkSiteID is the identifier for the network site which the current network subnet is associating to.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |