New-NetIntentAdapterPropertyOverrides
Creates a new instance of network adapter property overrides which can be used to supply granular values to Set-NetIntent.
Syntax
New-NetIntentAdapterPropertyOverrides
[-EncapOverhead <Int32>]
[-EncapsulatedPacketTaskOffload <Int32>]
[-EncapsulatedPacketTaskOffloadNvgre <Int32>]
[-EncapsulatedPacketTaskOffloadVxlan <Int32>]
[-FlowControl <Int32>]
[-InterruptModeration <Int32>]
[-IPChecksumOffloadIPv4 <Int32>]
[-JumboPacket <Int32>]
[-LsoV2IPv4 <Int32>]
[-LsoV2IPv6 <Int32>]
[-NetworkDirect <Int32>]
[-NetworkDirectTechnology <Int32>]
[-NumaNodeId <Int32>]
[-PacketDirect <Int32>]
[-PriorityVLANTag <Int32>]
[-PtpHardwareTimestamp <Int32>]
[-QOS <Int32>]
[-QosOffload <Int32>]
[-ReceiveBuffers <Int32>]
[-RscIPv4 <Int32>]
[-RscIPv6 <Int32>]
[-RssOnHostVPorts <Int32>]
[-Sriov <Int32>]
[-TCPUDPChecksumOffloadIPv4 <Int32>]
[-TCPUDPChecksumOffloadIPv6 <Int32>]
[-UDPChecksumOffloadIPv4 <Int32>]
[-UDPChecksumOffloadIPv6 <Int32>]
[-TransmitBuffers <Int32>]
[-UsoIPv4 <Int32>]
[-UsoIPv6 <Int32>]
[-VMQ <Int32>]
[-VxlanUDPPortNumber <Int32>]
[-VlanID <UInt16>]
[<CommonParameters>] Description
The New-NetIntentAdapterPropertyOverrides cmdlet creates a new instance of network adapter
property overrides, which is used to specify granular settings for adapter properties that can be
applied using the Set-NetIntent cmdlet. These settings allow administrators to fine-tune network
adapter properties to optimize performance and functionality for specific network intents.
Examples
Example
New-NetIntentAdapterPropertyOverrides -EncapOverhead 50 -FlowControl 1 -JumboPacket 9000This example creates a new instance of adapter property override with an encapsulation overhead of
50 bytes, with flow control enabled, and jumbo packets set to 9000 bytes.
Parameters
-EncapOverhead
Specifies the value of the encapsulation overhead.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EncapsulatedPacketTaskOffload
Specifies the value of the encapsulated packet task offload.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EncapsulatedPacketTaskOffloadNvgre
Specifies the value of the encapsulated packet task offload for NVGRE.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EncapsulatedPacketTaskOffloadVxlan
Specifies the value of the encapsulated packet task offload for VXLAN.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FlowControl
Specifies if flow control is to be used.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InterruptModeration
Specifies the interrupt moderation rate.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPChecksumOffloadIPv4
Specifies the IPv4 checksum offload value.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-JumboPacket
Specifies the maximum size for jumbo packets.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LsoV2IPv4
Specifies the value of large send offload version 2 (LSO V2) for IPv6.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LsoV2IPv6
Specifies the value of large send offload version 2 (LSO V2) for IPv6.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NetworkDirect
Specifies the Network Direct value.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NetworkDirectTechnology
Specifies the Network Direct technology value.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NumaNodeId
Specifies the NUMA node ID to use for the network adapter.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PacketDirect
Specifies the Packet Direct value.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PriorityVLANTag
Specifies the priority value of VLAN tagging.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PtpHardwareTimestamp
Specifies the hardware timestamp for the Precision Time Protocol (PTP).
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-QOS
Specifies the Quality of Service (QoS) value for the network adapter.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-QosOffload
Specifies whether QoS offloading is to be enabled.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ReceiveBuffers
Specifies the number of receive buffers to use.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RscIPv4
Specifies the value of Receive Segment Coalescing (RSC) for IPv4.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RscIPv6
Specifies the value of Receive Segment Coalescing (RSC) for IPv6.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RssOnHostVPorts
Specifies the RSS on host virtual ports.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Sriov
Specifies the SR-IOV value.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TCPUDPChecksumOffloadIPv4
Specifies the TCP/UDP checksum offload value for IPv4.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TCPUDPChecksumOffloadIPv6
Specifies the TCP/UDP checksum offload value for IPv6.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TransmitBuffers
Specifies the number of transmit buffers to be used.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UDPChecksumOffloadIPv4
Specifies the UDP checksum offload for IPv4.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UDPChecksumOffloadIPv6
Specifies the UDP checksum offload for IPv6.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UsoIPv4
Specifies the UDP segment offload (USO) for IPv4.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UsoIPv6
Specifies the UDP segment offload (USO) for IPv6.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VlanID
Specifies the VLAN ID.
| Type: | UInt16 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VMQ
Specifies the Virtual Machine Queue (VMQ) to use.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VxlanUDPPortNumber
Specifies the UDP port number to use for VXLAN.
| Type: | Int32 |
| Position: | Named |
| Default value: | 0 |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |