Get-IpamAddress

Reference

Module:: IpamServer

Gets IP addresses from IPAM.

Syntax

Get-IpamAddress
   [-IpAddress] <IPAddress[]>
   [-ManagedByService <String[]>]
   [-ServiceInstance <String[]>]
   [-NetworkType <VirtualizationType[]>]
   [-AddressSpace <String[]>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [<CommonParameters>]

Get-IpamAddress
   -AddressFamily <AddressFamily[]>
   [-AddressCategory <AddressCategory[]>]
   [-ManagedByService <String[]>]
   [-ServiceInstance <String[]>]
   [-NetworkType <VirtualizationType[]>]
   [-AddressSpace <String[]>]
   [-Unmapped]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [<CommonParameters>]

Get-IpamAddress
   -MappingToBlock <CimInstance>
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [<CommonParameters>]

Get-IpamAddress
   -MappingToSubnet <CimInstance>
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [<CommonParameters>]

Get-IpamAddress
   -MappingToRange <CimInstance>
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [<CommonParameters>]

Description

The Get-IpamAddress cmdlet gets IP addresses from IP Address Management (IPAM). Specify the IpAddress parameter to retrieve an IP address. Specify the AddressFamily parameter to retrieve a set of IP addresses for address families. You can also get addresses that belong to a range, a subnet, or an address block.

Examples

Example 1: Get all private physical IPv4 addresses

PS C:\> Get-IpamAddress -AddressFamily IPv4 -AddressCategory Private -AddressSpace "Default"

This command gets all private physical IPv4 addresses in IPAM. Because the command specifies the Default address space, the command gets provider or non-virtualized IP addresses from all address spaces in IPAM.

Example 2: Get private IPv4 addresses for provider networks

PS C:\> Get-IpamAddress -AddressFamily IPv4 -AddressCategory Private -NetworkType Provider

This command gets all private IPv4 addresses for provider networks. Because the command does not specify the AddressSpace parameter, the command gets addresses that belong to all address spaces in IPAM.

Example 3: Get private IPv4 addresses from the default address space

PS C:\> Get-IpamAddress -AddressFamily IPv4 -AddressCategory Private -NetworkType Provider -AddressSpace "Default"

This command gets all private IPv4 addresses for provider networks. Because the command specifies the Default address space, the command gets IP addresses from all address spaces configured in IPAM.

Example 4: Get private IPv4 addresses for customer networks

PS C:\> Get-IpamAddress -AddressFamily IPv4 -AddressCategory Private -NetworkType Customer

This command gets all private IPv4 addresses for customer networks. Because the command does not specify the AddressSpace parameter, the command gets addresses that belong to all address spaces configured in IPAM.

Example 5: Get private IPv4 addresses for customer networks from an address space

PS C:\> Get-IpamAddress -AddressFamily IPv4 -AddressCategory Private -NetworkType Customer -AddressSpace "ContosoAddSpace01"

This command gets all private IPv4 addresses for customer networks that belong to the address space named ContosoAddSpace01.

Example 6: Get physical IP addresses from all address spaces

PS C:\> Get-IpamAddress -IpAddress 10.12.1.1, 10.12.3.1

This command gets the physical IP addresses 10.12.1.1 and 10.12.3.1. Because the command does not specify the AddressSpace parameter, the command gets IP addresses from all address spaces which match the IP address 10.12.1.1 and 10.12.3.1.

Example 7: Get duplicate addresses in an address space

PS C:\> Get-IpamAddress -AddressFamily IPv4 -AddressSpace Default | Where-Object {$_.duplicate -eq $true} | Format-List IPAddress, NetworkType, ManagedByService, ServiceInstance, ProviderAddressSpace
IpAddress            : 172.16.10.16

NetworkType          : Provider

ManagedByService     : VMM

ServiceInstance      : vmm1.contoso.com

ProviderAddressSpace : Default
IpAddress            : 172.16.10.16

NetworkType          : Provider

Duplicate            : True

ManagedByService     : IPAM

ServiceInstance      : Localhost

ProviderAddressSpace : Default

This command gets all duplicate IPv4 addresses in the default provider address space. The Default address space is the address space to which the IPAM entity belongs. The command returns two addresses that have the IP address 172.16.10.16. One address is managed by IPAM and the other address is managed by vmmblue_1. The IPAM server marks both these addresses as duplicate. The command uses the Format-List cmdlet to display the output in the form of a table. For more information, type Get-Help Format-Table.

Example 8: Get IP addresses that map to a subnet

PS C:\> $ContosoPhysicalSubnet = Get-IpamSubnet -NetworkId "10.12.0.0/16"
PS C:\> Get-IpamAddress -MappingToSubnet $ContosoPhysicalSubnet

This example gets all IP addresses that map to a subnet. Because the network type of the subnet is non-virtualized, the result contains only physical addresses and the fabric addresses from the default address space which belong to the subnet.

The first command uses the Get-IpamSubnet cmdlet to get the IpamSubnet object that contain subnets configured in IPAM for the network that has the ID 10.12.0.0/16. The command stores the object in the $ContosoPhysicalSubnet variable.

The second command gets all the IP addresses that belong to the IP subnet stored in the $ContosoPhysicalSubnet variable.

Example 9: Get all IP address that map to a an IP range

PS C:\> $Range = Get-IpamRange -StartIPAddress 10.12.1.1 -EndIPAddress 10.12.1.254
PS C:\> Get-IpamAddress -MappingToRange $Range

This example gets all IP addresses that belong to a range of IP addresses.

The first command uses the Get-IpamRange cmdlet to get an IpamRange object that contains an IP range configured in IPAM. The command stores the object in the $Range variable.

The second command gets all the IP addresses that belong to the range stored in the $Range variable.

Parameters

-AddressCategory

Specifies an array of IP address categories. If you specify this parameter, you must specify the AddressFamily parameter.

The acceptable values for this parameter are:

Public
Private

Type:	AddressCategory[]
Accepted values:	Public, Private, Global
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-AddressFamily

Specifies an array of address families of IP addresses.

The acceptable values for this parameter are:

IPv4
IPv6

Type:	AddressFamily[]
Accepted values:	IPv4, IPv6
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-AddressSpace

Specifies an array of names of address spaces. If you do not specify this parameter, the cmdlet gets the addresses for all address spaces in IPAM. If you specify this parameter, you must specify the AddressFamily parameter.

Type:	String[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.

For more information about Windows PowerShell background jobs, see about_Jobs.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:	CimSession[]
Aliases:	Session
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-IpAddress

Specifies an array of IP addresses.

Type:	IPAddress[]
Position:	1
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-ManagedByService

Specifies an array of names of the services that manage the IP addresses. The values that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM.

You can use the Add-IpamCustomValue to add a value to the ManagedByService custom field in IPAM. You can use the Remove-IpamCustomValue to remove a value from the ManagedByService custom field in IPAM.

Type:	String[]
Aliases:	MB
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-MappingToBlock

Specifies an IP block. The cmdlet gets the addresses that belong to the IP block.

Type:	CimInstance
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-MappingToRange

Specifies an IP address range. The cmdlet gets the addresses that belong to the IP range.

Type:	CimInstance
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-MappingToSubnet

Specifies an IP subnet. The cmdlet gets the addresses that belong to the IP subnet.

Type:	CimInstance
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-NetworkType

Specifies the network type of the address. The acceptable values for this parameter are:

Provider
Customer
NonVirtualized

The default value is NonVirtualized.

If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.

Type:	VirtualizationType[]
Accepted values:	NonVirtualized, Provider, Customer
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-ServiceInstance

Specifies an array of instances of the services that manage the IP addresses. Specify the instances of the service that you specified for the ManagedByService parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.

Type:	String[]
Aliases:	SI
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:	Int32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Unmapped

Indicates that the cmdlet gets addresses that do not belong to any address families of IP addresses in IPAM.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

Outputs

IpamAddress[]

This cmdlet returns an object that represents a set of IP addresses on the IPAM server.

다음을 통해 공유

Get-IpamAddress

Syntax

Description

Examples

Example 1: Get all private physical IPv4 addresses

Example 2: Get private IPv4 addresses for provider networks

Example 3: Get private IPv4 addresses from the default address space

Example 4: Get private IPv4 addresses for customer networks

Example 5: Get private IPv4 addresses for customer networks from an address space

Example 6: Get physical IP addresses from all address spaces

Example 7: Get duplicate addresses in an address space

Example 8: Get IP addresses that map to a subnet

Example 9: Get all IP address that map to a an IP range

Parameters

-AddressCategory

-AddressFamily

-AddressSpace

-AsJob

-CimSession

-IpAddress

-ManagedByService

-MappingToBlock

-MappingToRange

-MappingToSubnet

-NetworkType

-ServiceInstance

-ThrottleLimit

-Unmapped

Outputs

피드백

추가 리소스

다음을 통해 공유

Get-IpamAddress

Syntax

Description

Examples

Example 1: Get all private physical IPv4 addresses

Example 2: Get private IPv4 addresses for provider networks

Example 3: Get private IPv4 addresses from the default address space

Example 4: Get private IPv4 addresses for customer networks

Example 5: Get private IPv4 addresses for customer networks from an address space

Example 6: Get physical IP addresses from all address spaces

Example 7: Get duplicate addresses in an address space

Example 8: Get IP addresses that map to a subnet

Example 9: Get all IP address that map to a an IP range

Parameters

-AddressCategory

-AddressFamily

-AddressSpace

-AsJob

-CimSession

-IpAddress

-ManagedByService

-MappingToBlock

-MappingToRange

-MappingToSubnet

-NetworkType

-ServiceInstance

-ThrottleLimit

-Unmapped

Outputs

Related Links

피드백

추가 리소스