New-AzMobileNetworkAttachedDataNetwork
Creates or updates an attached data network. Must be created in the same location as its parent packet core data plane.
Syntax
New-AzMobileNetworkAttachedDataNetwork
-Name <String>
-PacketCoreControlPlaneName <String>
-PacketCoreDataPlaneName <String>
-ResourceGroupName <String>
[-SubscriptionId <String>]
-DnsAddress <String[]>
-Location <String>
[-NaptConfigurationEnabled <NaptEnabled>]
[-NaptConfigurationPinholeLimit <Int32>]
[-PinholeTimeoutIcmp <Int32>]
[-PinholeTimeoutTcp <Int32>]
[-PinholeTimeoutUdp <Int32>]
[-PortRangeMaxPort <Int32>]
[-PortRangeMinPort <Int32>]
[-PortReuseHoldTimeTcp <Int32>]
[-PortReuseHoldTimeUdp <Int32>]
[-Tag <Hashtable>]
[-UserEquipmentAddressPoolPrefix <String[]>]
[-UserEquipmentStaticAddressPoolPrefix <String[]>]
[-UserPlaneDataInterfaceIpv4Address <String>]
[-UserPlaneDataInterfaceIpv4Gateway <String>]
[-UserPlaneDataInterfaceIpv4Subnet <String>]
[-UserPlaneDataInterfaceName <String>]
[-DefaultProfile <PSObject>]
[-AsJob]
[-NoWait]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
Creates or updates an attached data network. Must be created in the same location as its parent packet core data plane.
Examples
Example 1: Creates or updates an attached data network.
$dns=@("1.1.1.1", "1.1.1.2")
New-AzMobileNetworkAttachedDataNetwork -Name azps-mn-adn -PacketCoreControlPlaneName azps-mn-pccp -PacketCoreDataPlaneName azps-mn-pcdp -ResourceGroupName azps_test_group -DnsAddress $dns -Location eastus -UserPlaneDataInterfaceIpv4Address 10.0.0.10 -UserPlaneDataInterfaceIpv4Gateway 10.0.0.1 -UserPlaneDataInterfaceIpv4Subnet 10.0.0.0/24 -UserPlaneDataInterfaceName N6
Location Name ResourceGroupName ProvisioningState
-------- ---- ----------------- -----------------
eastus azps-mn-adn azps_test_group SucceededCreates or updates an attached data network. Must be created in the same location as its parent packet core data plane.
Parameters
-AsJob
Run the command as a job
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DefaultProfile
The DefaultProfile parameter is not functional. Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
| Type: | PSObject |
| Aliases: | AzureRMContext, AzureCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DnsAddress
The DNS servers to signal to UEs to use for this attached data network. This configuration is mandatory - if you don't want DNS servers, you must provide an empty array.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Location
The geo-location where the resource lives
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Name
The name of the attached data network.
| Type: | String |
| Aliases: | AttachedDataNetworkName |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NaptConfigurationEnabled
Whether NAPT is enabled for connections to this attached data network.
| Type: | NaptEnabled |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NaptConfigurationPinholeLimit
Maximum number of UDP and TCP pinholes that can be open simultaneously on the core interface. For 5G networks, this is the N6 interface. For 4G networks, this is the SGi interface.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NoWait
Run the command asynchronously
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PacketCoreControlPlaneName
The name of the packet core control plane.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PacketCoreDataPlaneName
The name of the packet core data plane.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PinholeTimeoutIcmp
Pinhole timeout for ICMP pinholes in seconds. Default for ICMP Echo is 30 seconds.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PinholeTimeoutTcp
Pinhole timeout for TCP pinholes in seconds. Default for TCP is 3 minutes.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PinholeTimeoutUdp
Pinhole timeout for UDP pinholes in seconds. Default for UDP is 30 seconds.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PortRangeMaxPort
The maximum port number
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PortRangeMinPort
The minimum port number
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PortReuseHoldTimeTcp
Minimum time in seconds that will pass before a TCP port that was used by a closed pinhole can be reused. Default for TCP is 2 minutes.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PortReuseHoldTimeUdp
Minimum time in seconds that will pass before a UDP port that was used by a closed pinhole can be reused. Default for UDP is 1 minute.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ResourceGroupName
The name of the resource group. The name is case insensitive.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SubscriptionId
The ID of the target subscription.
| Type: | String |
| Position: | Named |
| Default value: | (Get-AzContext).Subscription.Id |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Tag
Resource tags.
| Type: | Hashtable |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserEquipmentAddressPoolPrefix
The user equipment (UE) address pool prefixes for the attached data network from which the packet core instance will dynamically assign IP addresses to UEs.The packet core instance assigns an IP address to a UE when the UE sets up a PDU session. You must define at least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix. If you define both, they must be of the same size.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserEquipmentStaticAddressPoolPrefix
The user equipment (UE) address pool prefixes for the attached data network from which the packet core instance will assign static IP addresses to UEs.The packet core instance assigns an IP address to a UE when the UE sets up a PDU session. The static IP address for a specific UE is set in StaticIPConfiguration on the corresponding SIM resource.At least one of userEquipmentAddressPoolPrefix and userEquipmentStaticAddressPoolPrefix must be defined. If both are defined, they must be of the same size.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserPlaneDataInterfaceIpv4Address
The IPv4 address.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserPlaneDataInterfaceIpv4Gateway
The default IPv4 gateway (router).
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserPlaneDataInterfaceIpv4Subnet
The IPv4 subnet.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserPlaneDataInterfaceName
The logical name for this interface. This should match one of the interfaces configured on your Azure Stack Edge device.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Outputs
Azure PowerShell