KeepNext Class

Definition

Namespace:

DocumentFormat.OpenXml.Wordprocessing

Assembly:

DocumentFormat.OpenXml.dll

Package:

DocumentFormat.OpenXml v3.0.1

Defines the KeepNext Class.

This class is available in Office 2007 and above.

When the object is serialized out as xml, it's qualified name is w:keepNext.

public class KeepNext : DocumentFormat.OpenXml.Wordprocessing.OnOffType

type KeepNext = class
    inherit OnOffType

Public Class KeepNext
Inherits OnOffType

Inheritance

Object

OpenXmlElement

OpenXmlLeafElement

OnOffType

KeepNext

Remarks

[ISO/IEC 29500-1 1st Edition]

keepNext (Keep Paragraph With Next Paragraph)

This element specifies that when rendering this document in a paginated view, the contents of this paragraph are at least partly rendered on the same page as the following paragraph whenever possible.

This means that if the contents of the current paragraph would normally be completely rendered on a different page than the following paragraph (because only one of the two paragraphs would fit on the remaining space on the first page), then both paragraphs shall be rendered on a single page. This property can be chained between multiple paragraphs to ensure that all paragraphs are rendered on a single page without any intervening page boundaries. If this is not possible the entire set of paragraphs that are grouped together using this property would exceed a single page in any case, then the set of "keep with next" paragraphs shall start on a new page, with page breaks as needed afterwards.

If this element is omitted on a given paragraph, its value is determined by the setting previously set at any level of the style hierarchy (i.e. that previous setting remains unchanged). If this setting is never specified in the style hierarchy, then this property shall not be applied.

[Example: Consider the following document with three paragraphs:

1a9db105-ae96-4048-b75c-209b330285cc

As shown above, the second paragraph and third paragraph are being rendered on two separate pages. However, a producer can specify that the second paragraph should not be displayed without any part of the third by setting the keepNext element as follows:

<w:pPr>  
  <w:keepNext/>  
  …  
</w:pPr>  

This would ensure that the second paragraph is displayed on the same page as the third paragraph:

d3db6441-fbf0-4c61-a435-400bbc25d4c5

However, if the first paragraph was also set to keepNext, then this set of grouped paragraphs would exceed a page, therefore the set of paragraphs would be grouped and start on the first page, resulting in the second paragraph reappearing on page one:

44d780c3-c3f5-4aa9-b508-88c3f8017819

Since the paragraphs cannot all be put on one page, they all start on page one and flow as needed. end example]

Parent Elements
pPr (§17.3.1.26); pPr (§17.3.1.25); pPr (§17.7.5.2); pPr (§17.7.6.1); pPr (§17.9.23); pPr (§17.7.8.2)

This element’s content model is defined by the common boolean property definition in §17.17.4.

� ISO/IEC29500: 2008.

Constructors

KeepNext()

Initializes a new instance of the KeepNext class.

Properties

ChildElements	Gets all the child nodes of the current element. (Inherited from OpenXmlElement)
ExtendedAttributes	Gets all extended attributes (attributes not defined in the schema) of the current element. (Inherited from OpenXmlElement)
Features	Gets a IFeatureCollection for the current element. This feature collection will be read-only, but will inherit features from its parent part and package if available. (Inherited from OpenXmlElement)
FirstChild	Gets the first child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element. (Inherited from OpenXmlElement)
HasAttributes	Gets a value indicating whether the current element has any attributes. (Inherited from OpenXmlElement)
HasChildren	Gets a value that indicates whether the current element has any child elements. (Inherited from OpenXmlLeafElement)
InnerText	Gets or sets the concatenated values of the node and all of its children. (Inherited from OpenXmlElement)
InnerXml	Gets or sets the markup that only represents child elements of the current element. (Inherited from OpenXmlLeafElement)
LastChild	Gets the last child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element. (Inherited from OpenXmlElement)
LocalName	Gets the local name of the current element. (Inherited from OpenXmlElement)
MCAttributes	Gets or sets the markup compatibility attributes. Returns null if no markup compatibility attributes are defined for the current element. (Inherited from OpenXmlElement)
NamespaceDeclarations	Gets all the namespace declarations defined in the current element. Returns an empty enumerator if there is no namespace declaration. (Inherited from OpenXmlElement)
NamespaceUri	Gets the namespace URI of the current element. (Inherited from OpenXmlElement)
OpenXmlElementContext	Gets the OpenXmlElementContext of the current element. (Inherited from OpenXmlElement)
OuterXml	Gets the markup that represents the current element and all of its child elements. (Inherited from OpenXmlElement)
Parent	Gets the parent element of the current element. (Inherited from OpenXmlElement)
Prefix	Gets the namespace prefix of current element. (Inherited from OpenXmlElement)
Val	On/Off Value Represents the following attribute in the schema: w:val (Inherited from OnOffType)
XmlQualifiedName	Gets the qualified name of the current element. (Inherited from OpenXmlElement)
XName	Gets the qualified name of the current element. (Inherited from OpenXmlElement)

Methods

AddAnnotation(Object)	Adds an object to the current OpenXmlElement element's list of annotations. (Inherited from OpenXmlElement)
AddNamespaceDeclaration(String, String)	Adds a namespace declaration to the current node. (Inherited from OpenXmlElement)
Ancestors()	Enumerates all of the current element's ancestors. (Inherited from OpenXmlElement)
Ancestors<T>()	Enumerates only the current element's ancestors that have the specified type. (Inherited from OpenXmlElement)
Annotation(Type)	Get the first annotation object of the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
Annotation<T>()	Get the first annotation object of the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
Annotations(Type)	Gets a collection of annotations with the specified type for the current OpenXmlElement element. (Inherited from OpenXmlElement)
Annotations<T>()	Gets a collection of annotations with the specified type for the current OpenXmlElement element. (Inherited from OpenXmlElement)
Append(IEnumerable<OpenXmlElement>)	Appends each element from a list of elements to the end of the current element's list of child elements. (Inherited from OpenXmlElement)
Append(OpenXmlElement[])	Appends each element from an array of elements to the end of the current element's list of child elements. (Inherited from OpenXmlElement)
AppendChild<T>(T)	Appends the specified element to the end of the current element's list of child nodes. (Inherited from OpenXmlElement)
ClearAllAttributes()	Clears all of the attributes, including both known attributes and extended attributes. (Inherited from OpenXmlElement)
Clone()	Creates a duplicate of the current node. (Inherited from OpenXmlElement)
CloneNode(Boolean)	Creates a duplicate of this node.
Descendants()	Enumerates all of the current element's descendants. (Inherited from OpenXmlElement)
Descendants<T>()	Enumerate all of the current element's descendants of type T. (Inherited from OpenXmlElement)
Elements()	Enumerates all of the current element's children. (Inherited from OpenXmlElement)
Elements<T>()	Enumerates only the current element's children that have the specified type. (Inherited from OpenXmlElement)
ElementsAfter()	Enumerates all of the sibling elements that follow the current element and have the same parent as the current element. (Inherited from OpenXmlElement)
ElementsBefore()	Enumerates all of the sibling elements that precede the current element and have the same parent as the current element. (Inherited from OpenXmlElement)
GetAttribute(String, String)	Gets an Open XML attribute with the specified tag name and namespace URI. (Inherited from OpenXmlElement)
GetAttributes()	Gets a list that contains a copy of all the attributes. (Inherited from OpenXmlElement)
GetEnumerator()	Returns an enumerator that iterates through the child collection. (Inherited from OpenXmlElement)
GetFirstChild<T>()	Finds the first child element in type T. (Inherited from OpenXmlElement)
InsertAfter<T>(T, OpenXmlElement)	Inserts the specified element immediately after the specified reference element. (Inherited from OpenXmlElement)
InsertAfterSelf<T>(T)	Inserts the specified element immediately after the current element. (Inherited from OpenXmlElement)
InsertAt<T>(T, Int32)	Inserts the specified element at the specified index in the current element's list of child elements. (Inherited from OpenXmlElement)
InsertBefore<T>(T, OpenXmlElement)	Inserts the specified element immediately before the specified reference element. (Inherited from OpenXmlElement)
InsertBeforeSelf<T>(T)	Inserts the specified element immediately before the current element. (Inherited from OpenXmlElement)
IsAfter(OpenXmlElement)	Determines if the current element appears after a specified element in document order. (Inherited from OpenXmlElement)
IsBefore(OpenXmlElement)	Determines if the current element appears before a specified element in document order. (Inherited from OpenXmlElement)
LookupNamespace(String)	Resolves the namespace prefix in the context of the current node. (Inherited from OpenXmlElement)
LookupPrefix(String)	Finds the corresponding prefix for a namespace uri in the current element scope. (Inherited from OpenXmlElement)
NextSibling()	Gets the OpenXmlElement element that immediately follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement element. (Inherited from OpenXmlElement)
NextSibling<T>()	Gets the OpenXmlElement element with the specified type that follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement. (Inherited from OpenXmlElement)
PrependChild<T>(T)	Inserts the specified element at the beginning of the current element's list of child elements. (Inherited from OpenXmlElement)
PreviousSibling()	Gets the OpenXmlElement element that immediately precedes the current OpenXmlElement element. Returns null (Nothing in Visual Basic ) if there is no preceding OpenXmlElement element. (Inherited from OpenXmlElement)
PreviousSibling<T>()	Gets the OpenXmlElement element with the specified type that precedes the current OpenXmlElement. Returns null (Nothing in Visual Basic) if there is no preceding OpenXmlElement element. (Inherited from OpenXmlElement)
Remove()	Removes the current element from its parent. (Inherited from OpenXmlElement)
RemoveAllChildren()	Removes all child elements of the current element. (Inherited from OpenXmlLeafElement)
RemoveAllChildren<T>()	Remove all of the current element's child elements that are of type T. (Inherited from OpenXmlElement)
RemoveAnnotations(Type)	Removes the annotations of the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
RemoveAnnotations<T>()	Removes the annotations with the specified type from the current OpenXmlElement element. (Inherited from OpenXmlElement)
RemoveAttribute(String, String)	Removes the attribute from the current element. (Inherited from OpenXmlElement)
RemoveChild<T>(T)	Removes the specified child element from the current element's list of child elements. (Inherited from OpenXmlElement)
RemoveNamespaceDeclaration(String)	Removes the namespace declaration for the specified prefix. Removes nothing if there is no prefix. (Inherited from OpenXmlElement)
ReplaceChild<T>(OpenXmlElement, T)	Replaces a child element with another child element in the current element's list of child elements. (Inherited from OpenXmlElement)
SetAttribute(OpenXmlAttribute)	Sets an attribute to the specified element. If the attribute is a known attribute, the value of the attribute is set. If the attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list. (Inherited from OpenXmlElement)
SetAttributes(IEnumerable<OpenXmlAttribute>)	Sets a number of attributes to the element. If an attribute is a known attribute, the value of the attribute is set. If an attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list. (Inherited from OpenXmlElement)
WriteTo(XmlWriter)	Saves the current node to the specified XmlWriter. (Inherited from OpenXmlElement)

Explicit Interface Implementations

IEnumerable.GetEnumerator()	(Inherited from OpenXmlElement)
IEnumerable<OpenXmlElement>.GetEnumerator()	Returns an enumerator that iterates through the child collection. (Inherited from OpenXmlElement)