다음을 통해 공유

az arcdata dc config

  • Reference

Note

This reference is part of the arcdata extension for the Azure CLI (version 2.3.1 or higher). The extension will automatically install the first time you run an az arcdata dc config command. Learn more about extensions.

Configuration commands.

Commands

Name Description Type Status
az arcdata dc config add

Add a value for a json path in a config file.

 Extension GA
az arcdata dc config init

Initialize a data controller configuration profile that can be used with az arcdata dc create.

 Extension GA
az arcdata dc config list

List available configuration profile choices.

 Extension GA
az arcdata dc config patch

Patch a config file based on a json patch file.

 Extension GA
az arcdata dc config remove

Remove a value for a json path in a config file.

 Extension GA
az arcdata dc config replace

Replace a value for a json path in a config file.

 Extension GA
az arcdata dc config show

Return the config of the data controller custom resource.

 Extension GA

az arcdata dc config add

Add a value for a json path in a config file.

Add the value at the json path in the config file. All examples below are given in Bash. If using another command line, you may need to escapequotations appropriately. Alternatively, you may use the patch file functionality.

az arcdata dc config add --config-file
                         --json-values
                         --path

Examples

Add data controller storage.

az arcdata dc config add --path custom/control.json --json-values 'spec.storage={"accessMode":"ReadWriteOnce","className":"managed-premium","size":"10Gi"}'

Required Parameters

--config-file -c
Deprecated

Option '-c' has been deprecated and will be removed in a future release. Use '-p' instead.

Data controller config file path of the config you would like to set, i.e. custom/control.json.

--json-values -j

A key value pair list of json paths to values: key1.subkey1=value1,key2.subkey2=value2. You may provide inline json values such as: key='{"kind":"cluster","name":"test-cluster"}' or provide a file path, such as key=./values.json. The add command does NOT support conditionals. If the inline value you are providing is a key value pair itself with "=" and "," escape those characters. For example, key1="key2=val2,key3=val3". See http://jsonpatch.com/ for examples of how your path should look. If you would like to access an array, you must do so by indicating the index, such as key.0=value.

--path -p

Data controller config file path of the config you would like to set, i.e. custom/control.json.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az arcdata dc config init

Initialize a data controller configuration profile that can be used with az arcdata dc create.

Initialize a data controller configuration profile that can be used with az arcdata dc create. The specific source of the configuration profile can be specified in the arguments.

az arcdata dc config init [--force]
                          [--path]
                          [--source]
                          [--target]

Examples

Guided data controller config init experience - you will receive prompts for needed values.

az arcdata dc config init

arcdata dc config init with arguments, creates a configuration profile of aks-dev-test in ./custom.

az arcdata dc config init --source azure-arc-kubeadm --path custom

Optional Parameters

--force -f

Force overwrite of the target file.

--path -p

File path of where you would like the config profile placed, defaults to /custom.

--source -s

Config profile source: ['azure-arc-ake', 'azure-arc-aks-default-storage', 'azure-arc-aks-dev-test', 'azure-arc-aks-hci', 'azure-arc-aks-premium-storage', 'azure-arc-azure-openshift', 'azure-arc-eks', 'azure-arc-gke', 'azure-arc-kubeadm', 'azure-arc-kubeadm-dev-test', 'azure-arc-openshift', 'azure-arc-unit-test'].

--target -t
Deprecated

Option '-t' has been deprecated and will be removed in a future release. Use '-p' instead.

File path of where you would like the config profile placed, defaults to /custom.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az arcdata dc config list

List available configuration profile choices.

List available configuration profile choices for use in arcdata dc config init.

az arcdata dc config list [--config-profile]

Examples

Shows all available configuration profile names.

az arcdata dc config list

Shows json of a specific configuration profile.

az arcdata dc config list --config-profile aks-dev-test

Optional Parameters

--config-profile -c

Default config profile: ['azure-arc-ake', 'azure-arc-aks-default-storage', 'azure-arc-aks-dev-test', 'azure-arc-aks-hci', 'azure-arc-aks-premium-storage', 'azure-arc-azure-openshift', 'azure-arc-eks', 'azure-arc-gke', 'azure-arc-kubeadm', 'azure-arc-kubeadm-dev-test', 'azure-arc-openshift', 'azure-arc-unit-test'].

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az arcdata dc config patch

Patch a config file based on a json patch file.

Patch the config file according to the given patch file. Consult http://jsonpatch.com/ for a better understanding of how the paths should be composed. The replace operation can use conditionals in its path due to the jsonpath library https://jsonpath.com/. All patch json files must start with a key of "patch" that has an array of patches with their corresponding op (add, replace, remove), path, and value. The "remove" op does not require a value, just a path. See the examples below.

az arcdata dc config patch --config-file
                           --patch-file
                           --path

Examples

Ex 1 - Replace the port of a single endpoint (Data Controller Endpoint) with patch file.

az arcdata dc config patch --path custom/control.json --patch ./patch.json

    Patch File Example (patch.json):
        {"patch":[{"op":"replace","path":"$.spec.endpoints[?(@.name=='Controller')].port","value":30080}]}

Ex 2 - Replace data controller storage with patch file.

az arcdata dc config patch --path custom/control.json --patch ./patch.json

    Patch File Example (patch.json):
        {"patch":[{"op":"replace","path":".spec.storage","value":{"accessMode":"ReadWriteMany","className":"managed-premium","size":"10Gi"}}]}

Required Parameters

--config-file -c
Deprecated

Option '-c' has been deprecated and will be removed in a future release. Use '--path' instead.

Data controller config file path of the config you would like to set, i.e. custom/control.json.

--patch-file -p

Path to a patch json file that is based off the jsonpatch library: http://jsonpatch.com/. You must start your patch json file with a key called "patch", whose value is an array of patch operations you intend to make. For the path of a patch operation, you may use dot notation, such as key1.key2 for most operations. If you would like to do a replace operation, and you are replacing a value in an array that requires a conditional, please use the jsonpath notation by beginning your path with a $. This will allow you to do a conditional such as $.key1.key2[?(@.key3=="someValue"].key4. See the examples below. For additional help with conditionals, See: https://jsonpath.com/.

--path

Data controller config file path of the config you would like to set, i.e. custom/control.json.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az arcdata dc config remove

Remove a value for a json path in a config file.

Remove the value at the json path in the config file. All examples below are given in Bash. If using another command line, you may need to escapequotations appropriately. Alternatively, you may use the patch file functionality.

az arcdata dc config remove --config-file
                            --json-path
                            --path

Examples

Ex 1 - Remove data controller storage.

az arcdata dc config remove --path custom/control.json --json-path '.spec.storage'

Required Parameters

--config-file -c
Deprecated

Option '-c' has been deprecated and will be removed in a future release. Use '-p' instead.

Data controller config file path of the config you would like to set, i.e. custom/control.json.

--json-path -j

A list of json paths based on the jsonpatch library that indicates which values you would like removed, such as: key1.subkey1,key2.subkey2. The remove command does NOT support conditionals. See http://jsonpatch.com/ for examples of how your path should look. If you would like to access an array, you must do so by indicating the index, such as key.0=value.

--path -p

Data controller config file path of the config you would like to set, i.e. custom/control.json.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az arcdata dc config replace

Replace a value for a json path in a config file.

Replace the value at the json path in the config file. All examplesbelow are given in Bash. If using another command line, you may need to escapequotations appropriately. Alternatively, you may use the patch file functionality.

az arcdata dc config replace --config-file
                             --json-values
                             --path

Examples

Ex 1 - Replace the port of a single endpoint (Data Controller Endpoint).

az arcdata dc config replace --path custom/control.json --json-values '$.spec.endpoints[?(@.name=="Controller")].port=30080'

Ex 2 - Replace data controller storage.

az arcdata dc config replace --path custom/control.json --json-values 'spec.storage={"accessMode":"ReadWriteOnce","className":"managed-premium","size":"10Gi"}'

Required Parameters

--config-file -c
Deprecated

Option '-c' has been deprecated and will be removed in a future release. Use '-p' instead.

Data controller config file path of the config you would like to set, i.e. custom/control.json.

--json-values -j

A key value pair list of json paths to values: key1.subkey1=value1,key2.subkey2=value2. You may provide inline json values such as: key='{"kind":"cluster","name":"test-cluster"}' or provide a file path, such as key=./values.json. The replace command supports conditionals through the jsonpath library. To use this, start your path with a $. This will allow you to do a conditional such as -j $.key1.key2[?(@.key3=="someValue"].key4=value. If the inline value you are providing is a key value pair itself with "=" and "," escape those characters. For example, key1="key2=val2,key3=val3". You may see examples below. For additional help, See: https://jsonpath.com/.

--path -p

Data controller config file path of the config you would like to set, i.e. custom/control.json.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az arcdata dc config show

Return the config of the data controller custom resource.

az arcdata dc config show [--k8s-namespace]
                          [--use-k8s]

Optional Parameters

--k8s-namespace -k

The Kubernetes namespace in which the data controller exists.

--use-k8s

Use local Kubernetes APIs to perform this action.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.