다음을 통해 공유

Azure Monitor의 로그 검색 경고 규칙에 대한 Resource Manager 템플릿 샘플

  • 아티클

이 문서에는 Azure Monitor에서 로그 검색 경로를 만들고 구성하기 위한 Azure Resource Manager 템플릿 샘플이 포함되어 있습니다. 각 샘플에는 템플릿 파일과 템플릿에 제공할 샘플 값이 포함된 매개 변수 파일이 포함되어 있습니다.

참고 항목

사용 가능한 샘플 목록과 Azure 구독에 배포하는 방법에 대한 지침은 Azure Monitor에 대한 Azure Resource Manager 샘플을 참조하세요.

참고 항목

로그 경고 규칙 속성의 모든 데이터를 합친 크기는 64KB를 초과할 수 없습니다. 이는 차원이 너무 많거나, 쿼리가 너무 크거나, 작업 그룹이 너무 많거나, 설명이 긴 경우에 발생할 수 있습니다. 대규모 경고 규칙을 만들 때 이러한 영역을 최적화하는 것을 잊지 마세요.

모든 리소스 종류에 대한 템플릿(버전 2021-08-01)

다음 샘플에서는 모든 리소스를 대상으로 지정할 수 있는 규칙을 만듭니다.

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Location of the alert')
@minLength(1)
param location string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Specifies whether the alert will automatically resolve')
param autoMitigate bool = true

@description('Specifies whether to check linked storage and fail creation if the storage was not found')
param checkWorkspaceAlertsStorageConfigured bool = false

@description('Full Resource ID of the resource emitting the metric that will be used for the comparison. For example /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroups/ResourceGroupName/providers/Microsoft.compute/virtualMachines/VM_xyz')
@minLength(1)
param resourceId string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param query string

@description('Name of the measure column used in the alert evaluation.')
param metricMeasureColumn string

@description('Name of the resource ID column used in the alert targeting the alerts.')
param resourceIdColumn string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'Equals'
  'GreaterThan'
  'GreaterThanOrEqual'
  'LessThan'
  'LessThanOrEqual'
])
param operator string = 'GreaterThan'

@description('The threshold value at which the alert is activated.')
param threshold int = 0

@description('The number of periods to check in the alert evaluation.')
param numberOfEvaluationPeriods int = 1

@description('The number of unhealthy periods to alert on (must be lower or equal to numberOfEvaluationPeriods).')
param minFailingPeriodsToAlert int = 1

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT10M'
  'PT15M'
  'PT30M'
  'PT45M'
  'PT1H'
  'PT2H'
  'PT3H'
  'PT4H'
  'PT5H'
  'PT6H'
  'PT24H'
  'PT48H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT5M'

@description('Mute actions for the chosen period of time (in ISO 8601 duration format) after the alert is fired.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param muteActionsDuration string

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource alert 'Microsoft.Insights/scheduledQueryRules@2021-08-01' = {
  name: alertName
  location: location
  tags: {}
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      allOf: [
        {
          query: query
          metricMeasureColumn: metricMeasureColumn
          resourceIdColumn: resourceIdColumn
          dimensions: []
          operator: operator
          threshold: threshold
          timeAggregation: timeAggregation
          failingPeriods: {
            numberOfEvaluationPeriods: numberOfEvaluationPeriods
            minFailingPeriodsToAlert: minFailingPeriodsToAlert
          }
        }
      ]
    }
    muteActionsDuration: muteActionsDuration
    autoMitigate: autoMitigate
    checkWorkspaceAlertsStorageConfigured: checkWorkspaceAlertsStorageConfigured
    actions: {
      actionGroups: [
         actionGroupId
      ]
      customProperties: {
        key1: 'value1'
        key2: 'value2'
      }
    }
  }
}

매개 변수 파일

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New Alert"
    },
    "location": {
      "value": "eastus"
    },
    "alertDescription": {
      "value": "New alert created via template"
    },
    "alertSeverity": {
      "value":3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourceGroup-name/providers/Microsoft.Compute/virtualMachines/replace-with-resource-name"
    },
    "query": {
      "value": "Perf | where ObjectName == \"Processor\" and CounterName == \"% Processor Time\""
    },
    "metricMeasureColumn": {
      "value": "AggregatedValue"
    },
    "operator": {
      "value": "GreaterThan"
    },
    "threshold": {
      "value": 80
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group"
    }
  }
}

결과 템플릿 수(버전 2018-04-16까지)

다음 샘플에서는 결과 수 경고 규칙을 만듭니다.

주의

  • 이 샘플에는 웹후크 페이로드가 포함되어 있습니다. 경고 규칙에서 웹후크를 트리거하지 않아야 하는 경우 customWebhookPayload 요소를 제거합니다.

템플릿 파일

@description('Resource ID of the Log Analytics workspace.')
param sourceId string = ''

@description('Location for the alert. Must be the same location as the workspace.')
param location string = ''

@description('The ID of the action group that is triggered when the alert is activated.')
param actionGroupId string = ''

resource logQueryAlert 'Microsoft.Insights/scheduledQueryRules@2018-04-16' = {
  name: 'Sample log query alert'
  location: location
  properties: {
    description: 'Sample log query alert'
    enabled: 'true'
    source: {
      query: 'Event | where EventLevelName == "Error" | summarize count() by Computer'
      dataSourceId: sourceId
      queryType: 'ResultCount'
    }
    schedule: {
      frequencyInMinutes: 15
      timeWindowInMinutes: 60
    }
    action: {
      'odata.type': 'Microsoft.WindowsAzure.Management.Monitoring.Alerts.Models.Microsoft.AppInsights.Nexus.DataContracts.Resources.ScheduledQueryRules.AlertingAction'
      severity: '4'
      aznsAction: {
        actionGroup: array(actionGroupId)
        emailSubject: 'Alert mail subject'
        customWebhookPayload: '{ "alertname":"#alertrulename", "IncludeSearchResults":true }'
      }
      trigger: {
        thresholdOperator: 'GreaterThan'
        threshold: 1
      }
    }
  }
}

매개 변수 파일

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "sourceId": {
      "value": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourcegroups/bw-samples-arm/providers/microsoft.operationalinsights/workspaces/bw-arm-01"
    },
    "location": {
      "value": "westus"
    },
    "actionGroupId": {
      "value": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourceGroups/bw-samples-arm/providers/microsoft.insights/actionGroups/ARM samples group 01"
    }
  }
}

메트릭 측정 템플릿(버전 2018-04-16까지)

다음 샘플에서는 메트릭 측정 경고 규칙을 만듭니다.

템플릿 파일

@description('Resource ID of the Log Analytics workspace.')
param sourceId string = ''

@description('Location for the alert. Must be the same location as the workspace.')
param location string = ''

@description('The ID of the action group that is triggered when the alert is activated.')
param actionGroupId string = ''

resource metricMeasurementLogQueryAlert 'Microsoft.Insights/scheduledQueryRules@2018-04-16' = {
  name: 'Sample metric measurement log query alert'
  location: location
  properties: {
    description: 'Sample metric measurement query alert rule'
    enabled: 'true'
    source: {
      query: 'Event | where EventLevelName == "Error" | summarize AggregatedValue = count() by bin(TimeGenerated,1h), Computer'
      dataSourceId: sourceId
      queryType: 'ResultCount'
    }
    schedule: {
      frequencyInMinutes: 15
      timeWindowInMinutes: 60
    }
    action: {
      'odata.type': 'Microsoft.WindowsAzure.Management.Monitoring.Alerts.Models.Microsoft.AppInsights.Nexus.DataContracts.Resources.ScheduledQueryRules.AlertingAction'
      severity: '4'
      aznsAction: {
        actionGroup: array(actionGroupId)
        emailSubject: 'Alert mail subject'
      }
      trigger: {
        thresholdOperator: 'GreaterThan'
        threshold: 10
        metricTrigger: {
          thresholdOperator: 'Equal'
          threshold: 1
          metricTriggerType: 'Consecutive'
          metricColumn: 'Computer'
        }
      }
    }
  }
}

매개 변수 파일

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "sourceId": {
      "value": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourcegroups/bw-samples-arm/providers/microsoft.operationalinsights/workspaces/bw-arm-01"
    },
    "location": {
      "value": "westus"
    },
    "actionGroupId": {
      "value": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/resourceGroups/bw-samples-arm/providers/microsoft.insights/actionGroups/ARM samples group 01"
    }
  }
}

다음 단계