다음을 통해 공유

AKS(Azure Kubernetes Service)에서 Valkey 클러스터 구성 및 배포

  • 아티클

이 문서에서는 AKS(Azure Kubernetes Service)에서 Valkey 클러스터를 구성하고 배포합니다.

참고 항목

이 문서에는 Microsoft에서 더 이상 사용하지 않는 용어인 마스터 및 슬레이브 용어에 대한 참조가 포함되어 있습니다. 이 용어가 Valkey 소프트웨어에서 제거되면 이 문서에서 제거하겠습니다.

네임스페이스 만들기

  1. 명령을 사용하여 Valkey 클러스터에 대한 네임스페이스를 만듭니다 kubectl create namespace .

    kubectl create namespace ${SERVICE_ACCOUNT_NAMESPACE} --dry-run=client --output yaml | kubectl apply -f -

    예제 출력:

    namespace/valkey created

비밀 만들기

  1. openssl을 사용하여 Valkey 클러스터에 대한 임의의 암호를 생성하고 명령을 사용하여 Azure Key Vault에 az keyvault secret set 저장합니다. 사용자가 할당한 ID가 명령을 사용하여 az keyvault set-policy 비밀을 가져올 수 있도록 정책을 설정합니다.

    SECRET=$(openssl rand -base64 32)
echo requirepass $SECRET > /tmp/valkey-password-file.conf
echo primaryauth $SECRET >> /tmp/valkey-password-file.conf
az keyvault secret set --vault-name $MY_KEYVAULT_NAME --name valkey-password-file --file /tmp/valkey-password-file.conf --output table
rm /tmp/valkey-password-file.conf
az keyvault set-policy --name $MY_KEYVAULT_NAME --object-id $userAssignedObjectID --secret-permissions get --output table

  2. SecretProviderClass 명령을 사용하여 키 자격 증명 모음에 저장된 Valkey 암호에 액세스하는 리소스를 만듭니다kubectl apply.

    kubectl apply -f - <<EOF
---
apiVersion: secrets-store.csi.x-k8s.io/v1
kind: SecretProviderClass
metadata:
  name: valkey-password
  namespace: valkey
spec:
  provider: azure
  parameters:
    usePodIdentity: "false"
    useVMManagedIdentity: "true"
    userAssignedIdentityID: "${userAssignedIdentityID}"
    keyvaultName: ${MY_KEYVAULT_NAME}              # the name of the AKV instance
    objects: |
      array:
        - |
          objectName: valkey-password-file
          objectAlias: valkey-password-file.conf
          objectType: secret
    tenantId: "${TENANT_ID}" # the tenant ID of the AKV instance
EOF

Valkey 클러스터 배포

  1. ConfigMap 명령을 사용하여 Valkey StatefulSet 클러스터를 구성하는 데 사용할 볼륨으로 탑재된 kubectl apply 파일을 만듭니다.

    kubectl apply -f - <<EOF
apiVersion: v1
kind: ConfigMap
metadata:
  name: valkey-cluster
  namespace: valkey
data:
  valkey.conf:  |+
    cluster-enabled yes
    cluster-node-timeout 15000
    cluster-config-file /data/nodes.conf
    appendonly yes
    protected-mode yes
    dir /data
    port 6379
    include /etc/valkey-password/valkey-password-file.conf
EOF

    예제 출력:

    configmap/valkey-cluster created

  2. StatefulSet 목표를 가진 spec.affinity 리소스를 만드는 것은 명령을 사용하여 kubectl apply 영역 1 및 영역 2의 모든 주 복제본을 다른 노드에 유지하는 것입니다.

    kubectl apply -f - <<EOF
---
apiVersion: apps/v1
kind: StatefulSet
metadata:
  name: valkey-masters
  namespace: valkey
spec:
  serviceName: "valkey-masters"
  replicas: 3
  selector:
    matchLabels:
      app: valkey
  template:
    metadata:
      labels:
        app: valkey
        appCluster: valkey-masters
    spec:
      terminationGracePeriodSeconds: 20
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
            - matchExpressions:
              - key: agentpool
                operator: In
                values:
                - valkey
              - key: topology.kubernetes.io/zone
                operator: In
                values:
                - ${MY_LOCATION}-1
            - matchExpressions:
              - key: agentpool
                operator: In
                values:
                - valkey
              - key: topology.kubernetes.io/zone
                operator: In
                values:
                - ${MY_LOCATION}-2
        podAntiAffinity:
          preferredDuringSchedulingIgnoredDuringExecution:
          - weight: 90
            podAffinityTerm:
              labelSelector:
                matchExpressions:
                - key: app
                  operator: In
                  values:
                  - valkey
              topologyKey: topology.kubernetes.io/zone
          - weight: 90
            podAffinityTerm:
              labelSelector:
                matchExpressions:
                - key: app
                  operator: In
                  values:
                  - valkey
              topologyKey: kubernetes.io/hostname
      containers:
      - name: valkey
        image: "${MY_ACR_REGISTRY}.azurecr.io/valkey:latest"
        env:
        - name: VALKEY_PASSWORD_FILE
          value: "/etc/valkey-password/valkey-password-file.conf"
        - name: MY_POD_IP
          valueFrom:
            fieldRef:
              fieldPath: status.podIP
        command:
          - "valkey-server"
        args:
          - "/conf/valkey.conf"
          - "--cluster-announce-ip"
          - "\$(MY_POD_IP)"
        resources:
          requests:
            cpu: "100m"
            memory: "100Mi"
        ports:
            - name: valkey
              containerPort: 6379
              protocol: "TCP"
            - name: cluster
              containerPort: 16379
              protocol: "TCP"
        volumeMounts:
        - name: conf
          mountPath: /conf
          readOnly: false
        - name: data
          mountPath: /data
          readOnly: false
        - name: valkey-password
          mountPath: /etc/valkey-password
          readOnly: true
      volumes:
      - name: valkey-password
        csi:
          driver: secrets-store.csi.k8s.io
          readOnly: true
          volumeAttributes:
            secretProviderClass: valkey-password
      - name: conf
        configMap:
          name: valkey-cluster
          defaultMode: 0755
  volumeClaimTemplates:
  - metadata:
      name: data
    spec:
      accessModes: [ "ReadWriteOnce" ]
      storageClassName: managed-csi-premium
      resources:
        requests:
          storage: 20Gi
EOF

    예제 출력:

    statefulset.apps/valkey-masters created

  3. 명령을 사용하여 영역 3의 모든 복제본을 다른 노드에 유지하는 것을 목표로 Valkey 보조 spec.affinity 복제본에 대한 두 번째 StatefulSet 리소스를 kubectl apply 만듭니다.

    kubectl apply -f - <<EOF
---
apiVersion: apps/v1
kind: StatefulSet
metadata:
  name: valkey-replicas
  namespace: valkey
spec:
  serviceName: "valkey-replicas"
  replicas: 3
  selector:
    matchLabels:
      app: valkey
  template:
    metadata:
      labels:
        app: valkey
        appCluster: valkey-replicas
    spec:
      terminationGracePeriodSeconds: 20
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
            - matchExpressions:
              - key: agentpool
                operator: In
                values:
                - valkey
              - key: topology.kubernetes.io/zone
                operator: In
                values:
                - ${MY_LOCATION}-3
        podAntiAffinity:
          preferredDuringSchedulingIgnoredDuringExecution:
          - weight: 90
            podAffinityTerm:
              labelSelector:
                matchExpressions:
                - key: app
                  operator: In
                  values:
                  - valkey
              topologyKey: kubernetes.io/hostname
      containers:
      - name: valkey
        image: "${MY_ACR_REGISTRY}.azurecr.io/valkey:latest"
        env:
        - name: VALKEY_PASSWORD_FILE
          value: "/etc/valkey-password/valkey-password-file.conf"
        - name: MY_POD_IP
          valueFrom:
            fieldRef:
              fieldPath: status.podIP
        command:
          - "valkey-server"
        args:
          - "/conf/valkey.conf"
          - "--cluster-announce-ip"
          - "\$(MY_POD_IP)"
        resources:
          requests:
            cpu: "100m"
            memory: "100Mi"
        ports:
            - name: valkey
              containerPort: 6379
              protocol: "TCP"
            - name: cluster
              containerPort: 16379
              protocol: "TCP"
        volumeMounts:
        - name: conf
          mountPath: /conf
          readOnly: false
        - name: data
          mountPath: /data
          readOnly: false
        - name: valkey-password
          mountPath: /etc/valkey-password
          readOnly: true
      volumes:
      - name: valkey-password
        csi:
          driver: secrets-store.csi.k8s.io
          readOnly: true
          volumeAttributes:
            secretProviderClass: valkey-password
      - name: conf
        configMap:
          name: valkey-cluster
          defaultMode: 0755
  volumeClaimTemplates:
  - metadata:
      name: data
    spec:
      accessModes: [ "ReadWriteOnce" ]
      storageClassName: managed-csi-premium
      resources:
        requests:
          storage: 20Gi
EOF

    예제 출력:

    statefulset.apps/valkey-replicas created

  4. 명령과 replica-N 명령을 사용하여 kubectl get pods kubectl get nodes 다른 노드 및 영역에서 실행되고 있는지 master-N 확인합니다.

    kubectl get pods -n valkey -o wide
kubectl get node -o custom-columns=Name:.metadata.name,Zone:".metadata.labels.topology\.kubernetes\.io/zone"

    예제 출력:

    NAME                READY   STATUS    RESTARTS   AGE     IP             NODE                             NOMINATED NODE   READINESS GATES
valkey-masters-0    1/1     Running   0          2m55s   10.224.0.4     aks-valkey-18693609-vmss000004   <none>           <none>
valkey-masters-1    1/1     Running   0          2m31s   10.224.0.137   aks-valkey-18693609-vmss000000   <none>           <none>
valkey-masters-2    1/1     Running   0          2m7s    10.224.0.222   aks-valkey-18693609-vmss000001   <none>           <none>
valkey-replicas-0   1/1     Running   0          88s     10.224.0.237   aks-valkey-18693609-vmss000005   <none>           <none>
valkey-replicas-1   1/1     Running   0          70s     10.224.0.18    aks-valkey-18693609-vmss000002   <none>           <none>
valkey-replicas-2   1/1     Running   0          48s     10.224.0.242   aks-valkey-18693609-vmss000005   <none>           <none>
Name                                Zone
aks-nodepool1-17621399-vmss000000   centralus-1
aks-nodepool1-17621399-vmss000001   centralus-2
aks-nodepool1-17621399-vmss000003   centralus-3
aks-valkey-18693609-vmss000000      centralus-1
aks-valkey-18693609-vmss000001      centralus-2
aks-valkey-18693609-vmss000002      centralus-3
aks-valkey-18693609-vmss000003      centralus-1
aks-valkey-18693609-vmss000004      centralus-2
aks-valkey-18693609-vmss000005      centralus-3

    다음 단계로 진행하기 전에 모든 Pod가 실행될 때까지 기다립니다.

  5. 명령을 사용하여 kubectl apply Valkey Pod의 IP 주소를 가져오는 데 사용할 헤드리스 Service 리소스 3개(전체 클러스터에 대한 첫 번째 리소스, 주 복제본에 대한 두 번째 리소스, 보조 리소스에 대한 세 번째 리소스)를 만듭니다.

    kubectl apply -f - <<EOF
apiVersion: v1
kind: Service
metadata:
  name: valkey-cluster
  namespace: valkey
spec:
  clusterIP: None
  ports:
  - name: valkey-port
    port: 6379
    protocol: TCP
    targetPort: 6379
  selector:
    app: valkey
  sessionAffinity: None
  type: ClusterIP
EOF

kubectl apply -f - <<EOF
apiVersion: v1
kind: Service
metadata:
  name: valkey-masters
  namespace: valkey
spec:
  clusterIP: None
  ports:
  - name: valkey-port
    port: 6379
    protocol: TCP
    targetPort: 6379
  selector:
    app: valkey
    appCluster: valkey-masters
  sessionAffinity: None
  type: ClusterIP
EOF

kubectl apply -f - <<EOF
apiVersion: v1
kind: Service
metadata:
  name: valkey-replicas
  namespace: valkey
spec:
  clusterIP: None
  ports:
  - name: valkey-port
    port: 6379
    protocol: TCP
    targetPort: 6379
  selector:
    app: valkey
    appCluster: valkey-replicas
  sessionAffinity: None
  type: ClusterIP
EOF

    예제 출력:

    service/valkey-cluster created
service/valkey-masters created
service/valkey-replicas created

Valkey 클러스터 실행

  1. 명령을 사용하여 영역 1과 2의 Valkey 주 복제본을 클러스터에 kubectl exec 추가합니다.

    kubectl exec -it -n valkey valkey-masters-0 -- valkey-cli --cluster create --cluster-yes --cluster-replicas 0 \
                    valkey-masters-0.valkey-masters.valkey.svc.cluster.local:6379 \
                    valkey-masters-1.valkey-masters.valkey.svc.cluster.local:6379 \
                    valkey-masters-2.valkey-masters.valkey.svc.cluster.local:6379 \
                    --pass ${SECRET}

    예제 출력:

    >>> Performing hash slots allocation on 3 nodes...
Master[0] -> Slots 0 - 5460
Master[1] -> Slots 5461 - 10922
Master[2] -> Slots 10923 - 16383
M: ee6ac1d00d3f016b6f46c7ce11199bc1a7809a35 valkey-masters-0.valkey-masters.valkey.svc.cluster.local:6379
   slots:[0-5460] (5461 slots) master
M: fd1fb98db83976478e05edd3d2a02f9a13badd80 valkey-masters-1.valkey-masters.valkey.svc.cluster.local:6379
   slots:[5461-10922] (5462 slots) master
M: ea47bf57ae7080ef03164a4d48b662c7b4c8770e valkey-masters-2.valkey-masters.valkey.svc.cluster.local:6379
   slots:[10923-16383] (5461 slots) master
>>> Nodes configuration updated
>>> Assign a different config epoch to each node
>>> Sending CLUSTER MEET messages to join the cluster
Waiting for the cluster to join
...
>>> Performing Cluster Check (using node valkey-masters-0.valkey-masters.valkey.svc.cluster.local:6379)
M: ee6ac1d00d3f016b6f46c7ce11199bc1a7809a35 valkey-masters-0.valkey-masters.valkey.svc.cluster.local:6379
   slots:[0-5460] (5461 slots) master
M: ea47bf57ae7080ef03164a4d48b662c7b4c8770e 10.224.0.176:6379
   slots:[10923-16383] (5461 slots) master
M: fd1fb98db83976478e05edd3d2a02f9a13badd80 10.224.0.247:6379
   slots:[5461-10922] (5462 slots) master
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.

  2. 명령을 사용하여 영역 3의 Valkey 복제본을 클러스터에 추가합니다 kubectl exec .

    kubectl exec -ti -n valkey valkey-masters-0 -- valkey-cli --cluster add-node \
                    valkey-replicas-0.valkey-replicas.valkey.svc.cluster.local:6379 \
                    valkey-masters-0.valkey-masters.valkey.svc.cluster.local:6379  --cluster-slave \
                    --pass ${SECRET}

kubectl exec -ti -n valkey valkey-masters-0 -- valkey-cli --cluster add-node \
                    valkey-replicas-1.valkey-replicas.valkey.svc.cluster.local:6379 \
                    valkey-masters-1.valkey-masters.valkey.svc.cluster.local:6379  --cluster-slave \
                    --pass ${SECRET}

kubectl exec -ti -n valkey valkey-masters-0 -- valkey-cli --cluster add-node \
                    valkey-replicas-2.valkey-replicas.valkey.svc.cluster.local:6379 \
                    valkey-masters-2.valkey-masters.valkey.svc.cluster.local:6379  --cluster-slave \
                    --pass ${SECRET}

    예제 출력:

    >>> Adding node valkey-replicas-0.valkey-replicas.valkey.svc.cluster.local:6379 to cluster valkey-masters-0.valkey-masters.valkey.svc.cluster.local:6379
>>> Performing Cluster Check (using node valkey-masters-0.valkey-masters.valkey.svc.cluster.local:6379)
M: ee6ac1d00d3f016b6f46c7ce11199bc1a7809a35 valkey-masters-0.valkey-masters.valkey.svc.cluster.local:6379
   slots:[0-5460] (5461 slots) master
M: ea47bf57ae7080ef03164a4d48b662c7b4c8770e 10.224.0.176:6379
   slots:[10923-16383] (5461 slots) master
M: fd1fb98db83976478e05edd3d2a02f9a13badd80 10.224.0.247:6379
   slots:[5461-10922] (5462 slots) master
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.
Automatically selected master valkey-masters-0.valkey-masters.valkey.svc.cluster.local:6379
>>> Send CLUSTER MEET to node valkey-replicas-0.valkey-replicas.valkey.svc.cluster.local:6379 to make it join the cluster.
Waiting for the cluster to join

>>> Configure node as replica of valkey-masters-0.valkey-masters.valkey.svc.cluster.local:6379.
[OK] New node added correctly.
>>> Adding node valkey-replicas-1.valkey-replicas.valkey.svc.cluster.local:6379 to cluster valkey-masters-1.valkey-masters.valkey.svc.cluster.local:6379
>>> Performing Cluster Check (using node valkey-masters-1.valkey-masters.valkey.svc.cluster.local:6379)
M: fd1fb98db83976478e05edd3d2a02f9a13badd80 valkey-masters-1.valkey-masters.valkey.svc.cluster.local:6379
   slots:[5461-10922] (5462 slots) master
S: 0ebceb60cbcc31da9040159440a1f4856b992907 10.224.0.224:6379
   slots: (0 slots) slave
   replicates ee6ac1d00d3f016b6f46c7ce11199bc1a7809a35
M: ea47bf57ae7080ef03164a4d48b662c7b4c8770e 10.224.0.176:6379
   slots:[10923-16383] (5461 slots) master
M: ee6ac1d00d3f016b6f46c7ce11199bc1a7809a35 10.224.0.14:6379
   slots:[0-5460] (5461 slots) master
   1 additional replica(s)
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.
Automatically selected master valkey-masters-1.valkey-masters.valkey.svc.cluster.local:6379
>>> Send CLUSTER MEET to node valkey-replicas-1.valkey-replicas.valkey.svc.cluster.local:6379 to make it join the cluster.
Waiting for the cluster to join

>>> Configure node as replica of valkey-masters-1.valkey-masters.valkey.svc.cluster.local:6379.
[OK] New node added correctly.
>>> Adding node valkey-replicas-2.valkey-replicas.valkey.svc.cluster.local:6379 to cluster valkey-masters-2.valkey-masters.valkey.svc.cluster.local:6379
>>> Performing Cluster Check (using node valkey-masters-2.valkey-masters.valkey.svc.cluster.local:6379)
M: ea47bf57ae7080ef03164a4d48b662c7b4c8770e valkey-masters-2.valkey-masters.valkey.svc.cluster.local:6379
   slots:[10923-16383] (5461 slots) master
S: 0ebceb60cbcc31da9040159440a1f4856b992907 10.224.0.224:6379
   slots: (0 slots) slave
   replicates ee6ac1d00d3f016b6f46c7ce11199bc1a7809a35
S: fa44edff683e2e01ee5c87233f9f3bc35c205dce 10.224.0.103:6379
   slots: (0 slots) slave
   replicates fd1fb98db83976478e05edd3d2a02f9a13badd80
M: ee6ac1d00d3f016b6f46c7ce11199bc1a7809a35 10.224.0.14:6379
   slots:[0-5460] (5461 slots) master
   1 additional replica(s)
M: fd1fb98db83976478e05edd3d2a02f9a13badd80 10.224.0.247:6379
   slots:[5461-10922] (5462 slots) master
   1 additional replica(s)
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.
Automatically selected master valkey-masters-2.valkey-masters.valkey.svc.cluster.local:6379
>>> Send CLUSTER MEET to node valkey-replicas-2.valkey-replicas.valkey.svc.cluster.local:6379 to make it join the cluster.
Waiting for the cluster to join

>>> Configure node as replica of valkey-masters-2.valkey-masters.valkey.svc.cluster.local:6379.
[OK] New node added correctly.

  3. 다음 명령을 사용하여 Pod의 역할을 확인합니다.

    for x in $(seq 0 2); do echo "valkey-masters-$x"; kubectl exec -n valkey valkey-masters-$x  -- valkey-cli --pass ${SECRET} role; echo; done
for x in $(seq 0 2); do echo "valkey-replicas-$x"; kubectl exec -n valkey valkey-replicas-$x -- valkey-cli --pass ${SECRET} role; echo; done

    예제 출력:

    valkey-masters-0
master
84
10.224.0.224
6379
84

valkey-masters-1
master
84
10.224.0.103
6379
84

valkey-masters-2
master
70
10.224.0.200
6379
70

valkey-replicas-0
slave
10.224.0.14
6379
connected
98

valkey-replicas-1
slave
10.224.0.247
6379
connected
98

valkey-replicas-2
slave
10.224.0.176
6379
connected
84

다음 단계

AKS(Azure Kubernetes Service)에서 오픈 소스 소프트웨어를 배포하는 방법에 대한 자세한 내용은 다음 문서를 참조하세요.

참가자

Microsoft는 이 문서를 유지 관리합니다. 다음 기여자는 원래 그것을 썼다:

  • Nelly Kiboi | 서비스 엔지니어
  • Saverio Proto | 주요 고객 환경 엔지니어
  • Don High | 수석 고객 엔지니어
  • 라브리나 러빙 | 주 서비스 엔지니어
  • Ken Kilty | 수석 TPM
  • Russell de Pina | 수석 TPM
  • 콜린 믹슨 | 제품 관리자
  • Ketan Chawda | 선임 고객 엔지니어
  • Naveed Kharadi | 고객 환경 엔지니어
  • Erin Schaffer | 콘텐츠 개발자 2