System Center 2012 – Virtual Machine Manager (VMM) Error Codes [21000-21999]

Use Ctrl-F to find a specific code.

Some codes have a recommended action using PowerShell as well as the general action.

Links to other error code pages can be found at System Center 2012 – Virtual Machine Manager (VMM) Error Codes.

 

If you have additional information about an error, please add it to the "Additional Troubleshooting Information" column.

 

 

Code	Message	Recommended Action (in product)	Additional Troubleshooting Information
21001	Removing default VLAN from a XenServer is not supported.	This operation is not supported.
21002	Virtual network cards require a connection to a virtual network switch at all times on XenServer.	This operation is not supported.
21023	A service instance has already been deployed from the service configuration.\nService configuration: %Name;	Create a new service configuration, and then try again.
21100	Physical machine %SMBIOSGUID; is not expected for registration	Verify that the host profile matches with the physical machine information
21101	OS Deployment failed on physical machine %SMBIOSGUID;	Verify that the host profile matches with the physical machine information
21102	Can't uninstall WDS role, must restart	The role is not installed. Restart the machine.
21103	Can't uninstall WDS role	The role is not installed.
21104	Can't stop WDS service	Restart the machine.
21105	Can't find mapping between host group and logical network	Specify other parameters for IP address.
21106	Can't find an IP pool for IP address or logical network or subnet/VLAN	Specify other parameters for IP address.
21107	Physical Machine %SMBIOSGUID; did not register back with VMM Server in time	Make sure:\n1. The physical machine is configured to PXE boot\n2. The PXE server your physical machine is contacting has been added to VMM\n3. The physical machine is contacting the correct PXE server; you may have multiple PXE servers in your environment\n4. The physical machine's SMBIOS Guid in VMM matches the Guid reported during the PXE boot.\n5. The WindowsPE image placed on the PXE server by VMM is up to date; try to re-publish it\n6. The WDS server for this PXE request is configured and functioning properly\n7. Make sure there are no additional error messages on the physical machine's console\n8. The physical machine has a working connection to the network and is plugged into the correct subnet
21108	Physical machine service did not response in time	Restart
21109	Physical machine %Name; is running on a different bare metal machine than the one just deployed	Identify the physical machine and manually verify machine information
21110	Error encountered when communicating with physical machine deployment service	Support
21111	Domain to be joined is not found	Verify the domain join name
21112	Disk configuration is not valid	Verify the disk configuration in host profile object
21113	Unable to configure disk on physical machine %SMBIOSGUID; as requested in host profile	Verify that the hardware defined in the host profile matches with what is contained in the physical machine
21114	Unable to configure BCD record on physical machine %SMBIOSGUID;	Verify that the host profile matches with the physical machine information
21115	Driver tag cannot be empty string	Verify the tag is in valid format
21116	The disk configuration in host profile doesn't match the %Name; boot system on the physical machine	Verify the disk configuration of host profile is in correct format
21117	Cannot find an OS present in the VHD which supports native VHD boot	Verify the vhd file
21118	%Name; has already existed in AD	Uses a different computer name or bypass option
21119	The physical machine %SMBIOSGUID; doesn't join in AD using %Name; as computer name in time	Make sure there are no error messages on the physical machine console or in the Windows customization log
21120	OS deployment was successful, but DNS name resolution failed for %Name;	This usually results from the new computer name not being propagated to all DNS servers yet. This is normal for some environments and can take a long time. Once the DNS propagation is complete you can add this host to VMM as a Windows computer using the Add Resource wizard.
21121	Cannot resolve Domain DNS name for flat name %Name;	Make sure AD is reachable
21122	There is not enough disk space to convert the Dynamic VHD to Fixed VHD	Verify that the physical machine have enough disk space
21150	Failed to customize WinPE Image.	Check Server and WAIK installation, and files to be injected. Verify WinPE image, library and temp location.
21151	DISM.EXE failed to install package.	Verify package to be added. Please check dism.log for details
21152	File or Directory not found	Check Server and WAIK installation, and files to be injected. Verify WinPE image, library and temp location.
21153	File operation failed	Check if that file is in use or it is a valid path.
21154	WDS service is not found on the target machine	Make sure the WDS role is installed and the OS is Windows Server 2008 R2 or later
21155	WDS service isn't be initialized/configured	Perform initial configuration on WDS server
21156	Can't remove the PXE provider from the machine	Restart the machine.
21157	Authenticate domain join account to AD failed	Verify the domain join is correct
21158	PXE Server %Name; has already existed	Verify the PXE Server identity
21159	The name of domain to be joined mismatches with the domain specified in computer name	Verify the domain name is correct
21160	Using IP Address is not supported	Please provide computer NetBIOS name or DNS name
21161	No available VHD resource found within the host group	Make sure library servers are available
21162	There is no PXE server managed by this vmmserver, and OSD cannot continue	Please add a PXE server to this vmmserver
21164	The new WinPE image has been generated. However, it cannot be published to one of managed PXE Server because of agent error	See agent error for more information
21165	VMM cannot find PXE server %Name;	Make sure the computer name is correct
21166	The domain join runas account provided is not a valid domain user account for domain join purpose	Verify the user account in runas account is correct
21170	No commands are given to order.	Specify all existing commands when you need to get them ordered
21171	No such command exists in DB.	One or more of specified commands are not in DB
21172	Parameter OrderedCommand can only be used with VMHostProfile object	Change cmdlet parameters. Then try the operation again.
21173	Current operation is not supported by the host virtualization platform	Verify the host name
21174	Only VMM Administrators can be allowed to run script command on a host which is also the VMM server	Reconnect with a VMM Administrator account
21175	Custom WIM File %FileName; is not found	Check the location of custom WIM file
21176	ISO file path %FileName; is not valid	Please specify a full path to an ISO file to be generated
21177	Virtual Machine Manager has accepted the request from machine with SMBIOS GUID: % SMBIOSGUID; MAC: %MACAddress; and will deploy an OS.
21178	Virtual Machine Manager has aborted the request from machine with SMBIOS GUID: %S MBIOSGUID; MAC: %MACAddress; and will NOT deploy an OS.
21179	Virtual Machine Manager will not deploy an OS to computer with SMBIOS GUID: %SMBI OSGUID; MAC: %MACAddress; because the GUID does not match any that have pending OS deployments in VMM. The PXE request is being passed on to the next WDS PXE provider.
21180	PSCredential Type with a non-empty password is required for this parameter %Name; .	Provide PowerShell credential with a password and try the operation again.
21200	Error
21201	Another machine with the same SMBIOSGUID is found.	An SMBIOS GUID should uniquely identify the machine. Please provide the correct value or contact the machine manufacturer to help update the hardware with correct information.
21211	The host %VMHostName; is not configured to be controlled through out of band management from the service.	Provide the out of band management information using Set-SCVMHost if the host supports it.
21212	Connecting to the BMC with address %VMHostName; failed.	Check network connectivity or the management controller board state.
21213	The BMC address %VMHostName; returned a malformed message during an out of band management operation using IPMI. A required property "%PropertyName;" on a message of type "%ObjectName;" is incomplete or missing.	Contact your hardware vendor for the machine.
21214	The BMC address %VMHostName; is not implementing a VMM required SMASH profile: "% Name;"	Contact your hardware vendor for the machine.
21215	Cannot retrieve the CIM_ComputerSystem object associated to the VMM required SMASH profile: %Name;. BMC address: %VMHostName;	Contact your hardware vendor for the machine.
21216	VMHostGroup should be specified for host creation	Specify a host group.
21217	Specified logical network %LogicalNetworkName; has more than one subnet.	Specify a subnet or IP address.
21218	Provided IP address and subnet don't match.	Specify matching subnet and IP address.
21219	IP or subnet doesn't match to specified logical network.	Specify matching logical network and IP address or subnet.
21220	An out of band operation (%OutOfBandMgmtProtocol;) for the BMC %VMHostName; failed	Check network connectivity or the management controller board state.
21221	Requested IP address %IPAddress; isn't available in the pool.	Specify available IP address.
21222	Static IP address is requested, but no networking parameters are specified.	Specify a logical network, or subnet, or IP address.
21223	To assign a static IP address, the valid MAC address of a NIC should be specified.	Specify a valid MAC address for the NIC, which will get the static IP.
21224	The BMC address %VMHostName; returned an invalid SMBIOS GUID during an out of ban d management operation using %OutOfBandMgmtProtocol; protocol.	Contact your hardware vendor for the machine or check with your configuration provider vendor.
21225	The data for a FRU device (Id %Id;) returned from the BMC at %VMHostName; over IP MI can't be recognized.	Contact your hardware vendor for the machine.
21226	One of the encryption algorithms required by the BMC at %VMHostName; is not FIPS compliant as configured on the Windows OS hosting the VMM management server.	Check the configuration of the BMC at %VMHostName;.
21250	The specified subnet address %Address; is invalid. It has to be in the CDIR notation <IPv4 Net Address>|<IPv6 Net Address>/<subnet prefix length> and the subnet prefix length should render a non-empty IP range	Check the correctness of the provided subnet address
21251	A valid non-null configuration provider needs to be passed in if out of band protocol is set to Custom.	Check the cmdlet parameters
21252	A configuration provider parameter should not be provided if the out of band protocol is not set to Custom.	Check the cmdlet parameters
21253	BMC address not provided	Provide an address to connect to the target BMC
21254	BMC credential not provided	Provide credential to connect to the target BMC
21255	The provided configuration provider '%Name;' is not of out of band management type (OOB).	Pass the correct out of band configuration provider for the operation.
21399	(Internal error.)
21400	PowerShell subsystem is shutting down	Restart the Virtual Machine Manager service
21401	The PowerShell module %Name; for configuration provider %Id; could not be found	Check the configuration provider registration and contact your configuration provider publisher
21402	The PowerShell module %Name; for configuration provider %Id; was already loaded b y a different configuration provider. One provider module should be associated with one registration provider only	Check the configuration provider registration and contact your configuration provider publisher
21403	The PowerShell module %Name; for configuration provider %Id; cannot be loaded due to an error reported by VMM server's PowerShell subsystem.\n****\n %ActualException;\n****\n Error stream: %DetailedErrorMessage;	Check the configuration provider registration and contact your configuration provider publisher
21421	The configuration provider %Id; has an invalid registration: Property %PropertyName;	Check the registration of this provider and contact the publisher
21422	The configuration provider %Id; has an invalid registration: Property: %PropertyName;, Version: %FileVersion;)	Check the registration of this provider and contact the publisher
21423	The configuration provider %Id; requested for this operation was not found	Reinstall the configuration provider or reassociate the device with a different provider
21424	The configuration provider %Id; does not implement interface %InterfaceName;.	Contact configuration provider publisher
21425	The configuration provider %Id; does not implement %InterfaceName;::%Name; requested function or cmdlet.	Check the documentation for the configuration provider or contact the publisher support
21426	Execution of %InterfaceName;::%Name; on the configuration provider %Id; failed. Detailed exception:%DetailedErrorMessage;	Check the documentation for the configuration provider or contact the publisher support
21427	Execution of %InterfaceName;::%Name; on the configuration provider %Id; failed. PowerShell subsystem is shutting down.	Check the documentation for the configuration provider or contact the publisher support
21428	Execution of %InterfaceName;::%Name; on the configuration provider %Id; failed. The return type [%ObjectType2;] can't be converted to the type expected to be returned by the operation [%ObjectType;]	Check the documentation for the configuration provider or contact the publisher support
21429	Configuration provider %Name; can't be used for any operation because it failed to load or execute.	Contact the publisher support to fix or upgrade the failing provider .
21900	The service template %Name; cannot be modified or removed because one or more service instances or service configurations refer to it.	Ensure that there are no service instance or service configurations referring to this service template, and then try again.
21901	The parameters SaveState, RestoreState, PreService, and PostService can be used only with an application deployment object.	Change cmdlet parameters, and then try the operation again.
21902	The parameters FailOnMatch and WarnAndContinueOnMatch cannot be used together.	Change cmdlet parameters, and then try the operation again.
21903	A script command with the same type already exists.	Change the script type, and then try the operation again.
21904	The instance counts for the service tier template (%Name;) do not adhere to the permissible limits.	Ensure that the InstanceMinimumCount is less than or equal to the De faultInstanceCount, and that the DefaultInstanceCount is less than or equal to the InstanceMaximumCount.
21905	The script command output exceeded maximum allowed length of %Length;	Check script command parameters. Then try operation again.
21906	The service tier template (%Name;) cannot be modified or removed because its service template has one or more service instances or service configurations referencing it.	Ensure that there are no service instances or service configurations referencing the service template for this service tier template, and then try the operation.
21907	The script command standard output matched the regular expression (%Regex;) that is specified in the failure policy with the specified action when matched (%RegexMatchResult;). For more information, see the full standard output log (%FilePath;").	Check the standard output log to determine cause of the failure, and then try the operation again.
21908	The script command standard error matched the regular expression (%Regex;) that i s specified in the failure policy with the specified Action when matched (%RegexMatchResult;). For more information, see the full standard error log (%FilePath;").	Running the script command will be skipped when the job is restarted. To mitigate the effects of a script command failure, take corrective action.
21909	The script command exit code (%ExitCode;) matched the regular expression (%Regex; ) that is specified in the failure policy. Standard output log data: "%Value;"	Running the script command will be skipped when the job is restarted. To mitigate the effects of a script command failure, take corrective action.
21910	VMM did not successfully run the script command (%Command;) on the computer (%ComputerName;). A time-out occurred.	Running the script command will be skipped when the job is restarted. To mitigate the effects of a script command failure, take corrective action.
21911	The application profile (%Name;) already contains the specified operating system.	Ensure that the application profile does not contain the operating system, and then try again.
21912	The application profile (%Name;) does not contain the specified operating system.	Ensure that the application profile contains the operating system, and then try again.
21913	The script command cannot be run more than the specified number of times.\nNumber of times to run the command: %Count;	Change the script command configuration, and then try again.
21914	The script command that ran on the VMM management server cannot restart.	Change script command restart options, and then try again.
21915	The script command settings AlwaysReboot and RestartScriptOnExitCodeReboot are not valid for the command that ran on the server.	Change script command settings, and then try again.
21916	The application package type (%Name;) does not match the type of application deployment.	Ensure that the application package type matches the application deployment type, and then try again.
21917	The specified SQL Server Authentication type %Name; is not valid.	Ensure that the parameter is valid and try again.
21918	The service template (%Name;) cannot be applied as the pending service template because its name is different from the service template name for the service or its release is not different the from service template release for the service.	Ensure that the pending service template is cloned from the service template for the service, and then try again.
21919	The operation cannot be performed on the service (%Name;) because it is not in the Deployed Service state.	Ensure that the service is in the Deployed Service state, and then try again.
21920	The operation cannot be performed on the service (%Name;) because it has an outstanding servicing request and is in servicing mode.	Ensure that the service is not in servicing mode, and then try again.
21921	The operation cannot be performed on the service (%Name;) because it is not in a valid state for servicing.	Ensure that the service is in the Deployed Service state, and then try again.
21922	The -PendingServiceTemplate, -CommitPendingServiceTemplate and -DismissPendingSer viceTemplate parameters are mutually exclusive.	Resolve the conflict, and then try the operation again.
21924	One or more virtual machine configurations in the service configuration)%Name;) do not have a virtual machine host specified.	Ensure that all virtual machine configurations have a virtual machine host assigned to them, and retry the operation.
21925	The -NoConnectedHost and -VMHost parameters are mutually exclusive.	Resolve the conflict, and then try the operation again.
21926	The application setting name is not valid.	Use a valid application package, and then try the operation again.
21927	The application package cannot be deployed.	Use a valid application package, and then try the operation again.
21928	The application setting type (%Name;) is not valid.	Ensure that the application package is valid, and then try again.
21929	The application setting for the object type (%ObjectType;) does not allow changes .	Ensure that the application setting allows changes, and then try again.
21930	The operation cannot be performed because the service tier template (%Name;) could not be found in the pending service template (%FriendlyName;).	Ensure that the service tier template exists in the service template, and then try the operation again.
21931	The operation cannot be performed because the number of virtual machines in the service tier templates for the source template and the pending service template differ.	Please ensure that the number of virtual machines in the service tie r templates is the same in the source template and the pending service template, and then try the operation again.
21932	High availability setting changes to the service tier template (%Name;) during servicing are not supported and will be ignored.	Make any high availability setting changes after the servicing operation is complete.
21933	Changes to Deployment Order, DefaultInstanceCount, InstanceMaximumCount and Insta nceMinimumCount settings in the service tier template (%Name;) during servicing are not supported and will be ignored.	Make any changes to the settings after the servicing operation is complete.
21934	Only changes to the server roles and server features in operating system profiles are allowed during servicing. Other operating system profile changes to the service tier template (%Name;) during servicing are not supported and will be ignored.	Make any required changes after the servicing operation is complete.
21935	Changes to the virtual disk drives in the service tier template (%Name;) during servicing are not supported and will be ignored.	Make any required changes after the servicing operation is complete.
21936	The addition of SCSI adapters to the service tier template (%Name;) is allowed during servicing. Any other changes to SCSI adapters are not supported and will be ignored.	Make any required changes after the servicing operation is complete.
21937	Changes to virtual network adapters in the service tier template (%Name;) are not supported during servicing and will be ignored.	Make any required changes after the servicing operation is complete.
21938	No Fabric diff provider was found for the service (%Name;).	Contact your support personnel for further help.
21939	Service setting %Name; has conflicting data with referencing setting %FriendlyName;.	Check all settings that refer to the service setting in service template.
21940	The service setting '%Name;' became unencrypted and its data will be cleared.	BLANK
21941	The service setting in the service configuration, and the pending service setting in the service can change only the value.	BLANK
21942	Service settings in the service cannot be changed.	BLANK
21943	Administrator credentials were not specified for the computer (%Name;).	Ensure that administrator credentials are specified, and then try the operation again.
21944	The command Get-SCServicingScript returned an error: %ActualException;.	Contact your support personnel for further help.
21946	VMM could not access the client object (ID: %Id;) while generating the servicing script.	Contact your support personnel for further help.
21947	The script command (%Command;) was executed on the computer (%ComputerName;) and returned a result exit code (%ExitCode;).
21948	The script command cannot be run because computer name wasn't detected for the virtual machine (%VMName;).	Check that integration services are installed on the virtual machine %VMName;.
21949	The service template (%Name;) must contain one or more service tier templates.	Ensure that there is at least one service tier template in the service template, and then try the operation again.
21951	The service settings in the service template (%Name;) need to be updated.	Retry the operation with appropriate flags that update service settings of the service template.
21952	Application deployment failed for one or more tiers or application hosts in the service (%Name;). Check job logs to get more information on the failed operation.	Check error messages and retry the operation if needed.
21953	Two or more virtual machine configurations in the service configuration (%Name;) have the same computer name assigned.	Ensure that each virtual machine configuration has unique computer name before deploying the service.
21954	The location and host cannot be specified for the virtual machine configuration ( %Name;) because it is configured to be hosted on a private cloud.	Ensure that the virtual machine configuration does not contain these settings and retry the operation.
21955	The service setting (%Name;) will be added.	N/A
21956	The service setting (%Name;) will be removed.	N/A
21957	The service setting (%Name;) is referenced but is not provided a value.	Add a value to the referenced service setting, and then try again.
21958	A valid computer name has not been specified for the virtual machine guest.	Ensure that a valid computer name has been specified, and the try the operation again.
21959	The template (%Name;) is currently associated with a service tier template and cannot be modified or removed.	To modify the template, create a new virtual machine template with the required modification and associate it with the service tier template. To remove the service tier template and its associated objects, use the Remove-SCComputerTierTemplate command.
21960	The operation cannot be performed on the service (%Name;) because one or more of its virtual machines in the service tier (%FriendlyName;) is not running or cannot be contacted.	Ensure that the service has Virtual Machines that are in the running state, and then try again.
21961	The service tier (%Name;) has a single upgrade domain level. Servicing this service tier might result in all of the tier's virtual machines being taken offline as part of the servicing operation.	BLANK
21962	The operation cannot be performed on the service (%Name;) because it is not in servicing mode.	Ensure that the service is in servicing mode, and then try the operation again.
21963	The operation cannot be performed on the service (%Name;) because it is in servicing mode.	Ensure that the service is not in servicing mode, and then try the operation again.
21964	The operation cannot be performed on the virtual machine (%Name;) because it is associated with a service in servicing mode.	Ensure that the service is not in servicing mode, and then try the operation again.
21965	One or more settings specified for the virtual hard disk configuration are not supported for the source virtual disk drives.	BLANK
21966	The specified IP address pool is not of the expected IP address protocol version for the destination pool.	Ensure that the static IP addresses of type IPv4 and IPv6 are assigned to IPV4AddressPool and IPV6AddressPool respectively.
21967	The specified IP address is not of the expected IP address protocol version.	Ensure that the correct address protocol version is specified for the IP address of in the virtual network adapter configuration.
21968	JobGroup is supported only for the Application object type.	Use JobGroup for the Application object type.
21969	The service template (%Name;) cannot be applied as the pending service template because its name is different from the service template name for the service.	Ensure that the pending service template is same or cloned from the service template for the service, and then try again.
21970	The specified change on the object (%Name;) is not allowed.	Ensure that no service configuration or service is referencing the object.
21971	The specified SQL Server configuration file (%Name;) cannot be found.	Ensure that the specified SQL Server configuration file exists.
21972	The specified SQL Server configuration file (%Name;) is empty or not valid.	Ensure that the specified SQL Server configuration file is valid or empty.
21973	The specified SQL Server configuration file (%Name;) is empty or not valid.	Ensure that the specified entry in SQL Server configuration file has a valid value.
21974	The servicing step (%Count; %TaskDescription;), after the difference calculation between the service templates, was skipped during the servicing of this service.	Ensure that the any effects of skipping the servicing step are mitigated.
21975	VMM failed to write to the SQL Server configuration file (%Name;).	Verify that there is sufficient disk space on the VMM management server, and then try again.
21976	The Windows folder was not found on the virtual machine (%Name;).	n/a
21977	Deploying applications as part of a service deployment requires a valid domain.	Ensure that valid domains or service settings are specified as part of the virtual machine templates.
21978	The template (%Name;) should contain at least one virtual hard disk.	Ensure that there is at least one virtual hard disk in the hardware profile in the template, and then try again.
21979	The template (%Name;) must contain at least one virtual hard disk, when customization is required.	Ensure that there is at least one virtual hard disk in the template, and then try again.
21980	The template (%Name;) is not connected to any logical network.	Ensure that there is at least one logical network present in the tem plate, and then try again.
21981	The template (%Name;) does not contain a product key.	Ensure that there is a valid product key present in the template, and then try again.
21982	The template (%Name;) contains an empty Administrator password.	Ensure that there is a valid password present in the template, and then try again.
21983	The template (%Name;) does not contain a full name.	Ensure that there is a valid name present in the template, and then try again.
21984	The library resource (%Name;) located on the library share (%ShareName;) is in the Missing state.	Ensure that the resource is present in the library, and then try again.
21985	virtual IP address (VIP) template changes made to load balancer templates that are part of the service tier template (%Name;) are not supported for servicing and will be ignored.	Make any required changes after the servicing operation is complete.
21988	The template (%Name;) must contain a storage classification on its virtual disk ( %DiskName;).	Ensure that storage classification is present in the virtual disk of the template, and then try again.
21989	No Run As account was found for the specified scope in Run As profile (%Name;)	Add an appropriate Run As account association to the Run As profile, and then try again.
21990	The current number of virtual machine instances in the service tier (%Name;) is not within the valid range between the InstanceMinimumCount and the InstanceMaximumCount.	Ensure that the number of virtual machine instances is within the valid range for the service tier.
21991	The service tier (%FriendlyName;) already exists as part of the service (%Name;).	Specify a unique name for the service tier, and then try the operation again.
21992	The instance counts for the service tier (%Name;) do not adhere to the permissible limits.	Ensure that the InstanceMinimumCount is less than or equal to the In stanceMaximumCount.
21993	The status of the service (%Name;) indicates that it needs attention.	Review the errors associated with the service tiers or virtual machines to determine why they are in the Needs Attention state, and then take any required corrective action.
21994	The server feature (%Name;) already exists in the specified guest operating system profile or in the template (%FriendlyName;).	Ensure that the specified guest operating system profile or template does not contain the server feature, and try the operation again.
21995	The server feature (%Name;) does not exist in the specified guest operating system profile or in the template %FriendlyName;.	Ensure that the specified guest operating system profile or template contain the server features, and try the operation again.
21996	Unable to store the virtual machine (%VMName;) on the library server (%ServerName ;). The virtual machine is in a DeploymentFailed state.	Transition the virtual machine out of the failed state, and then try the operation again.
21997	The operation cannot be performed on the service (%Name;) because it is in a ServicingFailed state.	Ensure that the service is transitioned out of the ServicingFailed state, and then try again.
21998	An application (%FriendlyName;) was created in the database when the pending service template was applied to the service (%ServiceName;).	Ensure that the proper application also exists on the virtual machine (%Name;).
21999	An application (%FriendlyName;) was created in the database when the pending service template was dismissed for the service (%ServiceName;).	Ensure that the proper application also exists on the virtual machine (%Name;).