About the ACCESS_MASK Structure

아티클
04/01/2010

Unless otherwise specified, references in this document are from the Windows Software Development Toolkit (SDK) (v7.0) and the Windows Driver Kit (WDK) (v7600.16385.0), which defines at least 46 mask sets and 500+ bit flag value declarations. The document attached to this blog entry contains extensive toolkit header extracts and MSDN Library cross-references.

The ACCESS_MASK structure is defined in https://msdn.microsoft.com/en-us/library/aa374892.aspx, and is declared in WinNT.h ([SDK], [WDK]).

The ACCESS_MASK data type is a 32-bit (double word) flag set that is the primary means of specifying (encoding) the requested or granted access to a (securable) object by a user. Specifically, it is a value that defines standard, specific, and generic rights used in [Access Control Entries] (ACEs) as well as parameters to Windows API functions.

A securable object is an object that can have a security descriptor ([Security Descriptors]). All named Windows objects are securable. Some unnamed objects, such as process and thread objects, can have security descriptors too. For most securable objects, you can specify an object's security descriptor in the function call that creates the object. For example, you can specify a security descriptor in the CreateFile and CreateProcess functions.

Each type of securable object defines its own set of specific access rights and its own mapping of generic access rights. For information about the specific and generic access rights for each type of securable object, see the overview for that type of object [Securable Objects].

The following is a list of some common securable objects, from "Windows Internals^®, Fifth Edition", Microsoft Press, 2009, Library of Congress Control Number 2009927697, p458:

1. Files, directories and volumes (NTFS file system)

2. Devices

3. Mailslots

4. Named and anonymous pipes

5. Jobs

6. Processes

7. Threads

8. Events, keyed events and event pairs

9. Mutexes, semaphores

10. Shared memory sections

11. I/O completion ports

12. LPC ports

13. Waitable timers

14. Access tokens

15. Windows stations

16. Desktops

17. Network shares

18. Services

1 ACCESS_MASK

The general rule – for proper Windows executable citizenship – when setting ACCESS_MASK flags, is to always use as few flags as possible. Securable object creation is, of course, a case where this rule may not apply. Other popular (and no doubt necessary) exceptions involve temporary files, configuration file management, backup operations and so on.

Of special note is the MAXIMUM_ALLOWED bit, which is generally used with the AccessCheck(…) function to determine whether a security descriptor grants a specified set of access rights to the client identified by an access token. Typically, server applications use this function to check access to a private object.

As noted previously, each type of securable object has its own defined set of specific access rights; in almost all cases, these rights include a definition for all bits valid on the underlying object. These should ideally match the result of a call to AccessCheck(…) – if and only if the caller has full control permissions on the object. For example, File Security and Access Rights defines the following.

#define FILE_ALL_ACCESS (STANDARD_RIGHTS_REQUIRED | SYNCHRONIZE | 0x1FF)

STANDARD_RIGHTS_REQUIRED is a mask meant to be used when defining access masks for object types – that is to say, the set of access masks that all securable objects must support (this value is the set of flags defined as DELETE, READ_CONTROL, WRITE_DAC and WRITE_OWNER).

From WinNT.h ([SDK], [WDK]) (with modifications for clarity, and to show the ‘MA’ bit):

// Define the access mask as a longword sized structure divided up as

// follows:

// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1

// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0

// +-------+-------+---------------+-------------------------------+

// +-------+-------+---------------+-------------------------------+

// |G|G|G|G|Res|M|A|Res’d|S|W|W|R|D| |

// |R|W|E|A|’d |A|S|Res’d|Y|O|D|C|E| |

// +-------+-------+---------------+-------------------------------+

// typedef struct _ACCESS_MASK {

// WORD SpecificRights;

// BYTE StandardRights;

// BYTE AccessSystemAcl : 1;

// BYTE Reserved : 3;

// BYTE GenericAll : 1;

// BYTE GenericExecute : 1;

// BYTE GenericWrite : 1;

// BYTE GenericRead : 1;

// } ACCESS_MASK;

// typedef ACCESS_MASK *PACCESS_MASK;

// but to make life simple for programmer's we'll allow them to specify

// a desired access mask by simply OR'ing together multiple single rights

// and treat an access mask as a DWORD. For example

// DesiredAccess = DELETE | READ_CONTROL

// So we'll declare ACCESS_MASK as DWORD

// begin_wdm

typedef DWORD ACCESS_MASK;

typedef ACCESS_MASK *PACCESS_MASK;

The bits in positions 28 through 31 are generic rights that can be mapped to object-specific user rights by the resource manager for the requested object. The mapping of these rights is implementation-specific.

The bits in positions 24 and 25 are for maximum allowed and access system security rights.

The bits in positions 0 through 15 are standard rights that are common to all objects.

The document attached to this blog entry contains a variant of the above, with all flags defined.

2 Generic Access Rights

The four high-order bits of an ACCESS_MASK specify generic access rights. Each type of securable object maps these bits to a set of its standard and object-specific access rights.

For example, a Windows file object maps the GENERIC_READ bit to the READ_CONTROL and SYNCHRONIZE standard access rights and to the FILE_READ_DATA, FILE_READ_EA, and FILE_READ_ATTRIBUTES object-specific access rights. Other types of objects map the GENERIC_READ bit to whatever set of access rights is appropriate for that type of object.

You can use generic access rights to specify the type of access you need when you are opening a handle to an object. This is typically simpler than specifying all the corresponding standard and specific rights.

Applications that define private securable objects can also use the generic access rights.

Constant	Value	Description
GENERIC_ALL	0x10000000	The right to read, write, and execute the object.
GENERIC_EXECUTE	0x20000000	The right to execute or alternatively look into the object.
GENERIC_WRITE	0x40000000	The right to write the information maintained by the object.
GENERIC_READ	0x80000000	The right to read the information maintained by the object.

From WinNT.h ([SDK], [WDK]):

// These are the generic Rights

#define GENERIC_READ (0x80000000L)

#define GENERIC_WRITE (0x40000000L)

#define GENERIC_EXECUTE (0x20000000L)

#define GENERIC_ALL (0x10000000L)

3 ACCESS_SYSTEM_SECURITY

Access system security (ACCESS_SYSTEM_SECURITY) is used to request or indicate access to a system access control list (SACL). This is also known as the SACL Access Right ([SACL Access Right]).

This type of access requires the calling process to have the SE_SECURITY_NAME (Manage auditing and security log) privilege. If this flag is set in the access mask of an audit access ACE (successful or unsuccessful access), the SACL access will be audited ([ACCESS_MASK]).

The system grants this access right only if the SE_SECURITY_NAME privilege is enabled in the access token of the requesting thread ([SACL Access Right]).

If a backup application must have access to the system-level access control settings, the ACCESS_SYSTEM_SECURITY flag must be specified in the dwDesiredAccess parameter value passed to CreateFile ([File Access Rights]).

Privileges determine the type of system operations that a user account can perform. An administrator assigns privileges to user and group accounts. Each user's privileges include those granted to the user and to the groups to which the user belongs. The SE_BACKUP_NAME and SE_RESTORE_NAME privileges are required to grant ACCESS_SYSTEM_SECURITY for backup operations ([Privilege Constants]).

To read the SACL from a security descriptor, the calling process must have been granted ACCESS_SYSTEM_SECURITY access when the handle was opened. The proper way to get this access is to enable the SE_SECURITY_NAME privilege ([Privilege Constants]) in the caller's current token, open the handle for ACCESS_SYSTEM_SECURITY access, and then disable the privilege ([GetSecurityInfo]).

From WinNT.h ([SDK], [WDK]):

// AccessSystemAcl access type

#define ACCESS_SYSTEM_SECURITY (0x01000000L)

4 MAXIMUM_ALLOWED

The MAXIMUM_ALLOWED access type is generally used with the AccessCheck(…) function to determine whether a security descriptor grants a specified set of access rights to the client identified by an access token. Typically, server applications use this function to check access to a private object. Note that MAXIMUM_ALLOWED cannot be used in an ACE (see access control entries).

When using AccessCheck(…) for this purpose, perform the following steps:

1. Obtain a security descriptor that has owner, group, and DACL information.

If you are not impersonating a client, obtain an impersonation token by calling ImpersonateSelf(…). This token is passed as the client token in the AccessCheck(…) call.

2. Create a generic mapping structure ([GENERIC_MAPPING]). The contents of this structure will vary depending on the object being used.

3. Call AccessCheck(…) and request MAXIMUM_ALLOWED as the desired access.

If the AccessCheck(…) call succeeds after the above steps have been completed, the GrantedAccess parameter contains a mask of the object-specific rights that are granted by the security descriptor.

When used in an Access Request operation, the Maximum Allowed bit grants the requestor the maximum permissions allowed to the object through the Access Check Algorithm. This bit can only be requested, it cannot be set in an ACE ([MS-DTYP 2.4.3]).

When used to set the Security Descriptor on an object, the Maximum Allowed bit in the SECURITY_DESCRIPTOR has no meaning. The MA bit SHOULD NOT be set and SHOULD be ignored when part of a SECURITY_DESCRIPTOR structure ([MS-DTYP 2.4.3]).

From WinNT.h ([SDK], [WDK]):

// MaximumAllowed access type

#define MAXIMUM_ALLOWED (0x02000000L)

5 Standard Access Rights

Standard access rights are those rights corresponding to operations common to most types of securable objects.

Access Right	Value	Description
DELETE	0x00010000	The right to delete the object.
READ_CONTROL	0x00020000	The right to read the information in the file or directory object's security descriptor. This does not include the information in the SACL.
WRITE_DAC	0x00040000	The right to modify the DACL in the object's security descriptor.
WRITE_OWNER	0x00080000	The right to change the owner in the object's security descriptor.
SYNCHRONIZE	0x00100000	The right to use the object for synchronization. This enables a thread to wait until the object is in the signaled state. Some object types do not support this access right.
STANDARD_RIGHTS_REQUIRED	0x000F0000	Combines DELETE, READ_CONTROL, WRITE_DAC, and WRITE_OWNER access. ¹
STANDARD_RIGHTS_READ	READ_CONTROL	Currently defined to equal READ_CONTROL.
STANDARD_RIGHTS_WRITE	READ_CONTROL	Currently defined to equal READ_CONTROL.
STANDARD_RIGHTS_EXECUTE	READ_CONTROL	Currently defined to equal READ_CONTROL.
STANDARD_RIGHTS_ALL	0x001F0000	Combines DELETE, READ_CONTROL, WRITE_DAC, WRITE_OWNER, and SYNCHRONIZE access.

¹ STANDARD_RIGHTS_REQUIRED is a mask meant to be used when defining access masks for object types - it's the set of access masks that all securable objects must support.

From WinNT.h ([SDK], [WDK]):

// The following are masks for the predefined standard access types

#define DELETE (0x00010000L)

#define READ_CONTROL (0x00020000L)

#define WRITE_DAC (0x00040000L)

#define WRITE_OWNER (0x00080000L)

#define SYNCHRONIZE (0x00100000L)

#define STANDARD_RIGHTS_REQUIRED (0x000F0000L)

#define STANDARD_RIGHTS_READ (READ_CONTROL)

#define STANDARD_RIGHTS_WRITE (READ_CONTROL)

#define STANDARD_RIGHTS_EXECUTE (READ_CONTROL)

#define STANDARD_RIGHTS_ALL (0x001F0000L)

6 Specific Access Rights

Each type of securable object has a set of access rights that correspond to operations specific to that type of object. These rights occupy the low order 16 bits of the ACCESS_MASK data type.

From WinNT.h ([SDK], [WDK]):

#define SPECIFIC_RIGHTS_ALL (0x0000FFFFL)

The remainder of this text lists a quorum of ACCESS_MASK definition sets available online (MSDN), as well as in the Windows SDK and the Windows Driver Kit).